This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.
Chiz, With the verbose output, I get messages like the following in the dcacars.log file ^@Nov 05 16:33:25 dcacars[6477]: Starting up ^@ creating temporary netcdf file .tmp_netcdf.qoxpGk look gempak/acars/.tmp_netcdf.qoxpGk now will input netcdf from gempak/acars/.tmp_netcdf.qoxpGk Nov 05 16:33:25 dcacars[6477]: Could not open gempak/acars/.tmp_netcdf.qoxpGk ^@Nov 05 16:33:25 dcacars[6477]: could not decode data -1 ^@Nov 05 16:33:25 dcacars[6477]: Exiting ^@Nov 05 16:33:25 dcacars[6483]: Starting up ^@ creating temporary netcdf file .tmp_netcdf.EiYAAn look gempak/acars/.tmp_netcdf.EiYAAn now will input netcdf from gempak/acars/.tmp_netcdf.EiYAAn Nov 05 16:33:25 dcacars[6483]: Could not open gempak/acars/.tmp_netcdf.EiYAAn ^@Nov 05 16:33:25 dcacars[6483]: could not decode data -1 ^@Nov 05 16:33:25 dcacars[6483]: Exiting ^@Nov 05 16:43:07 dcacars[6604]: Starting up ^@ creating temporary netcdf file .tmp_netcdf.dubtje look gempak/acars/.tmp_netcdf.dubtje now will input netcdf from gempak/acars/.tmp_netcdf.dubtje Nov 05 16:43:07 dcacars[6604]: Could not open gempak/acars/.tmp_netcdf.dubtje ^@Nov 05 16:43:07 dcacars[6604]: could not decode data -1 ^@Nov 05 16:43:07 dcacars[6604]: Exiting It looks like it creates the temporary file but cannot find it again after it is created. Donna Tucker 1475 Jayhawk Blvd. Associate Professor 213 Lindley Hall address@hidden Department of Geography (785) 864-4738 University of Kansas (785) 864-5378 (fax) Lawrence, KS 66045-7613 > > Donna, > > This sounds as if you are either using a windows editor to look at > the pqact.conf file, or your mail reader isn't on your unix box. > > I placed the file at: > my.unidata.ucar.edu/content/software/gempak/pqact.ku > > I added the "xv" flags to the -l for debug output as well. > > You can go to that URL and do a "save as" to avoid your mail mime tool. > > The LDM pqact has lots of trouble if the pqact.conf is edited > with a windows editor and has not been passed through "dos2unix". > > Since you are seeing the time stamp of the directory changing, > then the .temporary_netcdf file should be getting created, however > since you don't get the resultant GEMPAK file, then possibly either > the file name is getting clobbered with the spaces, or your > $GEMTBL/pack/acars.pack is unreadable by the ldm user (weasw). > > Steve Chiswell > Unidata User Support > > > >From: address@hidden > >Organization: UCAR/Unidata > >Keywords: 200411041654.iA4GsrvV002374 > > >Chiz, > > > >The attachment you sent arrived with a bunch of ^M characters in it. > >Was this what you intended? I did go into pqact.conf and get rid of > >all the spaces at the end of lines for the dcacars section. I am still > >getting the same error messages with no gempak acars files being written. > >I did notice that the directory for acars updates its time i.e. > > > >drwxr-xr-x 2 weasw weasw 4096 Nov 4 10:43 acars > > > >The time on the directory is the same as the time on the dcacars.log > >file. Thus, LDM appears to be trying to access the directory. This > >may have been happening before and I did not notice it. Again this > >is puzzling as LDM is run by weasw who owns this directory. All the > >other directories have the same permissions and there is no trouble > >writing to them. > > > > > >Donna Tucker 1475 Jayhawk Blvd. > >Associate Professor 213 Lindley Hall > >address@hidden Department of Geography > >(785) 864-4738 University of Kansas > > > >(785) 864-5378 (fax) Lawrence, KS 66045-7613 > > > > > > > >> > >> > >> Donna, > >> > >> I see a bunch of stray space characters at the end of lines in your > >> pqact file, and I'm wondering if the problem is the decoder is > >> getting the path as " data/gempak/acars" instead of "data/gempak/acars". > >> > >> I have attached a clipped out and cleaned up segment of the dcacars > >> invocation. Can you open this into your editor and use as is > >> instead of the lines for dcgunzip/dcacars you have now? > >> > >> If this fixes your problem, then the problem is an artifact of the > >> editing of the pqact.conf entries originally provided. > >> > >> Steve Chiswell > >> Unidata User Support > >> **************************************************************************** > >> Unidata User Support UCAR Unidata > >> Program > >> 303 497 8643 P.O. Box 3000 > >> address@hidden Boulder, CO 80307 > >> ---------------------------------------------------------------------------- > >> Unidata WWW Service http://my.unidata.ucar.edu/content/support > >> **************************************************************************** > >> > >> On Wed, 3 Nov 2004 address@hidden wrote: > >> > >> > ---------- > >> > X-Sun-Data-Type: text > >> > X-Sun-Data-Description: text > >> > X-Sun-Data-Name: text > >> > X-Sun-Charset: us-ascii > >> > X-Sun-Content-Lines: 245 > >> > > >> > Chiz, > >> > > >> > I have made the changes you suggested below and I am still getting > >> > the same error messages in the log file and no gempak acars files > >> > being written. Attached is the pqact.conf file - see what you make > >> > of it. > >> > > >> > Donna Tucker 1475 Jayhawk Blvd. > >> > Associate Professor 213 Lindley Hall > >> > address@hidden Department of Geography > >> > (785) 864-4738 University of Kansas > >> > (785) 864-5378 (fax) Lawrence, KS 66045-7613 > >> > > >> > > >> > > > >> > > Donna, > >> > > From the command line: > >> > > > >> > > >[ chinook-weasw ] /lsw/wea/gempak/bin/linux/dcgunzip > >> > > >200411011800.nc.gz > >> > > >200411011800.nc.gz: Permission denied. > >> > > > >> > > should be: > >> > > > >> > > cat 200411011800.nc.gz | /lsw/wea/gempak/bin/linux/dcgunzip \ > >> > > /lsw/wea/gempak/bin/linux/dcacars \ > >> > > -e GEMTBL=/lsw/wea/gempak/gempak/tables \ > >> > > -l /var/wea/gempak/dcacars.log \ > >> > > gempak/acars/YYYYMMDDHH_acars.gem > >> > > > >> > > Two things above, remove the "-b 30" since we aren't using NN in > >> > > the file name template, and 2, the dcacars line is the argument > >> > > to the script with the gz file as piped input. > >> > > > >> > > Perhaps we should set the environmental variabled in the dcgunzip > >> > > script and clean up the pqact.conf entry. > >> > > > >> > > Try the following in dcgunzip: > >> > > > >> > > echo "$argv" | logger -t "$0 [$$]" -p local0.notice > >> > > setenv PATH ${PATH}:/lsw/wea/gempak/bin/linux <<--- add this > >> > > line > >> > > setenv GEMTBL /lsw/wea/gempak/gempak/tables <<--- add this > >> > > line > >> > > cat | /usr/bin/gunzip -c | $argv > >> > > > >> > > Then change your pqact.conf to be: > >> > > > >> > > PCWS <tab> ^FSL\.CompressedNetCDF\.MADIS\.acars\. > >> > > <tab> PIPE <tab> -close <tab> /lsw/wea/gempak/bin/linux/dcgunzip dcac > > ars > >> > > <tab> -l /var/wea/gempak/dcacars.log gempak/acars/YYYYMMDDHH_acars.ge > > m > >> > > > >> > > > >> > > It could be something as simple as an extra "space" or "tab" character > >> > > f > > ollowing > >> > > the filename in your pqact.conf. If you send me your pqact.conf file > >> > > as an attachment, I can see if there are any stray unprintable > >> > > character > > s > >> > > in it. > >> > > > >> > > Steve Chiswell > >> > > Unidata User Support > >> > > > >> > > > >> > > > >> > > >From: address@hidden > >> > > >Organization: UCAR/Unidata > >> > > >Keywords: 200411012125.iA1LPevV020898 > >> > > > >> > > >Chiz, > >> > > > > >> > > >Thanks for the info on the model soundings. > >> > > > > >> > > >Yes, I still do not get the decoded acars soundings. I am getting the > >> > > >raw files. I can decode the raw files manually but would like to > >> > > >get the decode done automatically. I don't know if the following > >> > > >information will help but it shows how difficult this problem is. > >> > > >Note that the profiler data from FSL are decoded and written just > >> > > >fine. > >> > > >From my pqact.conf file > >> > > > > >> > > >FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.(01hr)\. > >> > > > PIPE -close > >> > > > /lsw/wea/gempak/bin/linux/dcncprof > >> > > > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > > > -l /var/wea/gempak/dcncprof.log > >> > > > gempak/profiler/YYYYMMDD_pro.gem > >> > > > > >> > > >PCWS ^FSL\.CompressedNetCDF\.MADIS\.acars\. > >> > > > PIPE -close > >> > > > /lsw/wea/gempak/bin/linux/dcgunzip > >> > > > /lsw/wea/gempak/bin/linux/dcacars -b 30 > >> > > > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > > > -l /var/wea/gempak/dcacars.log > >> > > > gempak/acars/YYYYMMDDHH_acars.gem > >> > > > > >> > > >The gempak directory looks like > >> > > > > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 14:59 acars > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 15:00 acft > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 14:47 airm > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 14:10 csig > >> > > >drwxr-xr-x 2 weasw weasw 4096 Oct 31 06:00 drops > >> > > >drwxr-xr-x 2 weasw weasw 12288 Nov 1 15:01 hrs > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 14:37 isig > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 10:44 mos > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 14:24 ncon > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 14:31 nldn > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 15:04 profiler > >> > > >drwxr-xr-x 2 weasw weasw 8192 Nov 1 15:03 radar > >> > > >drwxr-xr-x 2 weasw weasw 4096 Nov 1 14:06 rdf > >> > > >drwxr-xr-x 2 weasw weasw 4096 Oct 31 17:51 scd > >> > > >drwxr-xr-x 10 weasw weasw 4096 May 27 17:18 storm > >> > > >drwxr-xr-x 2 weasw weasw 4096 Oct 31 17:32 surface > >> > > >drwxr-xr-x 2 weasw weasw 4096 Oct 31 17:22 taf > >> > > >drwxr-xr-x 2 weasw weasw 4096 Oct 31 17:46 upperair > >> > > > > >> > > >Note that all the directories have the same permissions. I don't know > >> > > >why the LDM will write to all these other directories and not the > >> > > >acars one. Note that the software and the data reside on separate > >> > > >filesystems. One thing that does seem strange when decoding the raw > >> > > >files. > >> > > > > >> > > >[ chinook-weasw ] /lsw/wea/gempak/bin/linux/dcgunzip > >> > > >200411011800.nc.gz > >> > > >200411011800.nc.gz: Permission denied. > >> > > > > >> > > > > >> > > >[ chinook-weasw ] gunzip 200411011800.nc.gz > >> > > > > >> > > >It does not like the first command. The second command unzips fine. > >> > > >The same user runs both commands. dcacars also runs fine from the > >> > > >command line and will write to /data/wea/gempak/acars. > >> > > > > >> > > > > >> > > > > >> > > >For review the dcacars.log file looks like > >> > > > > >> > > > > >> > > >^@Oct 29 19:23:36 dcacars[21807]: Could not open > >> > > >gempak/acars/.tmp_netc > > df.T9Jl > >> > > > 7A > >> > > >^@Oct 29 19:23:36 dcacars[21807]: could not decode data -1 > >> > > >^@Oct 29 19:23:36 dcacars[21813]: Could not open > >> > > >gempak/acars/.tmp_netc > > df.VFXD > >> > > > 4C > >> > > >^@Oct 29 19:23:36 dcacars[21813]: could not decode data -1 > >> > > >^@Oct 29 19:23:49 dcacars[21820]: Could not open > >> > > >gempak/acars/.tmp_netc > > df.jOaw > >> > > > pW > >> > > >^@Oct 29 19:23:49 dcacars[21820]: could not decode data -1 > >> > > >^@Oct 29 19:23:49 dcacars[21826]: Could not open > >> > > >gempak/acars/.tmp_netc > > df.pQrv > >> > > > 7W > >> > > >^@Oct 29 19:23:49 dcacars[21826]: could not decode data -1 > >> > > >^@Oct 29 19:23:53 dcacars[21832]: Could not open > >> > > >gempak/acars/.tmp_netc > > df.XOSI > >> > > > MJ > >> > > >^@Oct 29 19:23:53 dcacars[21832]: could not decode data -1 > >> > > >^@Oct 29 19:23:53 dcacars[21838]: Could not open > >> > > >gempak/acars/.tmp_netc > > df.91lR > >> > > > cK > >> > > >^@Oct 29 19:23:53 dcacars[21838]: could not decode data -1 > >> > > >^@Oct 29 19:33:36 dcacars[21971]: Could not open > >> > > >gempak/acars/.tmp_netc > > df.tauO > >> > > > 6c > >> > > >^@Oct 29 19:33:36 dcacars[21971]: could not decode data -1 > >> > > > > >> > > > > >> > > >Donna Tucker 1475 Jayhawk Blvd. > >> > > >Associate Professor 213 Lindley Hall > >> > > >address@hidden Department of Geography > >> > > >(785) 864-4738 University of Kansas > >> > > > > >> > > >(785) 864-5378 (fax) Lawrence, KS 66045-7613 > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > >> >From: address@hidden > >> > > >> >Organization: UCAR/Unidata > >> > > >> >Keywords: 200410291937.i9TJbIvV018585 > >> > > >> > >> > > >> >Does CONDUIT or another data stream contain the NCEP model > >> > > >> >soundings > > . > >> > > >> >I know that GEMPAK will generate soundings at the grid points from > >> > > >> >the gridded data but I had a request for the NCEP produced > >> > > >> >soundings > > . > >> > > >> >Is that in any of the Unidata data streams? > >> > > >> > > >> > > >> >Donna Tucker 1475 Jayhawk Blvd. > >> > > >> >Associate Professor 213 Lindley Hall > >> > > >> >address@hidden Department of Geography > >> > > >> >(785) 864-4738 University of Kansas > >> > > >> > > >> > > >> >(785) 864-5378 (fax) Lawrence, KS 66045-7613 > >> > > > > >> > > >> > > >> > > >> > > >> > > >> -- > >> > > >> > >> > > >> Donna, > >> > > >> > >> > > >> No, the NCEP bufr files aren't part of the Unidata IDD. They can be > >> > > >> downloaded (via FTP) and decoded into GEMPAK using namsnd into a > >> > > >> surf > > ace > >> > > >> (for meteorogram) and upper air file (for sounding) for plotting. > >> > > >> > >> > > >> Also, back to dcncprof where I'm still scratching my head.... now > >> > > >> after the workshop is over I can scratch harder again. > >> > > >> The log message you had was that the temporary file couldn't be > >> > > >> creat > > ed. > >> > > >> Is it still the case that you get no output? Can you run as the > >> > > >> accou > > nt that > >> > > >> runs the LDM using the pqact arguments? Just for clarification, your > >> > > >> failed path is: > >> > > >> gempak/acars/.tmp_netcdf.p8dsYD > >> > > >> Whereas our usual path is a data/gempak directory under the LDM > >> > > >> accou > > nt tree > >> > > > . > >> > > >> I know your don't have a ~ldm user account, but where is your > >> > > >> $GEMDAT > > A tree > >> > > >> in relation to that location of $LDMHOME? > >> > > >> > >> > > >> > >> > > >> Steve Chiswell > >> > > >> ********************************************************************* > > ******* > >> > > > < > >> > > >> Unidata User Support UCAR > >> > > >> Unidata > > Program > >> > > > < > >> > > >> (303)497-8643 P.O. > >> > > >> B > > ox 3000 > >> > > > < > >> > > >> address@hidden Boulder, C > > O 80307 > >> > > > < > >> > > >> --------------------------------------------------------------------- > > ------- > >> > > > < > >> > > >> Unidata WWW Service > >> > > >> http://my.unidata.ucar.edu/content/s > > upport > >> > > > < > >> > > >> --------------------------------------------------------------------- > > ------- > >> > > > < > >> > > >> NOTE: All email exchanges with Unidata User Support are recorded in > >> > > >> t > > he > >> > > >> Unidata inquiry tracking system and then made publicly available > >> > > >> through the web. If you do not want to have your interactions made > >> > > >> available in this way, you must let us know in each email you send > >> > > >> to > > us. > >> > > >> > >> > > > > >> > > -- > >> > > ************************************************************************ > > **** < > >> > > Unidata User Support UCAR Unidata > >> > > Pro > > gram < > >> > > (303)497-8643 P.O. > >> > > Box > > 3000 < > >> > > address@hidden Boulder, CO 8 > > 0307 < > >> > > ------------------------------------------------------------------------ > > ---- < > >> > > Unidata WWW Service > >> > > http://my.unidata.ucar.edu/content/supp > > ort < > >> > > ------------------------------------------------------------------------ > > ---- < > >> > > NOTE: All email exchanges with Unidata User Support are recorded in the > >> > > Unidata inquiry tracking system and then made publicly available > >> > > through the web. If you do not want to have your interactions made > >> > > available in this way, you must let us know in each email you send to > >> > > us > > . > >> > > > >> > ---------- > >> > X-Sun-Data-Type: default > >> > X-Sun-Data-Description: default > >> > X-Sun-Data-Name: pqact.conf > >> > X-Sun-Charset: us-ascii > >> > X-Sun-Content-Lines: 984 > >> > > >> > # > >> > # pqact.conf > >> > # > >> > > >> > # > >> > # Text products > >> > # > >> > > >> > WMO ^FPUS53 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_zfore > >> > WMO ^FOUS53 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_dzone > >> > WMO ^AWUS83 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_kssum > >> > WMO ^FGUS53 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_hydro > >> > WMO ^ABUS0[46] KTOP ([0-3][0-9])([0-2][0-9]) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_hlday > >> > > >> > WMO ^FPUS83 KTOP (..)(..) > >> > FILE -strip -close > >> > forecasts/local/(\1:yy)(\1:mm)\1\2_fdanger > >> > WMO ^FNUS53 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_fplan > >> > WMO ^FNUS63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_range > >> > WMO ^FNUS73 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_fire > >> > WMO ^FNUS83 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_frate > >> > WMO ^WWUS83 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_fwtch > >> > WMO ^FNUS2. .... (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_fout > >> > WMO ^FLUS43 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_hazard > >> > WMO ^...... KTOP ([0-3][0-9])([0-2][0-9]).*/pHWO > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_hzolk > >> > WMO ^FGUS43 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FGUS73 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_hyolk > >> > WMO ^FGUS83 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEUS43 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEUS63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEUS7[0-9] KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_ext > >> > WMO ^FEUS8[0-9] KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_mon > >> > WMO ^AUUS43 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^AWUS53 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^AWUS63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_regwea > >> > WMO ^WGUS4. KTOP (..)(..) > >> > FILE -strip -close > >> > forecasts/local/(\1:yy)(\1:mm)\1\2_fldwtch > >> > WMO ^WGUS5. KTOP (..)(..) > >> > FILE -strip -close > >> > forecasts/local/(\1:yy)(\1:mm)\1\2_fldwarn > >> > WMO ^AXUS43 KTOP (..)(..) > >> > FILE -strip -close weather/local/(\1:yy)(\1:mm)\1\2_hround > >> > WMO ^...... KTOP ([0-3][0-9])([0-2][0-9]).*/p(LFP|AFP) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_mtro > >> > WMO ^FQCA01 KTOP ([0-3][0-9])([0-2][0-9]) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_mtro > >> > WMO ^FPAK1[12] KTOP ([0-3][0-9])([0-2][0-9]) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_mtro > >> > > >> > WMO ^NOUS43 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_notice > >> > WMO ^NOUS53 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_notice > >> > WMO ^NOUS63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_notice > >> > > >> > WMO ^SEUS63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^SHUS43 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^SEUS63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > > >> > WMO ^...... KTOP ([0-3][0-9])([0-2][0-9]).*/pNOW > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_now > >> > > >> > WMO ^FXUS63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_disc > >> > > >> > WMO ^FXUS73 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_fire > >> > > >> > WMO ^ABUS3. KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_ststorm > >> > > >> > WMO ^FEXC73 KWBC (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_week > >> > WMO ^FEXC43 KWBC (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEXC53 KWBC (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEXC63 KWBC (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEXE.3 KWBC (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEXS.3 KWBC (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^FEXW.3 KWBC (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > > >> > > >> > # Append local watches and warnings to local weather file > >> > > >> > PPS ^W..... (KTOP|KMCI|KICT) (..)(..) > >> > FILE -close weather/severe/local/%y%m%d%H_ww > >> > # PPS ^W..... KTOP (..)(..) > >> > # PIPE -close lp > >> > > >> > > >> > # Append all other nontropical watches and warnings to us weather file > >> > > >> > PPS ^W..... K... (..)(..) > >> > FILE -close weather/severe/us/%y%m%d%H_ww > >> > > >> > > >> > # Append all tropical advisories to tropical directory file > >> > > >> > PPS ^WT.... K... (..)(..) > >> > FILE -close tropical/%y%m%d%H_advis > >> > PPS ^WO.... K... (..)(..) > >> > FILE -close tropical/%y%m%d%H_advis > >> > > >> > > >> > # Append all other extended forecasts to us extended files > >> > > >> > PPS ^FEUS.. K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/%y%m%d_extend > >> > > >> > PPS ^FXUS05 KWBC ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/long/%y%m%d_90day > >> > > >> > PPS ^FXUS06 KWBC ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/long/%y%m%d_6_10day > >> > > >> > PPS ^FXUS07 KWBC ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/long/%y%m%d_30day > >> > > >> > > >> > # Aviation forecasts in aviation directory > >> > DDS ^FB.... K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_wintem > >> > DDS ^UB.... K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_pireps > >> > DDS ^FAAK.. K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_fore > >> > DDS ^FAUS.. K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_fore > >> > DDS ^FD.... K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_wind > >> > DDS ^FTUS31 K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_tafs > >> > DDS ^FTUS80 K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_tafs > >> > DDS ^FRUS.. K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_route > >> > > >> > # Sigmets in aviation directory > >> > DDS ^WS.... K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close aviation/%y%m%d_sig > >> > > >> > # Air pollution related data in airqual directory > >> > PPS ^FK.... K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close airqual/%y%m%d_stag > >> > > >> > # Public information > >> > PPS ^ABUS34 (KTOP|KMCI|KICT) > >> > FILE -strip -close misc/%y%m%d%H_pinfo > >> > WMO ^...... (KTOP|KMCI|KICT) ([0-3][0-9])([0-2][0-9]).*/pOAV > >> > FILE -strip -close misc/%y%m%d%H_foren > >> > WMO ^AHXN.. (KWBC) > >> > FILE -strip -close misc/%y%m%d%H_what > >> > WMO ^CSXX.. .... > >> > FILE -strip -close misc/%y%m%d%H_what > >> > > >> > # Marine forecasts in ocean directory > >> > PPS ^FZ.... K... > >> > FILE -strip -close ocean/%y%m%d_mfore > >> > > >> > # River conditions in hydro directory > >> > PPS ^SR.... (KTOP|KMCI|KICT) > >> > FILE -strip -close hydro/%y%m%d_hydat > >> > PPS ^RWUS1. .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close hydro/(\1:yy)(\1:mm)\1\2_river > >> > WMO ^SXUS70 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close hydro/(\1:yy)(\1:mm)\1\2_hdisc > >> > WMO ^SXUS43 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_road > >> > WMO ^SXUS53 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^SXUS73 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^SEXX63 KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > WMO ^RWUS3. KTOP (..)(..) > >> > FILE -strip -close forecasts/local/(\1:yy)(\1:mm)\1\2_what > >> > > >> > # Satellite data into sat directory > >> > DDS ^TB.... K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2)[0-9]) > >> > FILE -close sat/%y%m%d_satdat > >> > > >> > # Append convective outlook to us file > >> > PPS ^ACUS01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_conout > >> > PPS ^ACUS02 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/us/(\1:yy)(\1:mm)\1\2_conout > >> > PPS ^ACUS03 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_condisc > >> > PPS ^ACUS09 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_conwhat > >> > PPS ^ACUS11 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_mesodis > >> > PPS ^ACUS33 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_conwhat > >> > PPS ^ACUS2. .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_conwhat > >> > PPS ^ACUS3 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_conwhat > >> > PPS ^RWUS4 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_ffpoten > >> > PPS ^RWUS5 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_wsout > >> > PPS ^RWUS9 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_nflood > >> > PPS ^FXUS10 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_modiag > >> > PPS ^FXUS04 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_qpfdisc > >> > PPS ^FXUS07 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_shorthy > >> > PPS ^FXCA20 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/int/(\1:yy)(\1:mm)\1\2_cardisc > >> > PPS ^FXSA20 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/int/(\1:yy)(\1:mm)\1\2_sadisc > >> > PPS ^FXHW01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_hawdisc > >> > PPS ^AEUS41 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_uvfore > >> > PPS ^FOUS11 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_snowice > >> > PPS ^FOUS6. .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_ffguid > >> > PPS ^AGUS7. .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_hmdisc > >> > PPS ^FMUS23 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_heat > >> > PPS ^FNUS2. .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_foutlk > >> > > >> > # Append other severe outlooks to us files > >> > PPS ^FXUS01 K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/%y%m%d_srdisc > >> > PPS ^FXUS02 K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/%y%m%d_pdisc > >> > PPS ^FXUS03 K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/%y%m%d_pdisc > >> > PPS ^FXUS04 K[A-Z][A-Z][A-Z] ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/%y%m%d_qpfout > >> > WMO ^FOUS6[1-6] K([^W]..|W[^N].|WN[^O]) ([0-3][0-9])([0-2][0-9]) > >> > FILE forecasts/us/(\2:yy)(\2:mm)\2\3.ffg > >> > WMO ^RWUS09 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE forecasts/us/(\1:yy)(\1:mm)\1\2.natl > >> > PPS ^ACUS41 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE -close forecasts/us/(\1:yy)(\1:mm)\1\2_stormsum > >> > > >> > # Append climate data to climate file > >> > DDS ^(CS|CX).... (KTOP|KMCI|KICT) > >> > FILE -strip -close climate/%y%m%d_local > >> > WMO ^CDUS43 KTOP (..)(..) > >> > FILE -strip -close > >> > forecasts/local/(\1:yy)(\1:mm)\1\2_climneks > >> > > >> > > >> > # Append prog and forecast discussions to prog and disc files > >> > DDS ^FXUS.. KWBC > >> > FILE -close forecasts/us/%y%m%d_prog > >> > > >> > # Earthquake reports > >> > PPS ^SE.... .... > >> > FILE -strip -close quakes/%y%m%d_quake > >> > > >> > > >> > # State and regional temperature and precipitation data > >> > > >> > PPS ^ASUS63 (KTOP|KEAX|KICT) > >> > FILE -strip -close weather/local/%y%m%d%H_stp > >> > > >> > PPS ^ASUS63 (KTOP|KEAX|KICT) > >> > FILE -strip -close weather/local/%y%m%d%H_mmp > >> > WMO ^ASUS53 KTOP (..)(..) > >> > FILE -strip -close weather/local/(\1:yy)(\1:mm)\1\2_round > >> > WMO ^ASUS43 KTOP (..)(..) > >> > FILE -strip -close weather/local/(\1:yy)(\1:mm)\1\2_round > >> > > >> > PPS ^SXUS99 (KTOP|KEAX|KICT) > >> > FILE -strip -close weather/local/%y%m%d%H_record > >> > PPS ^SXUS7. (KTOP|KEAX|KICT) > >> > FILE -strip -close weather/local/%y%m%d%H_record > >> > > >> > > >> > # Selected cities in us weather file > >> > PPS ^ABUS23 KWBC > >> > FILE -strip -close weather/us/%y%m%d%H_wselect > >> > PPS ^ABUS24 KWBC > >> > FILE -strip -close weather/us/%y%m%d%H_eselect > >> > PPS ^ABUS25 KWBC > >> > FILE -strip -close weather/us/%y%m%d%H_cselect > >> > PPS ^ABUS26 KWBC > >> > FILE -strip -close weather/us/%y%m%d%H_oselect > >> > WMO ^AXUS46 KSGX > >> > FILE -strip -close weather/mx/%y%m%d%H_round > >> > WMO ^AXXX8. KWNP > >> > FILE -strip -close weather/space/%y%m%d%H_space > >> > WMO ^AXXX01 KBOU > >> > FILE -strip -close weather/space/%y%m%d%H_space > >> > # Observed rainfall us weather file > >> > WMO ^SRU[EMSW][1-6][0-9] .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/us/(\1:yy)(\1:mm)\1\2.obs > >> > WMO ^RRUS01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/us/(\1:yy)(\1:mm)\1\2.obs > >> > WMO ^SXHW01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/us/(\1:yy)(\1:mm)\1\2.obs > >> > # > >> > > >> > # INT weather > >> > > >> > WMO ^ABXX0[567] .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.tp_summ > >> > WMO ^ABCA01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.tp_summ > >> > WMO ^FPCN60 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.tp_summ > >> > WMO ^WBCN02 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.tp_summ > >> > WMO ^ABCN01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.cantp > >> > WMO ^ASCN51 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.quebtp > >> > WMO ^ASMX46 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.mxtp > >> > WMO ^ASCA44 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.caribtp > >> > WMO ^SXCA01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.panamtp > >> > WMO ^ABXX07 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.latintp > >> > WMO ^ABXX06 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/int/(\1:yy)(\1:mm)\1\2.inttp > >> > > >> > > >> > # Put products of agricultural interest in ag files > >> > PPS ^ABUS.. KAUO > >> > FILE -strip -close ag/%y%m%d_ag > >> > PPS ^CXUS.. KAUO > >> > FILE -strip -close ag/%y%m%d_uswc > >> > PPS ^ABUS[50-79] KTOP > >> > FILE -strip -close ag/%y%m%d_ag > >> > PPS ^FXUS09 (KTOP|KMCI|KICT) > >> > FILE -strip -close ag/%y%m%d%H_wcrop > >> > PPS ^SXUS04 (KTOP|KMCI|KICT) > >> > FILE -strip -close ag/%y%m%d%H_obs > >> > > >> > #### DDS IDS PPS > >> > # Create raw files for WXP. These entries file raw data where WXP > >> > decoder > > s > >> > # expect to find it. > >> > # > >> > > >> > ## > >> > # Watch boxes in yymmddhh_wws.wmo > >> > DDS ^WWUS40 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE weather/severe/(\1:yy)(\1:mm)\1\2_wws.wmo > >> > > >> > # Fronts in yymmddhh_frt.wmo > >> > DDS ^ASUS01 .... ([0-3][0-9])([0-2][0-9]) > >> > FILE surface/front/(\1:yy)(\1:mm)\1\2_frt.wmo > >> > > >> > # Buoy reports in yymmddhh_boy.wmo > >> > DDS|IDS ^S[NS].... .... ([0-3][0-9])([0-2][0-9]) > >> > FILE surface/boy/(\1:yy)(\1:mm)\1\2_boy.wmo > >> > > >> > # Radar in yymmddhh_rad.wmo > >> > DDS ^SDUS.. .... ([0-3][0-9])([0-2][0-9]) > >> > FILE surface/radar/(\1:yy)(\1:mm)\1\2_rad.wmo > >> > > >> > # US and Canadian sfc obs and specials in hourly files yymmddhh_sao.wmo > >> > DDS|IDS ^S[AP][ACHMNPUX][AEKMNSUWX].. .... ([0-3][0-9])([0-2][0-9]) > >> > STDIOFILE surface/sao/(\1:yy)(\1:mm)\1\2_sao.wmo > >> > # > >> > # upper air reports in hourly files yymmddhh_upa.wmo > >> > # > >> > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9]) > >> > STDIOFILE upperair/(\1:yy)(\1:mm)\1\2_upa.wmo > >> > # > >> > # fous in yymmddhh.mod > >> > DDS ^FO.... .... ([0-3][0-9])([0-2][0-9]) > >> > STDIOFILE forecasts/mod/(\1:yy)(\1:mm)\1\2_mod.wmo > >> > > >> > # Synoptic reports (SYNOP,SHIP) in yymmddhh_syn.wmo > >> > DDS|IDS ^S[IMN].... .... ([0-3][0-9])([0-2][0-9]) > >> > STDIOFILE surface/syn/(\1:yy)(\1:mm)\1\2_syn.wmo > >> > > >> > > >> > #### HRS > >> > # GEMPAK actions for HRS > >> > # > >> > # > >> > # NMC GRIB products > >> > # > >> > # ETA 80 km model output for continental US on Lambert conformal grid > >> > (#21 > > 1 grid) > >> > # decode into into yymmddhh_eta.gem > >> > # > >> > HRS ^[YZ].U.*/mETA > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_eta20.gem > >> > # > >> > HRS ^[YZ].R.*/mETA > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_eta40.gem > >> > > >> > HRS ^[YZ].B.*/mETA > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_eta12.gem > >> > # > >> > # RUC MAPS model output decoded into yymmddhh_ruc.gem (#211 grid) > >> > # > >> > HRS ^[YZ].Q.*/mRUC > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_ruc.gem > >> > # > >> > # NGM model output decoded into yymmddhh_ngm.gem (#211 grid) > >> > # > >> > HRS ^[YZ].Q.*/mNGM > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_ngm.gem > >> > # > >> > # AVN model output decoded into yymmddhh_avn.gem (#211 grid) > >> > # > >> > HRS ^[YZ].Q... KWB. ([0-3][0-9])([0-2][0-9]).*(/mAVN|/mSSIAVN) > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_avn.gem > >> > # > >> > # Global AVN (Spectral) Thinned grids > >> > # > >> > HRS ^H.[I-P]... KWBC ([0-3][0-9])([0-2][0-9]).* > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_thin.gem > >> > > >> > HRS ^H.[I-P]... KWBK ([0-3][0-9])([0-2][0-9]).* > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_ens.gem > >> > # > >> > #MRF grids > >> > # > >> > # NOAAport MRF grids > >> > # Grid #201 N. Hemisphere 381km: ^Y.A... KWBH > >> > # Grid #202 CONUS 190km: ^Y.I... KWBH > >> > # Grid #203 Alaska 190km: ^Y.J... KWBH > >> > # Grid #204 Hawaii 160km: ^Y.K... KWBH > >> > # Grid #205 Puerto Rico 190km: ^Y.L... KWBH > >> > # Select any/all grids desired from [AIJKL] > >> > HRS ^Y.I... KWBH > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_mrf.gem > >> > # > >> > # MRF grids - Extended range grids E and F > >> > # > >> > HRS ^H.[EF][A-Z][0-9][0-9] KWB. ([0-3][0-9])([0-2][0-9]).. > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_mrfex.gem > >> > # > >> > # > >> > # Spectral grids - grids A,B,C,D Global grid Forecasts (wind & waves, > >> > te > > mperature) > >> > ## > >> > HRS ^H[A-Z][ABCD][A-Z][0-9][0-9] KWB. ([0-3][0-9])([0-2][0-9]).. > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_spec.gem > >> > # > >> > # Bitmap ocean > >> > # > >> > HRS ^H[HKLTUV][T-W][ACEIK]93 KWB. ([0-3][0-9])([0-2][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_ocn2.gem > >> > # > >> > # Ocean > >> > HRS ^O..... KWBJ > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_ocn.gem > >> > # > >> > # ICE > >> > HRS ^O..... KWBM > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_ice.gem > >> > # > >> > # River Guidance > >> > # Q, process 185 > >> > HRS ^[YZ].Q.88 (K[^W]..|KW[^B].) > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_river.gem > >> > # > >> > # > >> > # ECMWF GRIB products, decode into yymmdd_ecmf#.gem > >> > (e1=global,e2=+/-35lat > > ) > >> > # > >> > HRS ^H..... ECM. ([0-3][0-9])([0-2][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > PACK gempak/hrs/YYYYMMDDHH_ecmf.gem > >> > # > >> > # UKMET grids > >> > HRS ^H..... EGRR > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_ukmet.gem > >> > # > >> > # > >> > # > >> > # CMC GEM model > >> > # > >> > CMC CMC_GEM_reg > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_can.gem > >> > # > >> > NOGAPS ^US058 > >> > PIPE /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib_fnoc.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/hrs/YYYYMMDDHH_nogaps.gem > >> > # > >> > # US CONUS Radar Coded Message > >> > HDS ^HAXA00 K... > >> > PIPE -close /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib2_rcm.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/radar/YYYYMMDDHH_radar.gem > >> > # > >> > # National radar composite generated by GDRADR for IDD > >> > FNEXRAD ^radar_mosaic_national > >> > PIPE -close /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib2_radar.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/radar/YYYYMMDD_radr.gem > >> > # > >> > # Regional/Floater radar composite generated by GDRADR for IDD > >> > FNEXRAD ^radar_mosaic_regional_(.*) !.*! > >> > PIPE -close /lsw/wea/gempak/bin/linux/dcgrib2 > >> > -d /var/wea/gempak/dcgrib2_radar.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/radar/YYYYMMDD_float_\1.gem > >> > # > >> > # FSL NetCDF Wind Profiler data > >> > # > >> > FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.(01hr)\. > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dcncprof > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > -l /var/wea/gempak/dcncprof.log > >> > gempak/profiler/YYYYMMDD_pro.gem > >> > > >> > FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.(06min)\. > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dcncprof > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > -l /var/wea/gempak/dcncprof.log > >> > gempak/profiler/YYYYMMDD00_6min.gem > >> > > >> > # FSL ACARS data > >> > # > >> > #PCWS ^FSL\.NetCDF\.ACARS\.QC > >> > # PIPE -close > >> > # /lsw/wea/gempak/bin/linux/dcacars -b 30 > >> > # -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > # -l /var/wea/gempak/dcacars.log > >> > # gempak/acars/YYYYMMDDHHNN_acars.gem > >> > # > >> > PCWS ^FSL\.CompressedNetCDF\.MADIS\.acars\. > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dcgunzip dcacars > >> > -l /var/wea/gempak/dcacars.log > >> > gempak/acars/YYYYMMDDHH_acars.gem > >> > > >> > # > >> > ####### > >> > # NLDN stream > >> > # > >> > # Decode NLDN data as GEMPAK ship file (named YYMMDDHH.gem) > >> > # > >> > NLDN ^([12][0-9][0-9][0-9]|[0-9][0-9])([0-3][0-9][0-9])([0-2][0-9])( > > [0-5][0-9 ])([0-5][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcnldn -m 25000 -b 30 -s minu > > te05 > >> > -d /var/wea/gempak/dcnldn.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/nldn.pack > >> > gempak/nldn/YYMMDDHH.gem > >> > # > >> > #### DDS IDS > >> > # GEMPAK products > >> > # > >> > # US and Canadian sfc obs and specials > >> > # > >> > > >> > # sfc obs and specials > >> > # > >> > DDS|IDS ^S[AP].* .... ([0-3][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcmetr -b 9 -m 72 > >> > -d /var/wea/gempak/dcmetr.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/metar.pack > >> > -s /lsw/wea/gempak/gempak/tables/stns/sfworld.tbl > >> > gempak/surface/YYYYMMDD_sao.gem > >> > > >> > # upper air reports > >> > # > >> > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcuair -b 24 -n -m 16 > >> > -d /var/wea/gempak/dcuair.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/snmerg.pack > >> > -s /lsw/wea/gempak/gempak/tables/stns/snstns.tbl > >> > gempak/upperair/YYYYMMDD_upa.gem > >> > > >> > # Synoptic reports > >> > # > >> > DDS|IDS ^S([IMN][^VW].*|XUS2[0-3]) .... ([0-3][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dclsfc -a 2000 > >> > -d /var/wea/gempak/dclsfc.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/sfsyn.pack > >> > -s /lsw/wea/gempak/gempak/tables/stns/lsfstns.tbl > >> > gempak/surface/YYYYMMDD_syn.gem > >> > > >> > # > >> > # buoy and ship reports > >> > # > >> > DDS|IDS ^S([INS]V.*|MV[^NS].*) .... ([0-3][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcmsfc > >> > -d /var/wea/gempak/dcmsfc.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/surface/YYMMDD_sb.gem > >> > # > >> > # dropsonde reports > >> > WMO ^UZ > >> > PIPE /lsw/wea/gempak/bin/linux/dcuair > >> > -d /var/wea/gempak/dcuair_drop.log -a 50 -m 24 > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/drops/YYYYMMDD_drop.gem > >> > # > >> > # > >> > # NGM MOS > >> > # > >> > DDS|PPS ^FO(US14|AK1[34]|AK2[5-9]) .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcnmos > >> > -d /var/wea/gempak/dcnmos.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/ngmmos.pack > >> > -s /lsw/wea/gempak/gempak/tables/stns/ngmmos.stn > >> > gempak/mos/YYMMDDHH_nmos.gem > >> > # > >> > # MRF MOS > >> > # > >> > DDS ^(FOX[CESW].*|FOAK2[0-4]|FECN21) .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcmmos > >> > -d /var/wea/gempak/dcmmos.log > >> > -e GEMPAK=gempak/gempak > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/mos/YYMMDDHH_mmos.gem > >> > # old > >> > # > >> > #DDS ^(FOX[CESW].*|FOAK20|FECN21) .... ([0-3][0-9])([0-2][0-9]) > >> > # PIPE /lsw/wea/gempak/bin/linux/dcmmos > >> > # -d /var/wea/gempak/dcmmos.log > >> > # -p /lsw/wea/gempak/gempak/tables/pack/mrfmos.pack > >> > # -s /lsw/wea/gempak/gempak/tables/stns/mrfmos.stn > >> > # gempak/mos/YYMMDDHH_mmos.gem > >> > > >> > # > >> > # AVN MOS > >> > # > >> > DDS ^(FEX[CESW].*|FEAK2[0-4]|FECN20) .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcamos > >> > -d /var/wea/gempak/dcamos.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/mos/YYMMDDHH_amos.gem > >> > # > >> > # Decoder for New AVN MOS > >> > WMO ^(FOUS2[1-6]|FOAK3[7-9]|FOPA20) .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcgmos > >> > -d /var/wea/gempak/dcgmos.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/mos/YYYYMMDDHH_gmos.gem > >> > # > >> > # Decoder for New MRF MOS > >> > # Use GEMPAK in datatype.tbl to find climo tables > >> > WMO ^(FEUS2[1-6]|FEAK3[7-9]|FEPA20) > >> > PIPE /lsw/wea/gempak/bin/linux/dcxmos > >> > -d /var/wea/gempak/dcxmos.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/mos/YYYYMMDDHH_xmos.gem > >> > # > >> > # old > >> > # > >> > #DDS ^(FEX[CESW].*|FEAK20|FECN20) .... ([0-3][0-9])([0-2][0-9]) > >> > # PIPE /lsw/wea/gempak/bin/linux/dcamos > >> > # -d /var/wea/gempak/dcamos.log > >> > # -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > # -p /lsw/wea/gempak/gempak/tables/pack/avnmos.pack > >> > # -s /lsw/wea/gempak/gempak/tables/stns/avnmos.stn > >> > # gempak/mos/YYMMDDHH_amos.gem > >> > > >> > # > >> > # SPC storm reports > >> > # > >> > WMO ^NWUS2[02] KWNS ([0-3][0-9])([0-2][0-9]) > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dcstorm -m 2000 > >> > -d /var/wea/gempak/dcstorm.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/storm/sels/YYYYMMDD_sels.gem > >> > # > >> > # Watch box coordinates > >> > # > >> > WMO ^WWUS(40 KMKC|30 KWNS) > >> > PIPE /lsw/wea/gempak/bin/linux/dcwatch -t 30 > >> > -d /var/wea/gempak/dcwatch.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/storm/watches/watches_YYYY_MM.gem > >> > # > >> > WMO /p(TOR|SVR|FFW) > >> > PIPE /lsw/wea/gempak/bin/linux/dcwarn > >> > -d /var/wea/gempak/dcwarn.log > >> > -s /lsw/wea/gempak/gempak/tables/stns/county.tbl > >> > gempak/storm/warn/YYYYMMDDHH_warn.gem > >> > # > >> > WMO ^(WWUS(40|08)|WOUS20|WWUS30) > >> > PIPE /lsw/wea/gempak/bin/linux/dcwtch -t 30 > >> > -d /var/wea/gempak/dcwtch.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/storm/wtch/YYYYMMDDHH_wtch.gem > >> > # > >> > # Watchbox outlines /pSLSxx (WWUS32 and WWUS6[1-5]) > >> > WMO ^WWUS(6[1-6]|32) .... ([0-3][0-9])([0-2][0-9]).*/pSLS > >> > PIPE /lsw/wea/gempak/bin/linux/dcsvrl > >> > -d /var/wea/gempak/dcsvrl.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/storm/svrl/YYYYMMDDHH_svrl.gem > >> > # > >> > # Hurricane/tropical storm positions and forecasts > >> > # > >> > DDPLUS ^WTPZ4.* .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dctrop > >> > -d /var/wea/gempak/dctrop.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/tropic.pack > >> > gempak/storm/tropic/epacific/YYYY_@@.gem > >> > # > >> > DDPLUS ^WTPN3.* .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dctrop > >> > -d /var/wea/gempak/dctrop.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/tropic.pack > >> > gempak/storm/tropic/wpacific/YYYY_@@.gem > >> > # > >> > DDPLUS ^WTNT4.* .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dctrop > >> > -d /var/wea/gempak/dctrop.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/tropic.pack > >> > gempak/storm/tropic/atlantic/YYYY_@@.gem > >> > # > >> > DDPLUS ^WTPA4.* .... ([0-3][0-9])([0-2][0-9]) > >> > PIPE -close > >> > /lsw/wea/gempak/bin/linux/dctrop > >> > -d /var/wea/gempak/dctrop.log > >> > -p /lsw/wea/gempak/gempak/tables/pack/tropic.pack > >> > gempak/storm/tropic/cpacific/YYYY_@@.gem > >> > # > >> > # Decoder for Winter Warnings, Watches and Advisories > >> > # > >> > WMO ^WWUS4[1-6] .... ([0-3][0-9])([0-2][0-9]).*/pWSW > >> > PIPE /lsw/wea/gempak/bin/linux/dcwstm > >> > -d /var/wea/gempak/dcwstm.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/storm/wstm/YYYYMMDDHH.wstm > >> > # > >> > # flash flood guidence > >> > # > >> > WMO ^.*/p(FFG|FFH) > >> > PIPE /lsw/wea/gempak/bin/linux/dcffg > >> > -d /var/wea/gempak/dcffg.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/storm/ffg/YYMMDD_ffg.gem > >> > # > >> > # Decoder for Supplemental Climatological Data (SCD) > >> > DDPLUS|IDS ^.*/pSCD > >> > PIPE /lsw/wea/gempak/bin/linux/dcscd > >> > -d /var/wea/gempak/dcscd.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/scd/YYYYMMDD_scd.gem > >> > # > >> > # Decoder for Aircraft Observations > >> > DDPLUS|IDS (^U[ABDR].... ....|^XRXX84 KAWN|^YIXX84 KAWN) > >> > ([0-3][0-9])([0-2 > > ][0-9]) > >> > PIPE /lsw/wea/gempak/bin/linux/dcacft > >> > -d /var/wea/gempak/dcacft.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/acft/YYYYMMDDHH_acf.gem > >> > # > >> > # Decoder for Airmets > >> > WMO ^WAUS01 > >> > PIPE /lsw/wea/gempak/bin/linux/dcairm > >> > -d /var/wea/gempak/dcairm.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/airm/YYYYMMDDHH_airm.gem > >> > # > >> > # Decoder for International Sigmets > >> > IDS|DDPLUS ^WS.... (KKCI|[^K]...) > >> > PIPE /lsw/wea/gempak/bin/linux/dcisig > >> > -d /var/wea/gempak/dcisig.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/isig/YYYYMMDDHH_isig.gem > >> > # > >> > # > >> > # Decoder for Non-convective Sigmets > >> > # > >> > WMO ^WSUS01 > >> > PIPE /lsw/wea/gempak/bin/linux/dcncon > >> > -d /var/wea/gempak/dcncon.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/ncon/YYYYMMDDHH_sgmt.gem > >> > # > >> > # Decoder for Convective Sigmets > >> > # > >> > WMO ^(WSUS4[0-2]|WCPA3[1-5]) > >> > PIPE /lsw/wea/gempak/bin/linux/dccsig > >> > -d /var/wea/gempak/dccsig.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/csig/YYYYMMDDHH.conv > >> > # > >> > # Decoder for TAFs > >> > # > >> > WMO ^FT > >> > PIPE /lsw/wea/gempak/bin/linux/dctaf > >> > -d /var/wea/gempak/dctaf.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/taf/YYYYMMDD00.taf > >> > # > >> > # Decoder for Regional Digital Forecasts > >> > # > >> > WMO ^FOUS5[1-5] > >> > PIPE /lsw/wea/gempak/bin/linux/dcrdf -v 4 > >> > -d /var/wea/gempak/dcrdf.log > >> > -e GEMTBL=/lsw/wea/gempak/gempak/tables > >> > gempak/rdf/YYYYMMDDHH.rdf > >> > # > >> > # Mcidas data file creation entries > >> > > >> > DDPLUS|IDS ^(F[COT]|S[ADIMNPSX]|TB|U[ABEFGJKLMPSX]) > >> > PIPE mcidata txt > >> > > >> > HRS ^.* > >> > PIPE mcidata hrs > >> > > >> > > >> > # Ldm-Mcidas data file creation entries > >> > > >> > MCIDAS ^pnga2area Q. (..) (.*) > >> > PIPE -close .lmbin/pnga2area -d mcidas/area > >> > -l /var/wea/mcidas/area.log > >> > -a .lmetc/SATANNOT -b .lmetc/SATBAND -r \1,\2 > >> > > >> > NLDN ^(.......)(....) > >> > PIPE -close .lmbin/nldn2md -d mcidas/area > >> > -l /var/wea/mcidas/nldn.log 71 NLDN DIALPROD=LD \1 \200 DEV=CCN > >> > > >> > FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.01hr\. > >> > PIPE -close .lmbin/proftomd -d mcidas/area > >> > -l /var/wea/mcidas/pro0.log U2 WPRO 81 > >> > > >> > FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.06min\. > >> > PIPE -close .lmbin/proftomd -d mcidas/area > >> > -l /var/wea/mcidas/pro6.log U6 WPR6 91 > >> > > >> > > >> > ### Radar products > >> > # > >> > > >> > WSI ^NEX/([^/]+)/([^/]+)/(............) > >> > FILE -close nexradw/\1/\2/\3.wsi > >> > # > >> > NNEXRAD ^SDUS5. [^ ]+ (..)(....) /p(...)(...) > >> > FILE -close nexradn/\4/\3/(\1:yyyy)(\1:mm)\1\2.nws > >> > NNEXRAD ^SDUS7. [^ ]+ (..)(....) /p(...)(...) > >> > FILE -close nexradn/\4/\3/(\1:yyyy)(\1:mm)\1\2.nws > >> > NNEXRAD ^SDUS3. [^ ]+ (..)(....) /p(...)(...) > >> > FILE -close nexradn/\4/\3/(\1:yyyy)(\1:mm)\1\2.nws > >> > NNEXRAD ^SDUS2. [^ ]+ (..)(....) /p(...)(...) > >> > FILE -close nexradn/\4/\3/(\1:yyyy)(\1:mm)\1\2.nws > >> > # > >> > NEXRD2 ^L2-([^/]*)/(KTWX)/([0-9][0-9][0-9][0-9][0-1][0-9][0-3][0-9][0- > > 2][0-9][0-5][0-9][0-9][0-9]) > >> > FILE craft/cmp/\2/\3.bz2 > >> > NEXRD2 ^L2-([^/]*)/(KEAX)/([0-9][0-9][0-9][0-9][0-1][0-9][0-3][0-9][0- > > 2][0-9][0-5][0-9][0-9][0-9]) > >> > FILE craft/cmp/\2/\3.bz2 > >> > NEXRD2 ^L2-([^/]*)/(KICT)/([0-9][0-9][0-9][0-9][0-1][0-9][0-3][0-9][0- > > 2][0-9][0-5][0-9][0-9][0-9]) > >> > FILE craft/cmp/\2/\3.bz2 > >> > NEXRD2 ^L2-([^/]*)/(KGLD)/([0-9][0-9][0-9][0-9][0-1][0-9][0-3][0-9][0- > > 2][0-9][0-5][0-9][0-9][0-9]) > >> > FILE craft/cmp/\2/\3.bz2 > >> > NEXRD2 ^L2-([^/]*)/(KDDC)/([0-9][0-9][0-9][0-9][0-1][0-9][0-3][0-9][0- > > 2][0-9][0-5][0-9][0-9][0-9]) > >> > FILE craft/cmp/\2/\3.bz2 > >> > # > >> > # > >> > # > >> > # > >> > # > >> > # Do nothing to all products not listed above. > >> > # > >> > # ANY .* NOOP > >> > > >> > > >> > # > >> > # The format of each entry is: > >> > # > >> > # feedtype <TAB> pattern <TAB> action [ <TAB> args] > >> > # > >> > # where <TAB> is \t or \n\t. > >> > # > >> > # The action and action arguments allowed are: > >> > # > >> > # NOOP > >> > # Do nothing. > >> > # > >> > # FILE <TAB> [ -overwrite | -flush | -close | -strip ] filename > >> > # Nonbuffered write. Uses write(2) and fsync(2). > >> > # > >> > # STDIOFILE <TAB> [ -overwrite | -flush |-close | -strip ] filename > >> > # Buffered write. Uses fwrite(3) and fflush(3). > >> > # > >> > # DBFILE <TAB> dbfilename [ dbkey ] > >> > # Put to gdbmfile. > >> > # > >> > # PIPE <TAB> [ -close | -strip ] command [ args ] > >> > # Data is piped to command. If command is relative, PATH is used. > >> > # > >> > # EXEC <TAB> [ -wait ] command [ args ] > >> > # Exec the command. If command is relative, PATH is used. > >> > # > >> > # > >> > # To check the pqact.conf syntax: > >> > # pqact -vxl- -q /dev/null pqact.conf > >> > # > >> > > > > -- > **************************************************************************** < > Unidata User Support UCAR Unidata Program < > (303)497-8643 P.O. Box 3000 < > address@hidden Boulder, CO 80307 < > ---------------------------------------------------------------------------- < > Unidata WWW Service http://my.unidata.ucar.edu/content/support < > ---------------------------------------------------------------------------- < > NOTE: All email exchanges with Unidata User Support are recorded in the > Unidata inquiry tracking system and then made publicly available > through the web. If you do not want to have your interactions made > available in this way, you must let us know in each email you send to us. >