[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[McIDAS #IND-391015]: MCIDAS BATCH Files

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: [McIDAS #IND-391015]: MCIDAS BATCH Files
  • Date: Tue, 11 Jan 2011 14:46:32 -0700
Hi Paul,

re: output of various DMAP invocations

> > DMAP Frame
> PERM      SIZE LAST CHANGED FILENAME  DIRECTORY
> ---- --------- ------------ --------- ---------
> -rw-      3072 Jan 11 15:09 Frame1.0  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame10.0 /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame11.0 /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame12.0 /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame13.0 /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame14.0 /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame15.0 /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame16.0 /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame2.0  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame3.1  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame4.0  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame5.0  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame6.0  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame7.1  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame8.0  /home/mcidas/.mctmp/717520905
> -rw-      3072 Jan 11 15:07 Frame9.0  /home/mcidas/.mctmp/717520905
> 49152 bytes in 16 files

These are correct.

re:
> DMAP FRAMENH
> PERM      SIZE LAST CHANGED FILENAME    DIRECTORY
> ---- --------- ------------ ----------- ---------
> -r--      9792 Jan 11 15:14 FRAMENH.001 /home/mcidas/workdata
> 9792 bytes in 1 files

This is incorrect and may well be the cause of your problems.
The first thing to do before retrying your EU MAKE tests is
to delete this file.  Also, after rerunning your test(s), make
sure to see where this file resides.  Again, it should be in
the ~/.mctmp/nnnnn directory.

> DMAP GRAPHICS
> PERM      SIZE LAST CHANGED FILENAME      DIRECTORY
> ---- --------- ------------ ------------- ---------
> -rw-         4 Jan 11 15:07 GRAPHICS.KEY  /home/mcidas/.mctmp/717520905
> -rw-       919 Jul 15  2008 GRAPHICS.PROG /home/mcidas/data
> 923 bytes in 2 files


This is correct.

re:
> DMAP TERMCHAR
> PERM      SIZE LAST CHANGED FILENAME     DIRECTORY
> ---- --------- ------------ ------------ ---------
> -rw-     45056 Jan 11 15:10 TERMCHAR.001 /home/mcidas/workdata
> 45056 bytes in 1 files

This is also incorrect.  You need to delete this file also.

My suggestion is to:

- exit any/all McIDAS sessions that are running
- delete ~mcidas/workdata/FRAMENH.001 and ~mcidas/workdata/TERMCHAR.001
- restart your session
- rerun the DMAP commands immediately to verify that these files were
  not recreated in the wrong (i.e., ~mcidas/workdata) directory. If
  they are, then there is something wrong in your environment... please
  send the output of 'env' (the output of the 'env' command from the McIDAS
  Text and Command window is gotten by typing !env).

re:
> I am also getting the same results running a batch file:

I think the problem is the FRAMENH.001 and TERMCHAR.001 files which
are located in your ~mcidas/workdata directory.  Please delete these as
I have indicated above and rerun your tests.

re:
> I run this file in and out of the mcidas session (in mcidas and with a
> kickoff batchfile process.)

I suspect that there is something not quite right in the setting of MCPATH
in your kickoff process.

re:
> When I type EU TABLE TESTVAPOR I get the same wierd colors I sent you
> before.

This is completely weird.  EU TABLE should only list the contents of
the enhancement table TESTVAPOR.  Again, I suspect the problem is being
caused by FRAMENH.001 and TERMCHAR.001 being in the wrong directory.

re:
> When I reset an image and just say EU REST IMAGE then I start each line,
> the first line works. It is the subsequent line that messes everything
> else up. This is part of the reason I was not catching on too quickly!

My comments above apply.

Cheers,

Tom
--
****************************************************************************
Unidata User Support                                    UCAR Unidata Program
(303) 497-8642                                                 P.O. Box 3000
address@hidden                                   Boulder, CO 80307
----------------------------------------------------------------------------
Unidata HomePage                       http://www.unidata.ucar.edu
****************************************************************************


Ticket Details
===================
Ticket ID: IND-391015
Department: Support McIDAS
Priority: Normal
Status: Closed