[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: missed GFS 1 degree data from CONDUIT

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: Re: missed GFS 1 degree data from CONDUIT
  • Date: Tue, 1 Aug 2006 14:30:42 -0500 (CDT)
>Jerry/Steve,
>
>Has it been primarily on the 06 UTC runs?  
>
>I just checked and all of my machines starting with f5 and the 
>others that pull the 1 deg gfs from f5 are short on many of
>the 06 UTC GFS files, as yours are. 
>
>That run is coming in around the same time that the backup software 
>runs on f5, maybe that is the culprit?  I'm going to change the time 
>of the backup run to try to better fit between gfs runs and see if that
>helps tonight.
>
>Also, did you lose data on the weekend (060730/31) when my backup job
>didn't run? If not, that is almost certainly the problem.
>
>Pete

Pete...

I have data on disk going back to 18Z on July 28th.  The only run that has
missing data is the 06Z run today.

        Kevin W. Thomas
        Center for Analysis and Prediction of Storms
        University of Oklahoma
        Norman, Oklahoma
        Email:  address@hidden