[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[netCDF #CBA-908124]: NetCDF Fortran

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: [netCDF #CBA-908124]: NetCDF Fortran
  • Date: Thu, 31 Jan 2013 09:05:36 -0700
> O.K.  I've tried it both ways, configuring with Ed and with the default
> '/usr/local'  in the directory 'netcdf-4.2.1'.  Everything checks out
> and I get the same result (with default directories, now) as before.
> That is, no f90 libraries and 'nf-config' is not in the '/usr/local/bin'
> directory.   After installing NetCDF-4.2 in this way and assuming the
> next step was to install the Fortran libraries I did ./configure, make
> check install in the directory 'netcdf-fortran-4.2' and get

When you ran ./configure for the Fortran libraries, you must provide the 
necessary CPPFLAGS and LDFLAGS (and possibly LD_LIBRARY_PATH) environment 
variables telling where the netCDF C library was installed, as described
here:

  http://www.unidata.ucar.edu/netcdf/docs/netcdf-fortran-install.html

From the output below, it appears that information wasn't provided to
the netCDF Fortran configure script ...

--Russ

> [root@c-67-170-3-124 netcdf-fortran-4.2]# make check
> Making check in f90
> make[1]: Entering directory `/home/jry/netcdf-fortran-4.2/f90'
> make  check-am
> make[2]: Entering directory `/home/jry/netcdf-fortran-4.2/f90'
> make[2]: Nothing to be done for `check-am'.
> make[2]: Leaving directory `/home/jry/netcdf-fortran-4.2/f90'
> make[1]: Leaving directory `/home/jry/netcdf-fortran-4.2/f90'
> Making check in fortran
> make[1]: Entering directory `/home/jry/netcdf-fortran-4.2/fortran'
> make  check-am
> make[2]: Entering directory `/home/jry/netcdf-fortran-4.2/fortran'
> depbase=`echo fort-v2compat.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> /bin/sh ../libtool --tag=CC   --mode=compile gcc
> -DHAVE_CONFIG_H -I. -I..  -DDLL_EXPORT    -g -O2 -MT fort-v2compat.lo
> -MD -MP -MF $depbase.Tpo -c -o fort-v2compat.lo fort-v2compat.c &&\
> mv -f $depbase.Tpo $depbase.Plo
> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -DDLL_EXPORT -g -O2 -MT
> fort-v2compat.lo -MD -MP -MF .deps/fort-v2compat.Tpo -c fort-v2compat.c
> -fPIC -DPIC -o .libs/fort-v2compat.o
> fort-v2compat.c: In function 'c_ncopn':
> fort-v2compat.c:274: error: 'NC_CLASSIC_MODEL' undeclared (first use in
> this function)
> fort-v2compat.c:274: error: (Each undeclared identifier is reported only
> once
> fort-v2compat.c:274: error: for each function it appears in.)
> make[2]: *** [fort-v2compat.lo] Error 1
> make[2]: Leaving directory `/home/jry/netcdf-fortran-4.2/fortran'
> make[1]: *** [check] Error 2
> make[1]: Leaving directory `/home/jry/netcdf-fortran-4.2/fortran'
> make: *** [check-recursive] Error 1
> [root@c-67-170-3-124 netcdf-fortran-4.2]# make install
> Making install in f90
> make[1]: Entering directory `/home/jry/netcdf-fortran-4.2/f90'
> make  install-am
> make[2]: Entering directory `/home/jry/netcdf-fortran-4.2/f90'
> make[3]: Entering directory `/home/jry/netcdf-fortran-4.2/f90'
> make[3]: Nothing to be done for `install-exec-am'.
> test -z "/home/ed/local/share/man/man3" || /bin/mkdir -p
> "/home/ed/local/share/man/man3"
> /usr/bin/install -c -m 644 netcdf_f90.3 '/home/ed/local/share/man/man3'
> test -z "/home/ed/local/include" || /bin/mkdir -p "/home/ed/local/include"
> /usr/bin/install -c -m 644 typesizes.mod netcdf.mod
> '/home/ed/local/include'
> make[3]: Leaving directory `/home/jry/netcdf-fortran-4.2/f90'
> make[2]: Leaving directory `/home/jry/netcdf-fortran-4.2/f90'
> make[1]: Leaving directory `/home/jry/netcdf-fortran-4.2/f90'
> Making install in fortran
> make[1]: Entering directory `/home/jry/netcdf-fortran-4.2/fortran'
> make  install-am
> make[2]: Entering directory `/home/jry/netcdf-fortran-4.2/fortran'
> depbase=`echo fort-v2compat.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> /bin/sh ../libtool --tag=CC   --mode=compile gcc
> -DHAVE_CONFIG_H -I. -I..  -DDLL_EXPORT    -g -O2 -MT fort-v2compat.lo
> -MD -MP -MF $depbase.Tpo -c -o fort-v2compat.lo fort-v2compat.c &&\
> mv -f $depbase.Tpo $depbase.Plo
> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -DDLL_EXPORT -g -O2 -MT
> fort-v2compat.lo -MD -MP -MF .deps/fort-v2compat.Tpo -c fort-v2compat.c
> -fPIC -DPIC -o .libs/fort-v2compat.o
> fort-v2compat.c: In function 'c_ncopn':
> fort-v2compat.c:274: error: 'NC_CLASSIC_MODEL' undeclared (first use in
> this function)
> fort-v2compat.c:274: error: (Each undeclared identifier is reported only
> once
> fort-v2compat.c:274: error: for each function it appears in.)
> make[2]: *** [fort-v2compat.lo] Error 1
> make[2]: Leaving directory `/home/jry/netcdf-fortran-4.2/fortran'
> make[1]: *** [install] Error 2
> make[1]: Leaving directory `/home/jry/netcdf-fortran-4.2/fortran'
> make: *** [install-recursive] Error 1
> .
> Should I, in fact, be using the code in this directory
> (/home/jyr/netcdf-fortran-4.2/) to create the Fortran libraries or
> should they have been created when I did the install in
> /home/jry/netcdf-4.2.1.
> 
> 
> Thanks for your patience on this,
> 
> John Yearsley
> 
> 
Russ Rew                                         UCAR Unidata Program
address@hidden                      http://www.unidata.ucar.edu



Ticket Details
===================
Ticket ID: CBA-908124
Department: Support netCDF
Priority: Normal
Status: Closed