[IDV #SLG-471030]: Repeat Elevation Angles Remote Level II Radar Data

> Good Morning:
> 
> Looking at PAH remote Level II data for this AM (see jpeg file). Displayed 
> Base Reflectivity 0.5 degree elevation data. Left side first 0.5 degree 
> elevation angle in field selector window for Reflectivity and right side 
> second 0.5 degree elevation angle in field selector window for Reflectivity. 
> More echo is showing in the first image. Not sure why different displays for 
> the same elevation angle. The 2 instances of the 0.5 degree (also the 1.5 
> degrees) elevation angle do not show up in the Radial Velocity and Spectrum 
> Width field selector window.
> 
> Current VCP for PAH was 21 ... From ...
> 
> http://www.roc.noaa.gov/ops/vcp.asp
> 
> 
> Any help on this is appreciated.
> 
> 
> Greg ...
> 
Greg,
       There are many formal explanation of the radar VCPs, you can browse on 
the web to get the detail information. I can only give a brief summary here. 
First, the VCP for each radar station  is changed according to the weather 
condition. If the VCP for radar site PAH is 21, which means the precipitation 
mode. For some parameters at some levels, a radar may run more than one sweep 
according to the weather condition, such as two full sweeps at 0.5 for the 
reflectivity and only one sweep for the doppler velocity, and may even collect 
both parameters in the same sweep. And because of the difference in the time of 
each sweep, the signal in the same elevation can be difference. The design of 
each VCP is based on the requirements of meteorologist to analyze the structure 
of the weather system.


Yuan
> 
> 
> -----Original Message-----
> From: Unidata IDV Support [mailto:address@hidden]
> Sent: Thursday, June 19, 2008 5:34 PM
> To: Salottolo Greg
> Cc: address@hidden
> Subject: [IDV #SLG-471030]: Repeat Elevation Angles Remote Level II
> Radar Data
> 
> 
> >
> >
> > >  -----Original Message-----
> > > From:     Salottolo Greg
> > > Sent:     Thursday, June 19, 2008 4:06 PM
> > > To:       'Unidata IDV Support'
> > > Subject:  Repeat Elevation Angles Remote Level II Radar Data
> > >
> > > Good Afternoon:
> > >
> > > Using remote level II chooser getting repeat level II elevation angles 
> > > (see image). 2.5 vista ..
> > >
> > > New VCP Coverage Patterns 211, 212, 221 ...?
> 
> Scalottolo,
> This is VCP 212. And it is super resolution Nexrad data file.
> 
> > >
> > > By the way the Cursor Readout Window is very useful with radar data.
> > >
> > > Thanks ...
> > >
> > > Greg ...
> > >
> > >
> > > >  <<level2_repeat_ele_ang.jpg>>
> > >
> > Also getting this error ...
> 
> Well, another new format, AR2V0004, believe it or not, it is new to me too. I 
> just found out yesterday that this new format is coming and today it is 
> actually in our distributing system IDD. I will need to make some changes to 
> this new format.
> 
> Yuan
> >
> > > >  <<level2.jpg>>
> >
> >
> >
> >
> > >  -----Original Message-----
> > > From:     Salottolo Greg
> > > Sent:     Thursday, June 19, 2008 4:06 PM
> > > To:       'Unidata IDV Support'
> > > Subject:  Repeat Elevation Angles Remote Level II Radar Data
> > >
> > > Good Afternoon:
> > >
> > > Using remote level II chooser getting repeat level II elevation angles 
> > > (see image). 2.5 vista ..
> > >
> > > New VCP Coverage Patterns 211, 212, 221 ...?
> > >
> > > By the way the Cursor Readout Window is very useful with radar data.
> > >
> > > Thanks ...
> > >
> > > Greg ...
> > >
> > >
> > > >  <<level2_repeat_ele_ang.jpg>>
> > >
> > Also getting this error ...
> >
> > > >  <<level2.jpg>>
> >
> >
> 
> 
> Ticket Details
> ===================
> Ticket ID: SLG-471030
> Department: Support IDV
> Priority: Normal
> Status: Open
> 
> 


Ticket Details
===================
Ticket ID: SLG-471030
Department: Support IDV
Priority: Normal
Status: Open