This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.
Hi Jae-Min, > While I was going through the steps, I learned that "make install" from > hdf-4.2.11 creates netcdf.f90, netcdf.h, netcdf.inc > > I think the netcdf.inc created here may have caused the problem with the > netcdf-fortran. I will email hdf support to see if I can replace them with > the ones created in netcdf. Thanks for tracking that down. I didn't know HDF4 installation installed a netcdf.inc by default. The instructions we provide for installing netCDF with HDF4 support: http://www.unidata.ucar.edu/netcdf/docs/getting_and_building_netcdf.html#build_hdf4 recommend using $ # Build and install HDF4 $ ./configure --enable-shared --disable-netcdf --disable-fortran --prefix=${H4DIR} $ make check $ make install so maybe the "--disable-netcdf" and "--disable-fortran" options for HDF4 avoid the installation of HDF's old version of netcdf.inc. --Russ > address@hidden> wrote: > > > Jae-Min, > > > > > Thank you for your insight. > > > > > > I have built netcdf 4.3.3.1 and the netcdf fortran 4.4.2 in the same > > > prefix, and I built the 4.3.3.1 before I built 4.4.2. do you think this > > > problem could have been caused by: > > > > > > 1. netcdf.inc being made into the prefix directory by 4.3.3.1 and then > > > 2. netcdf.inc for fortran was not made because the file with the same > > name > > > exists in the prefix already? > > > > No, because netCDF 4.3.3.1 only builds and installs the C library, so it > > has no netcdf.inc and doesn't install a file by that name in an include > > directory. It only installs at most these 3 C header files in the include > > directory: > > > > -rw-r--r-- 1 russ 2000 60074 Jun 12 15:03 netcdf.h > > -rw-r--r-- 1 russ 2000 2053 Jun 12 15:03 netcdf_meta.h > > -rw-r--r-- 1 russ 2000 2106 Jun 12 13:37 netcdf_mem.h > > > > Building and installing netCDF-Fortran 4.4.2 adds a bunch of > > other files to the include directory, but none of them overwrite > > any of the netCDF-C .h files: > > > > -rw-r--r-- 1 russ 2000 59877 Apr 22 13:38 netcdf.inc > > -rw-r--r-- 1 russ 2000 21991 Apr 22 13:38 netcdf.mod > > -rw-r--r-- 1 russ 2000 25219 Apr 22 13:38 netcdf4_f03.mod > > -rw-r--r-- 1 russ 2000 25086 Apr 22 13:38 netcdf4_nc_interfaces.mod > > -rw-r--r-- 1 russ 2000 5564 Apr 22 13:38 netcdf4_nf_interfaces.mod > > -rw-r--r-- 1 russ 2000 19848 Apr 22 13:38 netcdf_f03.mod > > -rw-r--r-- 1 russ 2000 22140 Apr 22 13:38 > > netcdf_fortv2_c_interfaces.mod > > -rw-r--r-- 1 russ 2000 4987 Apr 22 13:38 netcdf_nc_data.mod > > -rw-r--r-- 1 russ 2000 18574 Apr 22 13:38 netcdf_nc_interfaces.mod > > -rw-r--r-- 1 russ 2000 8787 Apr 22 13:38 netcdf_nf_data.mod > > -rw-r--r-- 1 russ 2000 10644 Apr 22 13:38 netcdf_nf_interfaces.mod > > -rw-r--r-- 1 russ 2000 483 Apr 22 13:38 typesizes.mod > > > > It's possible your install didn't put all these files in the include > > directory, > > depending on your compiler and configure options. > > > > --Russ > > > > > Thank you. > > > > > > Regards, > > > > > > > > > address@hidden> wrote: > > > > > > > You shouldn't have had to copy netcdf.inc from anywhere else. During > > > > the "make' for netcdf-fortran, it is supposed to be read from > > > > fortran/netcdf.inc in the sources (where you say you found it), and it > > > > is supposed to be copied to the include/ directory specified by > > > > --prefix as part of "make install", for use when compiling other > > > > Fortran programs that have an "include 'netcdf.inc'" and call netCDF > > > > Fortran functions. The netcdf.inc file doesn't change much between > > > > versions, so it's possible that using a netcdf.inc file from another > > > > version wouldn't cause any problems, but I can't guarantee that. No > > > > one else has reported that problem, as far as I know, and the software > > > > works OK on our test platforms, but if "make check" now works OK for > > > > you, it's probably OK to run "make install" and assume it's probably > > > > OK. > > > > > > > > --Russ > > > > > > > > > > > > > Sorry, I miswrote. By "prefix" where the netcdf.inc was found, I > > meant > > > > the > > > > > include folder within the prefix directory. > > > > > > > > > > Thank you. > > > > > > > > > > Regards, > > > > > Jae-Min > > > > > > > > > > On Thu, Jun 25, 2015 at 9:40 AM, Jae-Min Jo <address@hidden> > > > > wrote: > > > > > > > > > > > Hello Russ, > > > > > > > > > > > > As you have mentioned that netcdf.inc that was in > > > > > > ....../netcdf-fortran-4.4.2/fortran directory could not be found, I > > > > looked > > > > > > for it and found it in 2 different places (one in the fortran > > > > directory and > > > > > > the other in the prefix of both netcdf-4.3.3.1 and > > > > netcdf-fortran-4.4.2). I > > > > > > moved and replaced the one in fortran directory, and the make > > check for > > > > > > both netcdf-4.3.3.1 and netcdf-fortran-4.4.2 seems to work. Would > > > > there be > > > > > > a way of just making the netcdf.inc file go to prefix in the first > > > > place? > > > > > > if not, do you think manually placing the netcdf.inc file is a > > valid > > > > > > or reliable solution? > > > > > > > > > > > > Thank you for your help. > > > > > > > > > > > > Regards, > > > > > > Jae-Min > > > > > > > > > > > > address@hidden> wrote: > > > > > > > > > > > >> > Thank you for your reply. I have located the netcdf.inc in > > > > > >> > > > /lustre05/vol0/jojchi/Projects/REEMS/netcdf-fortran-4.4.2/fortran/ > > > > > >> > directory. I have put this in the LD_LIBRARY_PATH. It's not > > working > > > > yet > > > > > >> but > > > > > >> > I will try along the lines of looking for netcdf.inc and setting > > > > > >> > environment variables appropriately for the fortran compiler. > > > > > >> > > > > > >> Note that LD_LIBRARY_PATH is just a list of directories containing > > > > > >> libraries, not > > > > > >> include files. The CPPFLAGS environment variable contains -I > > options > > > > that > > > > > >> specify include file directories (among other things), so a typo > > in > > > > > >> CPPFLAGS > > > > > >> would be a more libely place to look for an error leading to a > > missing > > > > > >> include > > > > > >> file. > > > > > >> > > > > > >> --Russ > > > > > >> > > > > > >> > address@hidden> wrote: > > > > > >> > > > > > > >> > > Jae-Min, > > > > > >> > > > > > > > >> > > > netcdf-fortran-4.4.2 "configure" now worked and "make" > > worked, > > > > but > > > > > >> make > > > > > >> > > > check failed. > > > > > >> > > > Could you take a look at my make check output please? > > > > > >> > > > > > > > >> > > Here's the instructions for building netCDF-Fortran: > > > > > >> > > > > > > > >> > > > > > > > >> > > http://www.unidata.ucar.edu/netcdf/docs/building_netcdf_fortran.html > > > > > >> > > > > > > > >> > > The error you are seeing seems to indicate that the > > "netcdf.inc" > > > > > >> > > file is not being found when you run the tests. Or maybe an > > older > > > > > >> > > netcdf.inc file is being found from a previous installation, > > for > > > > > >> > > example in /usr/include/netcdf.inc. > > > > > >> > > > > > > > >> > > The fortran/netcdf.inc that comes with netcdf-fortran-4.4.2 > > has > > > > the > > > > > >> > > following statements: > > > > > >> > > > > > > > >> > > integer nf_char > > > > > >> > > ... > > > > > >> > > parameter (nf_char = 2) > > > > > >> > > > > > > > >> > > which declare a type for the nf_char parameter, so any > > > > > >> > > program that has the > > > > > >> > > > > > > > >> > > include 'netcdf.inc' > > > > > >> > > > > > > > >> > > statement and uses the right compiler directive to tell where > > to > > > > > >> > > look for the netcdf.inc include file should get the type. > > > > > >> > > > > > > > >> > > So the error you are seeing: > > > > > >> > > > > > > > >> > > make[2]: Entering directory > > > > > >> > > > > > > `/lustre05/vol0/jojchi/Projects/REEMS/netcdf-fortran-4.4.2/nf_test' > > > > > >> > > gfortran -DHAVE_CONFIG_H -I. -I.. -I../libsrc > > > > > >> > > -I/lustre05/vol0/jojchi/Projects/REEMS/mpi/include > > -I../fortran > > > > > >> > > -I../fortran -g -O2 -c -o test_get.o test_get.F > > > > > >> > > test_get.F:29.50: > > > > > >> > > > > > > > >> > > canConvert = (var_type(i) .eq. NF_CHAR) .eqv. > > > > > >> > > 1 > > > > > >> > > Error: Symbol 'nf_char' at (1) has no IMPLICIT type > > > > > >> > > test_get.F:35.34: > > > > > >> > > > > > > > >> > > means that the gfortran compiler, when running in the fortran/ > > > > > >> > > subdirectory, > > > > > >> > > isn't finding the netcdf.inc file where it's specified to be > > with > > > > > >> > > "-I../fortran". > > > > > >> > > I'm not sure why this error is occurring or how to fix it. The > > > > > >> software > > > > > >> > > compiles > > > > > >> > > fine here on our test platforms, with no errors. Check for the > > > > file > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > /lustre05/vol0/jojchi/Projects/REEMS/netcdf-fortran-4.4.2/fortran/netcdf.inc > > > > > >> > > > > > > > >> > > to make sure it exists and is readable. > > > > > >> > > > > > > > >> > > Possible solutions for the problems you aOther things you > > might > > > > try > > > > > >> that > > > > > >> > > seem > > > > > >> > > unrelated to the error you are seeing might include: > > > > > >> > > > > > > > >> > > - setting the LD_LIBRARY_PATH environment variable to point > > to > > > > > >> where the > > > > > >> > > netCDF-C library is installed > > > > > >> > > - setting environment variables F77 to mpif77 and F90 to > > mpif90 > > > > for > > > > > >> > > supporting parallel I/O from Fortran > > > > > >> > > or setting F77 and F90 to mpifort if you are using the > > ifort > > > > > >> compiler > > > > > >> > > > > > > > >> > > --Russ > > > > > >> > > > > > > address@hidden> > > > > > >> > > wrote: > > > > > >> > > > > > > > > >> > > > > It also says it cant compute sizeof (off_t). > > > > > >> > > > > It says "configure:22367" > > > > > >> > > > > Thank you. > > > > > >> > > > > > > > > > >> > > > > Regards, > > > > > >> > > > > Jae-Min > > > > > >> > > > > > > > > address@hidden > > > > > >> > > > > > > >> > > wrote: > > > > > >> > > > > > > > > > >> > > > >> Hello, > > > > > >> > > > >> > > > > > >> > > > >> I am trying to build netcdf-fortran-4.4.2, and the > > > > configuration > > > > > >> is > > > > > >> > > not > > > > > >> > > > >> working. I tried to look through the config.log and found > > > > that it > > > > > >> > > can't > > > > > >> > > > >> find libnetcdf.so.7, exit number is 77. > > > > > >> > > > >> > > > > > >> > > > >> I have attached the config.log. > > > > > >> > > > >> > > > > > >> > > > >> Thank you. > > > > > >> > > > >> > > > > > >> > > > >> Regards, > > > > > >> > > > >> Jae-Min > > > > > >> > > > >> > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > Russ Rew UCAR Unidata > > > > Program > > > > > >> > > address@hidden > > > > > >> http://www.unidata.ucar.edu > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > Ticket Details > > > > > >> > > =================== > > > > > >> > > Ticket ID: ZBH-501382 > > > > > >> > > Department: Support netCDF > > > > > >> > > Priority: Normal > > > > > >> > > Status: Closed > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > >> Russ Rew UCAR Unidata > > Program > > > > > >> address@hidden > > > > http://www.unidata.ucar.edu > > > > > >> > > > > > >> > > > > > >> > > > > > >> Ticket Details > > > > > >> =================== > > > > > >> Ticket ID: ZBH-501382 > > > > > >> Department: Support netCDF > > > > > >> Priority: Normal > > > > > >> Status: Closed > > > > > >> > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > Russ Rew UCAR Unidata Program > > > > address@hidden http://www.unidata.ucar.edu > > > > > > > > > > > > > > > > Ticket Details > > > > =================== > > > > Ticket ID: ZBH-501382 > > > > Department: Support netCDF > > > > Priority: Normal > > > > Status: Closed > > > > > > > > > > > > > > > > Russ Rew UCAR Unidata Program > > address@hidden http://www.unidata.ucar.edu > > > > > > > > Ticket Details > > =================== > > Ticket ID: ZBH-501382 > > Department: Support netCDF > > Priority: Normal > > Status: Closed > > > > > > Russ Rew UCAR Unidata Program address@hidden http://www.unidata.ucar.edu Ticket Details =================== Ticket ID: ZBH-501382 Department: Support netCDF Priority: Normal Status: Closed