[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Support #JHE-806526]: Old LDM version question.

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: [Support #JHE-806526]: Old LDM version question.
  • Date: Thu, 24 May 2007 10:27:06 -0600
Stonie,

> We have an old box, for legacy reasons, that is still running 6.3.0.
> We recently rebooted the box, and when it came back up, LDM would not
> come up.
> 
> This same system had been running flawless for about two years.  Yes,
> I know a person normally reboots more often, but . . . .
> 
> Anyway, the logs are filled with the following snipet.  I have never
> seen this before (and it's not in the logs prior to the reboot) - so
> I'm wondering if you have any ideas.  It isn't to say that some file
> didn't get changed over the course of two years . . . we did try:
> 
> ldmadmin stop
> 
> ldmadmin delqueue
> 
> ldmadmin mkqueue
> 
> ldmadmin start
> 
> Here is what the logs say - any ideas?:
> 
> May 22 20:00:44 noaaportr ldmping[21924]: SVC_UNAVAIL   0.000788
> 0   localhost    RPC: Program not registered
> May 22 20:00:44 noaaportr pqcheck[21928]: Starting Up (21702)
> May 22 20:00:44 noaaportr pqcheck[21928]: The writer-counter of the
> product-queue is 0
> May 22 20:00:44 noaaportr pqcheck[21928]: Exiting
> May 22 20:01:05 noaaportr ldmping[22122]: SVC_UNAVAIL   0.000649
> 0   localhost    RPC: Program not registered
> May 22 20:01:05 noaaportr pqcheck[22126]: Starting Up (22014)
> May 22 20:01:05 noaaportr pqcheck[22126]: The writer-counter of the
> product-queue is 0
> May 22 20:01:05 noaaportr pqcheck[22126]: Exiting
> May 22 20:04:17 noaaportr ldmping[7950]: SVC_UNAVAIL   0.000575
> 0   localhost    RPC: Program not registered
> May 22 20:04:17 noaaportr pqcheck[7954]: Starting Up (6324)
> May 22 20:04:17 noaaportr pqcheck[7954]: The writer-counter of the
> product-queue is 0
> May 22 20:04:17 noaaportr pqcheck[7954]: Exiting
> May 22 20:06:33 noaaportr ldmping[8490]: SVC_UNAVAIL   0.000570
> 0   localhost    RPC: Program not registered
> May 22 20:06:44 noaaportr ldmping[8496]: SVC_UNAVAIL   0.000569
> 0   localhost    RPC: Program not registered
> May 22 20:12:42 noaaportr ldmping[8571]: SVC_UNAVAIL   0.000573
> 0   localhost    RPC: Program not registered
> May 22 20:12:52 noaaportr ldmping[8579]: SVC_UNAVAIL   0.000554
> 0   localhost    RPC: Program not registered
> May 22 20:13:03 noaaportr ldmping[8594]: SVC_UNAVAIL   0.000659
> 0   localhost    RPC: Program not registered
> May 22 20:13:05 noaaportr pqcheck[8598]: Starting Up (8589)
> May 22 20:13:05 noaaportr pqcheck[8598]: The writer-counter of the
> product-queue is 0
> May 22 20:13:05 noaaportr pqcheck[8598]: Exiting
> May 22 20:13:18 noaaportr ldmping[8607]: SVC_UNAVAIL   0.000562
> 0   localhost    RPC: Program not registered
> May 22 20:19:18 noaaportr ldmping[8670]: SVC_UNAVAIL   0.000549
> 0   localhost    RPC: Program not registered
> May 22 20:19:18 noaaportr pqcheck[8674]: Starting Up (8665)
> May 22 20:19:18 noaaportr pqcheck[8674]: The writer-counter of the
> product-queue is 0
> May 22 20:19:18 noaaportr pqcheck[8674]: Exiting
> May 22 20:19:54 noaaportr ldmping[8688]: SVC_UNAVAIL   0.000571
> 0   localhost    RPC: Program not registered

The "ldmadmin start" command is checking to see if the LDM
started and deciding that it didn't.  If there are no relevant
error messages in the LDM log file, then I suggest executing the
LDM server manually and using the option "-vl-" to have log
messages written to the standard error stream in verbose mode.

Regards,
Steve Emmerson

Ticket Details
===================
Ticket ID: JHE-806526
Department: Support LDM
Priority: Normal
Status: Closed