[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[netCDF #FUE-968928]: Need some help for fail test, FAIL: tst_files6

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: [netCDF #FUE-968928]: Need some help for fail test, FAIL: tst_files6
  • Date: Sun, 29 Mar 2015 10:23:39 -0600
Joel, 

> I am sending the config file, now it is showing the successful installation 
> message but it seems be problems with the hdf5 library.

The config.log file you sent shows that the HDF5 library was found and worked 
fine,
with the extra library specifications you put in the LIBs environment variable

  LIBS='-lhdf5_hl -lhdf5 -lm -lz '

Apparently the HDF5 library is installed somewhere where it can be found by 
default, such 
as /usr/lib or other location listed in /etc/ld.so.conf. If your build of HYCOM 
can't find the
HDF5 libraries, check that it's using something like the LIBS above.

Otherwise, you'll have to provide more information about the specific error you 
are seeing 
and the specific compiler/linker command that caused it. If it's an error 
building HYCOM,
you may have to consult HYCOM support, as we have no knowledge about that 
software.

--Russ

> Hi Joel,
> 
> > Sorry but i'm still in problems..
> >
> > I tried the steps that you kindly send me, and it seems not be problems... 
> > but it is not shown the successful installation message and it seems not be 
> > ok. I am trying to use netcdf for HYCOM.
> 
> Could you please send us the config.log file that resulted from rerunning
> the configure script using the "--disable-dap-remote-tests" option?
> 
> Thanks.
> 
> --Russ
> > ________________________________________
> > De: Unidata netCDF Support <address@hidden>
> > Enviado: viernes, 6 de febrero de 2015 04:10 p. m.
> > Para: Joel Sánchez Mondragón
> > Cc: address@hidden
> > Asunto: [netCDF #FUE-968928]: Need some help for fail test, FAIL: tst_files6
> >
> > Hello,
> >
> > This is a known issue related to a change in our test server
> > configuration. The 4.3.2 release fixed it by pointing directly
> > to our new test servers. So, the failure is on our end, not
> > yours.
> >
> > You can complete testing and installation of earlier releases
> > the netCDF C library and utilities by following these steps:
> >
> > 1. Run "make clean" in the top level directory of your source netCDF
> > source (or unpack the source again in a new source directory)
> >
> > 2. Run the "configure" script again, but this time add the following
> > option to whatever options you previously specified:
> >
> > --disable-dap-remote-tests
> >
> > 3. Run "make check" and verify that it now completes successfully.
> >
> > 4. Run "make install", or "sudo make install" if needed.
> >
> > That should get you past the problem with our test server and allow
> > the installation to complete successfully.  Please let us know if you
> > encounter additional errors.
> >
> > -Ward
> >
> > > Hi
> > >
> > > My name is Joel and I try to install netCDF in a workstation with centos 7
> > > and intel Xeon processor, please help me with this error
> > >
> > > Regrets
> > > Joel
> > >
> > >
> > > *** Testing netcdf file functions some more.
> > > *** testing simple opendap open/close...Sorry! Unexpected result, 
> > > tst_files6.c, line: 25
> > > FAIL: tst_files6
> > >
> > > *** Testing netcdf-4 variable syncing.
> > > **** testing that sync works in netCDF-4...ok.
> > > **** testing that sync works in netCDF-4, with test contributed by Jeff 
> > > W....ok.
> > > **** testing that sync works in netCDF-4, with test contributed by Jeff 
> > > W....ok.
> > > *** Tests successful!
> > > PASS: tst_sync
> > >
> > > *** Testing netcdf-4 v2 API functions.
> > > *** testing simple opens and creates...ok.
> > > *** Tests successful!
> > > PASS: tst_v2
> > > ================================================
> > > 1 of 50 tests failed
> > > Please report to address@hidden
> > > ================================================
> > > make[2]: *** [check-TESTS] Error 1
> > > make[2]: se sale del directorio 
> > > `/home/conacyt2/Descargas/netcdf-4.2/nc_test4'
> > > make[1]: *** [check-am] Error 2
> > > make[1]: se sale del directorio 
> > > `/home/conacyt2/Descargas/netcdf-4.2/nc_test4'
> > > make: *** [check-recursive] Error 1
> > >
> > >
> > >
> >
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: FUE-968928
> > Department: Support netCDF
> > Priority: Normal
> > Status: Closed
> >
> >
> >
> Russ Rew                                         UCAR Unidata Program
> address@hidden                      http://www.unidata.ucar.edu
> 
> 
> 
> Ticket Details
> ===================
> Ticket ID: FUE-968928
> Department: Support netCDF
> Priority: Normal
> Status: Closed
> 
> 
> 
Russ Rew                                         UCAR Unidata Program
address@hidden                      http://www.unidata.ucar.edu



Ticket Details
===================
Ticket ID: FUE-968928
Department: Support netCDF
Priority: Normal
Status: Closed