[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 20040329: Hi Tom, S400 is up just now.
- Subject: Re: 20040329: Hi Tom, S400 is up just now.
- Date: Mon, 29 Mar 2004 18:45:49 -0500
Hi Tom,
I did run the scour routine yesterday noon and once this morning. I
ran this scour routine from a remote system. On the server we were
trying to view GOESEAST , GOESWEST data thro the MCIdas. This were
the ones that we were not able to view. This is when the server
stopped functioning and probably, the scour routine was not
completed then.
The MC-Idas Problem:
When we select the goes east data, and click display, then all that
we see is the black screen on the image display region, but no
image. Could it be any other setting ( some display properties )
that needs to be changed?
In the mail that i had sent you yesterday, i also needed help on
displaying the Lightning data on the IDV.
--
Sincerely ,
Karthik Samudram Jayaraman
Quoting Unidata Support <address@hidden>:
> >From: Karthik Samudram Jayaraman <address@hidden>
> >Organization: Western Michigan
> >Keywords: 200403291856.i2TIuPrV022900
>
> Karthik,
>
> >The s400 system came up just now with the help of our system
> >administrator.
>
> I logged on and see that /cutrim1 is full:
>
> /dev/dsk/c1t1d0s2 35009161 34659070 0 100% /cutrim1
> /dev/dsk/c1t2d0s2 35009161 14473807 20185263 42% /cutrim2
>
>
> This is undoubtedly the cause of no new data being decoded by
> the McIDAS-XCD decoders.
>
> I just ran the McIDAS scouring routine by had as the user 'ldm'
> to see if that would help clean things up:
>
> <as 'ldm'>
> crontab -l <- to get the cron job listing
>
> ldm@s400 /cutrim1> /cutrim1/ldm/util/mcscour.sh
>
> Now, there is some space for decoding to proceed:
>
> ldm@s400 /cutrim1> df -k
> Filesystem 1k-blocks Used Available Use% Mounted on
> ...
> /dev/dsk/c1t1d0s2 35009161 30515867 4143203 89% /cutrim1
> /dev/dsk/c1t2d0s2 35009161 14927616 19731454 44% /cutrim2
>
> I also logged on as the user 'mcidas', and looked to see if POINT
> data
> is avaliable through ADDE. It is:
>
> <as 'mcidas'>
> cd ~mcidas/workdata
>
> ~/workdata> sfclist.k KDEN 24
> Day Time StCo Stn T Td Dir Spd Gus AltSet Vis Weather
> Ceil
> hhmm id [F] [F] [ kts ] [mb] [mi]
> ---- ---- ---- ----- --- --- --- --- --- ------ ----- --------
> -----
> 28 1953 COUS KDEN 36 28 340 24 1024.7 4.00 S-F
> 5/015
> S 28 2024 COUS KDEN 37 30 330 16 25 1025.4 7.00 S-
> 5/017
> S 28 2040 COUS KDEN 36 27 330 17 23 1025.4 2.50 S-F
> 5/012
> 28 2053 COUS KDEN 36 28 330 17 1025.7 1.50 S-F
> 8/015
> S 28 2127 COUS KDEN 282 118 6.00 W
> 5/020
> S 28 2131 COUS KDEN 36 27 210 4 1025.1 10.00
> 5/036
> 28 2200 COUS KDEN 37 82
> 28 2300 COUS KDEN 000 44
> S 28 2332 COUS KDEN 290 24 6.00 W
> 5/080
> 29 0053 COUS KDEN 41 17 020 8 1025.1 10.00
> 29 0153 COUS KDEN 34 18 110 5 1025.4 10.00
> 29 0300 COUS KDEN 37 84
> 29 0400 COUS KDEN 37 84
> 29 0453 COUS KDEN 32 18 170 11 1025.1 10.00
> S 29 0539 COUS KDEN 290 6.00
> 29 0553 COUS KDEN 30 20 170 10 1025.4 10.00
> 29 0700 COUS KDEN 82 37 BD
> 29 0753 COUS KDEN 29 18 240 8 1025.7 10.00
> 29 0853 COUS KDEN 28 19 270 7 1026.4 10.00
> 29 1000 COUS KDEN 37 84
> 29 1100 COUS KDEN 000 76
> S 29 1121 COUS KDEN 291 212 6.00
> 29 1153 COUS KDEN 26 19 220 6 1026.4 10.00
> 29 1253 COUS KDEN 28 19 210 6 1026.4 10.00
> 29 1353 COUS KDEN 35 18 250 8 1026.4 10.00
> Number of reports = 25
> sfclist.k: done
>
>
> Also, I looked at current synoptic surface data from Brazil:
>
> sfclist.k X 18 DAT=RTPTSRC/SYNOPTIC CO=BR
>
> Day Time StCo Stn T Td Dir Spd Gus AltSet Vis Weather
> Ceil
> hhmm id [F] [F] [ kts ] [mb] [mi]
> ---- ---- ---- ----- --- --- --- --- --- ------ ----- --------
> -----
> 29 0300 BR 82022 76 73 250 4 1011.0 4.97 TRW
> 29 0300 BR 82193
> 29 0300 BR 82281 77 75 060 5 1010.2 12.43
> 29 0300 BR 82332 78 76 000 0 1011.3 12.43
> 29 0300 BR 82398 83 74 070 7 1010.8 12.43
> 29 0300 BR 82400
> 29 0300 BR 82460 126 113 27.96
> 29 0300 BR 82480 35 1020.5 2.67
> 29 0300 BR 82579 78 77 350 4 1011.8 12.43
> 29 0300 BR 82599 80 74 210 6 1012.1 12.43
> ...
> 29 1800 BR 83650 34 34 000 41 1.86
> 29 1800 BR 83704 93 53 320 8 1008.5 12.43
> 29 1800 BR 83716 88 63 140 3 1011.3 6.21
> 29 1800 BR 83821 79 73 090 6 1014.7 12.43
> 29 1800 BR 83980 141 78 34.18
> 29 1800 BR 89263 26 200 24 992.6 0.00
> Number of reports = 272
> sfclist.k: done
>
>
> So, back to your original email in which you said:
>
> This morning we were trying to view the conditions in brazil
> using
> mcidas. We are able to view only the Realtime Data Images. None
> of
> the other data is loading. Is it because we don't have the other
>
> data comming in?
>
> What "other data" were you trying to look at that didn't work?
>
> OK.
>
> >Sincerely ,
> >Karthik Samudram Jayaraman
>
> Tom
> --
>
*********************************************************************
*******
> <
> Unidata User Support UCAR
> Unidata Program <
> (303)497-8643 P.O.
> Box 3000 <
> address@hidden Boulder,
> CO 80307 <
> -------------------------------------------------------------------
---------
> <
> Unidata WWW Service
> http://my.unidata.ucar.edu/content/support <
> -------------------------------------------------------------------
---------
> <
> NOTE: All email exchanges with Unidata User Support are recorded in
> the
> Unidata inquiry tracking system and then made publically available
> through the web. If you do not want to have your interactions
> made
> available in this way, you must let us know in each email you send
> to us.
>