[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 20020702: HU - upper air data

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: RE: 20020702: HU - upper air data
  • Date: Fri, 19 Jul 2002 14:18:14 -0600 (MDT)
Hi Pavel, 

If you "see" the data doing a notifyme, you can get the data.

Please send me a snip of your ldmd.conf file so I can see your request(s)
to atm..

Thank you,


-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
NWS-COMET Case Study Library                  FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Fri, 19 Jul 2002, Pavel Byles-Howard University Engineering wrote:

> ok Jeff.
> I fixed the pqact.conf file and now when I do notifyme .... it shows the 
> HDS etc... instead of just nexrad.
> but I don't seem to be recieving any data other than nnexrad data
> 
> Pavel Byles
> 
> On Fri, 19 Jul 2002, Jeff Weber wrote:
> 
> > Hi Pavel, 
> > 
> > pqact.conf does not enjoy "spaces". You must use the tab key to delimit
> > your fields..so do not use the space bar, and cutting and pasting may lead
> > to these errors as well, especially if it line wraps.
> > 
> > As to your first question re the notifyme to atm..did you stop and restart
> > the ldm after making the changes to your ldmd.conf?
> > 
> > Let me know...and I'll poke around in atm's logs.
> > 
> > Thanks,
> > 
> > -Jeff
> > ____________________________                  _____________________
> > Jeff Weber                                    address@hidden
> > Unidata Support                               PH:303-497-8676 
> > NWS-COMET Case Study Library                  FX:303-497-8690
> > University Corp for Atmospheric Research      3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > ________________________________________      ______________________
> > 
> > On Fri, 19 Jul 2002, Pavel Byles-Howard University Engineering wrote:
> > 
> > > pqact check gives errors:
> > > ldm% ldmadmin pqactcheck
> > > /space/home/ldm/etc/pqact.conf has errors in entry(s), remove leading 
> > > spaces:
> > > line 87:         PIPE    decoders/dcuair -b 24 -m 16
> > > line 88:         -d data/pub/decoded/gempak/logs/dcuair.log
> > > line 89:         -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > > line 90:         -s snstns.tbl
> > > line 91:         data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > > Jul 19 13:34:20 UTC zephyr.atmphys.howard.edu :
> > > ldm%
> > > 
> > > I am not sure what leading spaces are though.
> > > 
> > > Pavel Byles
> > > 
> > > On Wed, 17 Jul 2002, Jeff Weber wrote:
> > > 
> > > > Pavel, 
> > > > 
> > > > Did you stop and re-start the LDM after the changes...
> > > > 
> > > > What does a notifyme -vl - -h atm.geo.nsf.gov return?
> > > > 
> > > > All else looks good, do not forget it must be tab delimited in 
> > > > pqact.conf,
> > > > and you may want to try running:
> > > > 
> > > > ldmadmin pqactcheck 
> > > > 
> > > > (from command line as ldm)
> > > > 
> > > > to check for syntax errors in your pqact.conf file
> > > > 
> > > > Let me know..
> > > > 
> > > > -Jeff
> > > > ____________________________                  _____________________
> > > > Jeff Weber                                    address@hidden
> > > > Unidata Support                               PH:303-497-8676 
> > > > NWS-COMET Case Study Library                  FX:303-497-8690
> > > > University Corp for Atmospheric Research      3300 Mitchell Ln
> > > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > > > ________________________________________      ______________________
> > > > 
> > > > On Wed, 17 Jul 2002, Pavel Byles-Howard University Engineering wrote:
> > > > 
> > > > > Jeff.
> > > > > For some reason I am not recieving any data. I don't know why. I just 
> > > > > added so that the 2 lines in my ldmd.conf says:
> > > > > 
> > > > > request NNEXRAD "/p...(LWX|DOX|AKQ)" atm.geo.nsf.gov
> > > > > request UNIDATA ".*" atm.geo.nsf.gov
> > > > > 
> > > > > And I added the lines to the pqact.conf
> > > > > 
> > > > > NNEXRAD ^SDUS[2357]. .... 
> > > > > ([0-3][0-9])([0-2][0-9])([0-6][0-9]).*/p(...)(...)
> > > > >         FILE    -close
> > > > >         data/gempak/nexrad/NIDS/\5/\4/\4_(\1:yyyy)(\1:mm)\1_\2\3
> > > > > ##      
> > > > > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> > > > >          PIPE    decoders/dcuair -b 24 -m 16
> > > > >          -d data/pub/decoded/gempak/logs/dcuair.log
> > > > >          -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > > > >          -s snstns.tbl
> > > > >          data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > > > > 
> > > > > Can you see a problem?
> > > > > Thanks
> > > > > 
> > > > > -- 
> > > > > Pavel Byles
> > > > > Sent using Pine ver. 4.4
> > > > > on RedHat Linux 7.3
> > > > > http://138.238.177.230
> > > > > 
> > > > > 
> > > > 
> > > 
> > > -- 
> > > Pavel Byles
> > > Sent using Pine ver. 4.4
> > > on RedHat Linux 7.3
> > > http://138.238.177.230
> > > 
> > > 
> > 
> 
> -- 
> Pavel Byles
> Sent using Pine ver. 4.4
> on RedHat Linux 7.3
> http://138.238.177.230
> 
>