[netCDF #MBG-731605]: Problem installing netcdf v3.3.1.1

This is a known issue related to a change in our test server
configuration since version 4.3.1.1. The 4.3.2 release fixes it by
pointing directly to our new test servers. So, the failure is on our
end, not yours.

With version 4.3.1.1, you can complete testing and installation of
the netCDF C library and utilities by following these steps:

  1. Run "make clean" in the top level directory of your source netCDF
     source (or unpack the source again in a new source directory)

  2. Run the "configure" script again, but this time add the following
     option to whatever options you previously specified:

       --disable-dap-remote-tests 

  3. Run "make check" and verify that it now completes successfully.

  4. Run "make install", or "sudo make install" if needed.

That should get you past the problem with our test server and allow
the installation to complete successfully.  Please let us know if you
encounter additional errors.

--Russ

> Please find the attached entire "make check install" log.
> 
> There were two failures in tests. Following are the last few lines. (Also in 
> error message file)
> 
> 
> PASS: tst_ncdap3.sh
> FAIL: tst_remote3.sh
> PASS: tst_formatx.sh
> PASS: t_dap3a
> PASS: test_cvt3
> PASS: test_vara
> PASS: test_partvar
> PASS: test_varm3
> PASS: test_nstride_cached
> FAIL: t_auth
> PASS: t_misc
> make[6]: Entering directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make all-recursive
> make[7]: Entering directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> Making all in testdata3
> make[8]: Entering directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/testdata3'
> make[8]: Nothing to be done for `all'.
> make[8]: Leaving directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/testdata3'
> Making all in expected3
> make[8]: Entering directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expected3'
> make[8]: Nothing to be done for `all'.
> make[8]: Leaving directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expected3'
> Making all in expected4
> make[8]: Entering directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expected4'
> make[8]: Nothing to be done for `all'.
> make[8]: Leaving directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expected4'
> Making all in expectremote3
> make[8]: Entering directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expectremote3'
> make[8]: Nothing to be done for `all'.
> make[8]: Leaving directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expectremote3'
> Making all in expectremote4
> make[8]: Entering directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expectremote4'
> make[8]: Nothing to be done for `all'.
> make[8]: Leaving directory 
> `/opt/softwares/netcdf-4.3.1.1/ncdap_test/expectremote4'
> make[8]: Entering directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make[8]: Nothing to be done for `all-am'.
> make[8]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make[7]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make[6]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> ============================================================================
> Testsuite summary for netCDF 4.3.1.1
> ============================================================================
> # TOTAL: 12
> # PASS: 10
> # SKIP: 0
> # XFAIL: 0
> # FAIL: 2
> # XPASS: 0
> # ERROR: 0
> ============================================================================
> See ncdap_test/test-suite.log
> Please report to address@hidden
> ============================================================================
> make[5]: *** [test-suite.log] Error 1
> make[5]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make[4]: *** [check-TESTS] Error 2
> make[4]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make[3]: *** [check-am] Error 2
> make[3]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make[2]: *** [check-recursive] Error 1
> make[2]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make[1]: *** [check] Error 2
> make[1]: Leaving directory `/opt/softwares/netcdf-4.3.1.1/ncdap_test'
> make: *** [check-recursive] Error 1
> 
> 
> 
> ----- Original Message -----
> 
> From: "Unidata netCDF Support" <address@hidden>
> To: address@hidden
> Cc: address@hidden
> Sent: Friday, August 29, 2014 1:54:20 AM
> Subject: [netCDF #MBG-731605]: Problem installing netcdf v3.3.1.1
> 
> > I have tried to install netcdf in a new Pc and there were some errors while 
> > installation.
> > I have also attached the log file.
> 
> The config.log you attached didn't indicate any build errors. It completed
> successfully after building all the necessary Makefiles. Error messages
> in config.log from a successful configure can be ignored, as they result
> from determining properties of the platform and d3evelopment environment
> needed to generate the necessary Makefiles.
> 
> The test-suite.log file you attached also didn't seem to indicate any errors,
> though I'm not sure what the final line
> 
> .. contents:: :depth: 2
> 
> meant. Did "make check" complete without any actual errors? Warnings and
> XFAIL messages about expected failures can be ignored.
> 
> If "make check" didn't complete, then please send us its output, including
> whatever error message was emitted when it stopped.
> 
> 
> --Russ
> 
> Russ Rew UCAR Unidata Program
> address@hidden http://www.unidata.ucar.edu
> 
> 
> 
> Ticket Details
> ===================
> Ticket ID: MBG-731605
> Department: Support netCDF
> Priority: Normal
> Status: Closed
> 
> 
> 
> 
> --
> ---------------------------------------------------------------------
> Thanks and Regards
> ---------------------------------------------------------------------
> Piyush Bhardwaj
> SRF, Atmospheric Science Division
> ARIES Manora Peak, Nainital-263002
> Uttarakhand, India.
> 
> 

Russ Rew                                         UCAR Unidata Program
address@hidden                      http://www.unidata.ucar.edu



Ticket Details
===================
Ticket ID: MBG-731605
Department: Support netCDF
Priority: Normal
Status: Closed