20030312: incomplete logging in ldmd.log

>From: "Neil R. Smith" <address@hidden>
>Organization: TAMU
>Keywords: 200303130136.h2D1aoB2022568 LdM FreeBSD

Hi Neil,

>--
>FreeBSD 4.7
>LDM-5.2.2
>--
>I'm having diffuculty getting complete logging to my ldmd.log. All I get 
>currently is the following on startup:
>===
>Mar 12 18:00:21 weather ldm: LDM Start (login name, tty, login time, [from]): 
>ldm              ttyp4    Mar 12 18:00
>=== (word wrapped)
>I expected to also get the logging of interactions upstream servers.
>So far I've done the test:
>   logger -p local0.debug "Test of syslogd output to LDM log file"
>and the text string appears in the log file. I haven't configure the 
>pqact.conf yet .. just using the default from the distribution; the ldm is 
>indeed decoding from those pqact.conf entries. 'ldmadmin watch' shows the 
>data streaming in. The log files of the upstream hosts are logging the 
>successfull requests from this ldm.
>Have you seen this before? What should I check?

Actually, what I suggest is that you upgrade to LDM-6 release candidate
LDM-6.0.2, (its availability has not been announced to the community
but it will soon).

We have been running LDM-6 on FreeBSD 4.7 for a couple of months now
and severe stress tests for the past couple of days, and the
performance has been extremely good.  Unlike LDM-5, LDM-6 is fully
compatible with FreeBSD: it builds out of the box and runs like a
champ.

Here is the info I have been sending to toplevel IDD relay sites
regarding LDM-6:

Notes:

- The online documentation for LDM is still that for LDM-5.  We
  (Steve Emmerson) are working on upgrading it for the general release.

LDM 6 offers a number of new ideas that we are excited about.  Here's
an overview:

o request lines to the same host in ldmd.conf are no longer accumulated
  into a single rpc.ldmd invocation.  This allows a user to split feeds
  without having to create machine name aliases in /etc/hosts.

o the size of the HEREIS - COMINGSOON "fence" is now user configurable.
  In LDM-5, all products smaller than 16384 bytes would be sent using
  the HEREIS protocol.  In LDM-6, this "fence" is settable on a
  per-request line basis.  The default for the "fence" size is now
  essentially infinity (actually, it is size of a uint).  You specify
  the "fence" size as the 4th parameter on an ldmd.conf request line.
  LDM-6 understands a couple of mnemonics for minimim and maximum
  "fence" sizes:

request IDS|DDPLUS ".*" my.upstream.site PRIMARY    (or PRI)
request IDS|DDPLUS ".*" my.upstream.site ALTERNATE  (or ALT)

or equivalently:

request IDS|DDPLUS ".*" my.upstream.site MAXIMIM    (or MAX)
request IDS|DDPLUS ".*" my.upstream.site MINIMUM    (or MIN)

  We think that the PRI (uint_max) and ALT (zero) values are basically
  all that a site will ever need/use, but the values are configurable
  nonetheless.

o products sent with the COMINGSOON/BLKDATA protocol are sent in one
  chunk after a transaction is made between the client and server in
  which the client says that it wants the product.  In LDM-5, the same
  client/server transaction was made and then the product was sent in
  16384 BLKDATA chunks.

o LDM-6 is backward/forward compatible with LDM-5.  LDM-5 clients
  can receive data from LDM-6 servers, and LDM-6 clients can receive
  data from LDM-5 servers.  When LDM-5 talks to LDM-6, it does so using
  LDM-5 protocols.  LDM-6 running LDM-5 protocols is more efficient
  than LDM-5.

o LDM-6 can use the same product queue that LDM-5 uses.  This allows
  a site to install the new version and start running without remaking
  the product queue.

o LDM-6 is much more capable of delivering data to electronically
  remote sites.  One site we have been using for testing is located on
  the edge of the Amazon in Belem, Brazil.

o LDM-6's ldmadmin now does several things for you that you had
  to do by hand in LDM-5:

  o put you in the ~ldm directory at LDM startup
  o create the ~ldm/logs/ldmd.log file if it does not already exist
  o determine your machine's hostname using a 'uname -n'.  If
    this does not result in a fully qualified hostname, ldmadmin
    will complain and not start the LDM.  In this case, you
    need to edit ldmadmin and set the hostname:

change:

chop($hostname = `uname -n`);
# $hostname = "your.hostname.here";

to:

# chop($hostname = `uname -n`);
$hostname = "yourown.hostname.edu";

o LDM-6's ldmadmin now waits until the rpc.ldmd processes have all
  exited before returning you to the Unix command prompt

o LDM-6 now understands CONDUIT and CRAFT as the NMC2 and NEXRD2
  streams.

o Some early tests using synthesized data showed that LDM-6 was capable
  of moving 8.4 times more data than LDM-5.  The increase in "efficiency"
  using real data has, however, not yet been quantified, but qualitatively
  we can assure that the increase in "efficiency" is real.  For reference,
  the early tests that showed the 8.4 times increase was conducted between
  a machine here at the UPC, and a Linux PC running at the Universidade
  Federal do Para in Belem, Brazil using synthetic products that were
  each 200KB in size.  Also, during the test, the client LDM did not
  write into a product queue.

N.B. (nota bene/yo):

During stress testing of the LDM-6, we learned that there is a class of
"pathological" regular expressions that adversly affect the performance
of LDM servers.  Steve sent a note to ldm-users explaining how to
identify pathological cases, and what to do to correct these.
Unfortunately, it is the client requesting data that has control over
these regular expressions, so if you find these in your ldmd.log files,
you will need to contact the downstream host's administrator and ask
him/her to correct the pattern.  Steve has included a new function in
LDM-6, regex, that can be used to test regular expressions for
pathologicalness ;-).  Check the regex man page for more information
after you install LDM-6.

To upgrade to LDM-6, then you should do the following:

1) make backup copies of your ~ldm/etc/ldmd.conf file(s).  While
   you are at it, you could make a backup copy of your ~ldm/etc/pqact.conf
   file, but this is optional since it will not be affected by moving
   to LDM-6.

2) FTP LDM-6 release candidate 6.0.2:

<login as 'ldm'>
cd ~ldm
ftp ftp.unidata.ucar.edu
  <user> anonymous
  <pass> your_full_email_address
  cd pub/ldm/test
  binary
  get ldm-6.0.2.tar.Z
  quit
zcat ldm-6.0.2.tar.Z | tar xvf -

3) build LDM-6. Note that LDM-6 is built with '-O' optimization
   turned on.  If you want to build otherwise, you will want to set
   the Unix environment variable CFLAGS _before_ you run configure.

   Also, you should define the Unix environment variable LDMHOME
   _before_ you run configure:

setenv LDMHOME your_ldm_home_directory

cd ~ldm/ldm-6.0.2/src
./configure
make && make install

4) finish the LDM install as 'root':

sudo make install_setuids

5) adjust entries in ldmadmin to match those from your existing
   ldmadin.  This should boil down to you changing the product queue
   size; the number of log files that you want to keep online (we keep
   14 on our IDD machines); uncommenting out the entry for udunits if
   you are running things like gribtonc; filling in your full hostname
   if a 'uname -n' does not return a fully qualified hostname; etc.

6) shutdown your current LDM waiting for all LDM processes to exit.
   This step is easier in LDM-6 since ldmadmin won't return you to
   the Unix/Linux prompt before processes have exited.

7) add the execution of the real time statistics routine, rtstats
   to your ~ldm/etc/ldmd.conf file:

add:

exec    "rtstats -h rtstats.unidata.ucar.edu"

   somewhere in the list of 'exec's at the top of ldmd.conf

8) change the runtime link to point at ldm-6.0

cd ~ldm
rm runtime && ln -s ldm-6.0.2 runtime

9) verify that your operating system has finished flushing the LDM
   queue from memory to disk.  I found that this was an important
   step in getting things to work smoothly on thelma.  I did
   the verification by watching the iostat listing of top.  As soon
   as it quites down, you are ready to go.  Our experience is that
   the larger the queue, the longer this step takes.  We even added
   a 'sync' call from ldmadmin to tell the OS to sync to disk before
   shutting down LDM processes.

10) start LDM-6:

rehash                <- C shell only
ldmadmin start

I think I have covered all bases in this note, but you never know.

After your LDM-6 is up and running, and you are reporting real time
statistics, you can review latencies, datastream volumes, datastream
product numbers, and topology at:

http://www.unidata.ucar.edu/staff/chiz/rtstats

This web page will likely change in the future, but it is very useful
right now.

If you would help doing the upgrade or have any questions, just let us know.

Tom Yoksas