[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[netCDF #ELI-872519]: netcdf-fortran-4.2
- Subject: [netCDF #ELI-872519]: netcdf-fortran-4.2
- Date: Thu, 24 Sep 2015 13:31:45 -0600
Taran,
> I am getting to a point where I think I am pretty close to getting it done.
> However, when I try to
> run "./configure ....." command without sudo, it does not write out
> config.log and config.status files.
> I tried to change permissions of config.log and config.status files. That
> does not seem to help and I think the files are created
> again with old permissions inside configure file.
The easiest thing would be to start over in a fresh build directory that you
own.
Otherwise, make sure the directory in which you are building has write
permissions
for you and is owned by you. For me, it's
$ cd ~/git//netcdf-fortran
$ ls -ld .
drwxr-xr-x 62 russ 2000 2108 Sep 23 14:28 . # not owned by root,
writable by me
You should be able to change the ownership and permissions of the directory
using
sudo.
Then just rm config.log and config.status files before running configure, and
the new
ones owned by you will be generated by the configure script.
--Russ
> address@hidden> wrote:
>
> > Taran,
> >
> > Instead of using ifort with sudo, I suggest you just *not* use sudo
> > when building netCDF until it comes time to install, then just use
> > "sudo make install" for that step.
> >
> > That way everything will build with the right environment, and will be
> > installed correctly, after "make" and "make check" work, and users
> > won't need to worry about sudo.
> >
> > --Russ
> >
> > > I think you are correct. When I did "sudo ifort --version", I got this
> > > result
> > >
> > >
> > ------------------------------------------------------------------------------------------------------------------
> > > gadar@igsagiegwstkal0:~$ sudo ifort --version
> > > GNU Fortran (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4
> > > Copyright (C) 2013 Free Software Foundation, Inc.
> > >
> > ------------------------------------------------------------------------------------------------------------------
> > >
> > > Now that means when I do sudo ./configure ...., it uses gfortran. I have
> > > "sourced"
> > > the path of ifort compiler in my .bashrc. I need to figure out how to use
> > > ifort with sudo.
> > >
> > > Thanks,
> > > Taran
> > >
> > > Taran
> > >
> > > address@hidden> wrote:
> > >
> > > > Taran,
> > > >
> > > > > It seems to show the right version of ifort after doing ifort
> > --version.
> > > > >
> > > >
> > ------------------------------------------------------------------------------------------------------------------
> > > > > gadar@igsagiegwstkal0:~/Documents/Development/SCRIP_COAWST$ ifort
> > > > --version
> > > > > ifort (IFORT) 15.0.3 20150407
> > > > > Copyright (C) 1985-2015 Intel Corporation. All rights reserved.
> > > > >
> > > >
> > -------------------------------------------------------------------------------------------------------------------
> > > > >
> > > > > I also tried " which ifort " and " which gfortran " respectively and
> > they
> > > > > give expected outputs
> > > > >
> > > >
> > ------------------------------------------------------------------------------------------------------------------
> > > > > gadar@igsagiegwstkal0:~/Documents/Development/SCRIP_COAWST$ which
> > ifort
> > > > > /opt/intel/composer_xe_2015.3.187/bin/intel64/ifort
> > > > >
> > > >
> > ------------------------------------------------------------------------------------------------------------------
> > > > >
> > > >
> > ------------------------------------------------------------------------------------------------------------------
> > > > > gadar@igsagiegwstkal0:~/Documents/Development/SCRIP_COAWST$ which
> > > > gfortran
> > > > > /usr/bin/gfortran
> > > > >
> > > >
> > ------------------------------------------------------------------------------------------------------------------
> > > >
> > > > Then you will have to figure out why, when you run the configure
> > script, it
> > > > shows gfortran runs when it invokes "ifort --version". It's something
> > in
> > > > your
> > > > environment or the way in which you run the configure script.
> > > >
> > > > You could probably debug the problem by just creating a little shell
> > script
> > > > that runs "ifort --version", and trying to run it under the same
> > > > conditions you
> > > > use to run configure. For example, if you run configure using sudo or
> > as
> > > > root
> > > > (not recommended because some environment variables aren't inherited by
> > > > root subshells), then run this little shell script the same way, and
> > see
> > > > if it fails
> > > > the same way. Then find and fix the cause of the problem, which may be
> > a
> > > > problem with your PATH, with the shell you are using, with a shell
> > alias,
> > > > with
> > > > symbolic link, or something else.
> > > >
> > > > Altrernatively, you can set FC and F77 to the absolute path for ifort
> > > > before
> > > > invoking configure and see if that works. We can't reproduce the
> > problem
> > > > here, so would still be interested if you discover the cause and let us
> > > > know.
> > > >
> > > > Thanks.
> > > >
> > > > --Russ
> > > >
> > > >
> > > >
> > > > > address@hidden> wrote:
> > > > >
> > > > > > Taran,
> > > > > >
> > > > > > Thanks for sending the config.log.
> > > > > >
> > > > > > The first thing I notice are these puzzling lines in that file:
> > > > > >
> > > > > > configure:4659: finding Fortran compiler (will not be used if
> > > > Fortran
> > > > > > API is not desired)
> > > > > > configure:4767: checking for Fortran compiler version
> > > > > > configure:4776: ifort --version >&5
> > > > > > GNU Fortran (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4
> > > > > > Copyright (C) 2013 Free Software Foundation, Inc.
> > > > > >
> > > > > > When you invoke "ifort --version" do you also get this output from
> > > > > > what is obviously gfortran? If so, try instead using an absolute
> > path
> > > > > > to the ifort compiler, to eliminate the possibility of a symbolic
> > link
> > > > or
> > > > > > shell alias or a weird PATH being used when the shell runs "ifort".
> > > > > >
> > > > > > I think when you find and correct that problem, rerunning configure
> > > > > > will use ifort.
> > > > > >
> > > > > > --Russ
> > > > > >
> > > > > > > Hi Russ,
> > > > > > >
> > > > > > > Firstly, I hope that I am replying back through the right email
> > > > address.
> > > > > > >
> > > > > > > Please find the config.log attached. Also, netcdf.mod was the
> > most
> > > > recent
> > > > > > > one. I have double checked that.
> > > > > > >
> > > > > > > Actually, the gfortran header that I have in the other netcdf.mod
> > > > that
> > > > > > was
> > > > > > > only with gfortran also has a similar, ie. large case header.
> > > > > > > That works fine though.
> > > > > > >
> > > > > > > thanks,
> > > > > > > Taran
> > > > > > >
> > > > > > > Taran
> > > > > > >
> > > > > > > address@hidden> wrote:
> > > > > > >
> > > > > > > > Hi Taran,
> > > > > > > >
> > > > > > > > From the configure output you sent in the configure.log
> > > > attachment, it
> > > > > > > > appears
> > > > > > > > that the configure script accepted your ifort specification
> > for the
> > > > > > > > Fortran compiler,
> > > > > > > > which you can see by grepping for "ifort" in that file. Another
> > > > way to
> > > > > > > > check is to
> > > > > > > > look at the output from "make" or "make check" to see what
> > > > compiler is
> > > > > > > > actually
> > > > > > > > being used to compile the library sources. If it's definitely
> > > > > > "gfortran"
> > > > > > > > rather than
> > > > > > > > "ifort", please send us the "config.log" created by the
> > configure
> > > > > > script
> > > > > > > > (not the
> > > > > > > > "configure.log" file you generated by redirecting the output of
> > > > > > configure)
> > > > > > > > for
> > > > > > > > further diagnosis.
> > > > > > > >
> > > > > > > > Also, is the NETCDF.mod file you are looking at from the
> > > > > > > > /usr/local/netcdf_ifort/
> > > > > > > > directory, and does it have approximately the same creation
> > time as
> > > > > > when
> > > > > > > > you ran "make install"? If not, you may be looking at a
> > different
> > > > > > > > netcdf.mod or
> > > > > > > > not have specified -I/usr/local/netcdf_ifort_include when
> > compiling
> > > > > > Fortran
> > > > > > > > applications with the newly installed library.
> > > > > > > >
> > > > > > > > Finally, when we build with gfortran, the resulting netcdf.mod
> > > > (it's
> > > > > > all
> > > > > > > > lower case
> > > > > > > > when created by gfortran) file doesn't have a header such as
> > the
> > > > one
> > > > > > you
> > > > > > > > sent,
> > > > > > > > which makes me thin that maybe the compiler that creates that
> > > > > > NETCDF.mod
> > > > > > > > file is derived from gfortran but may be part of ifort?
> > > > > > > >
> > > > > > > > --Russ
> > > > > > > >
> > > > > > > >
> > > > > > > > > I am trying to build the netcdf-fortran-4.2 on my local
> > machine.
> > > > I
> > > > > > > > earlier
> > > > > > > > > had a gfortran compiler and now recently installed an ifort
> > > > compiler.
> > > > > > > > When
> > > > > > > > > i try to configure netcdf-fortran with my ifort compiler, it
> > > > still
> > > > > > > > reverts
> > > > > > > > > back to gfortran compiler. I am using this command to
> > configure :
> > > > > > > > >
> > > > > > > > > sudo ./configure --prefix=/usr/local/netcdf_ifort FC=ifort
> > > > F90=ifort
> > > > > > > > > F77=ifort CC=gcc --enable-shared 2>&1 | tee configure.log
> > > > > > > > >
> > > > > > > > > I am also attaching the "configure.log". If you check inside
> > the
> > > > > > file on
> > > > > > > > > line, it still uses the GNU compiler. After doing a "make"
> > and
> > > > "make
> > > > > > > > > install", the resulting "netcdf.mod" shows that I used
> > > > "gfortran". I
> > > > > > am
> > > > > > > > > attaching the file as well.
> > > > > > > > >
> > > > > > > > > I am not sure why it is not getting configured with ifort
> > when I
> > > > > > specify
> > > > > > > > > the flags to use ifort.
> > > > > > > > >
> > > > > > > > > Any help is appreciated.
> > > > > > > > >
> > > > > > > > > thanks,
> > > > > > > > > Taran
> > > > > > > > >
> > > > > > > > >
> > > > > > > > Russ Rew UCAR Unidata
> > > > Program
> > > > > > > > address@hidden
> > > > http://www.unidata.ucar.edu
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Ticket Details
> > > > > > > > ===================
> > > > > > > > Ticket ID: ELI-872519
> > > > > > > > Department: Support netCDF
> > > > > > > > Priority: Normal
> > > > > > > > Status: Closed
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > > Russ Rew UCAR Unidata
> > Program
> > > > > > address@hidden
> > http://www.unidata.ucar.edu
> > > > > >
> > > > > >
> > > > > >
> > > > > > Ticket Details
> > > > > > ===================
> > > > > > Ticket ID: ELI-872519
> > > > > > Department: Support netCDF
> > > > > > Priority: Normal
> > > > > > Status: Closed
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > > Russ Rew UCAR Unidata Program
> > > > address@hidden http://www.unidata.ucar.edu
> > > >
> > > >
> > > >
> > > > Ticket Details
> > > > ===================
> > > > Ticket ID: ELI-872519
> > > > Department: Support netCDF
> > > > Priority: Normal
> > > > Status: Closed
> > > >
> > > >
> > >
> > >
> >
> > Russ Rew UCAR Unidata Program
> > address@hidden http://www.unidata.ucar.edu
> >
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: ELI-872519
> > Department: Support netCDF
> > Priority: Normal
> > Status: Closed
> >
> >
>
>
Russ Rew UCAR Unidata Program
address@hidden http://www.unidata.ucar.edu
Ticket Details
===================
Ticket ID: ELI-872519
Department: Support netCDF
Priority: Normal
Status: Closed