[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20030925: 20030925: McIDAS-X setup after disk failure

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: 20030925: 20030925: McIDAS-X setup after disk failure
  • Date: Thu, 25 Sep 2003 16:24:56 -0600
>From: Eirh-Yu Hsie <address@hidden>
>Organization: Aeronomy Laboratory/NOAA
>Keywords: 200309251800.h8PI0ik1022320 McIDAS-X v2003 install

Hsie,

>I only do the above steps.  The redirect is fine.  The ADDE prodects 
>seemd intact.

OK.

>blizzard:[43]% decinfo.k LIST
>
>Processing Data Monitor: DMSFC        is active
>=========================================================================
>Decoder       Status      Configuration File
>----------------------------------------------------------------------
>SAODEC        Active      ISFCDEC.CFG
>
>
>Processing Data Monitor: DMRAOB       is active
>=========================================================================
>Decoder       Status      Configuration File
>----------------------------------------------------------------------
>RABDEC        Active      IRABDEC.CFG
>
>
>Processing Data Monitor: DMSYN        is active
>=========================================================================
>Decoder       Status      Configuration File
>----------------------------------------------------------------------
>SYNDEC        Active      SYNDEC.CFG
>----------------------------------------------------------------------
>SHPDEC        Active      ISHPDEC.CFG
>
>
>Processing Data Monitor: DMMISC       is active
>=========================================================================
>Decoder       Status      Configuration File
>----------------------------------------------------------------------
>F14DEC        Active      FO14DEC.CFG
>----------------------------------------------------------------------
>PIRDEC        Active      PIRPDEC.CFG
>----------------------------------------------------------------------
>TERDEC        Active      TERMDEC.CFG
>----------------------------------------------------------------------
>TIRDEC        Inactive    TIRDEC.CFG
>----------------------------------------------------------------------
>MDRDEC        Inactive    MDRDEC.CFG
>
>
>Processing Data Monitor: DMGRID       is active
>=========================================================================
>Decoder       Status      Configuration File
>----------------------------------------------------------------------
>GRIB          Active      GRIBDEC.CFG
>
>
>Processing Data Monitor: DMNEXR       is inactive
>=========================================================================
>Decoder       Status      Configuration File
>----------------------------------------------------------------------
>NEXRFILE      Active      NEXRFILE.CFG
>
>
>Processing Data Monitor: DMBIN        is inactive
>=========================================================================
>Decoder       Status      Configuration File
>----------------------------------------------------------------------
>GRBFILER      Active      GRBFILER.CFG
>
>decinfo.k: Done

This looks good.

>The are the same on both servers (rainbow:linux, blizzard:solaris).  But 
>when I compare their data directories, I still missing some files in 
>blizzard:
>
>rainbow:[42]% ls -l *RAP
>-rw-rw-r--    1 mcidas   unidata    142596 Sep 25 08:06 FOUS14.RAP
>-rw-rw-r--    1 mcidas   unidata   4978692 Sep 25 15:54 RAOB.RAP
>-rw-rw-r--    1 mcidas   unidata  37680772 Sep 25 15:57 SAOMETAR.RAP
>-rw-rw-r--    1 mcidas   unidata   6896772 Sep 25 15:52 SYNOPTIC.RAP
>-rw-rw-r--    1 mcidas   unidata   4896388 Sep 25 15:57 TERMFCST.RAP
>rainbow:[43]% ls -l *RAT
>-rw-rw-r--    1 ldm      unidata  50331300 Sep 25 08:06 FOUS14.RAT
>-rw-rw-r--    1 ldm      unidata  50331460 Sep 25 15:54 RAOB.RAT
>-rw-rw-r--    1 ldm      unidata  50331460 Sep 25 15:57 SAOMETAR.RAT
>-rw-rw-r--    1 ldm      unidata  50331460 Sep 25 15:52 SYNOPTIC.RAT
>-rw-rw-r--    1 ldm      unidata  50331460 Sep 25 15:57 TERMFCST.RAT

So, you are saying that blizzard does not have either the *.RAP or
*.RAT files?  The *.RAP files should be created by the 
'batch XCDDEC.BAT' step in the procedure I sent you previously.
The *.RAT files get created by the XCD decoders.

Do you want me to login and take a look at blizzard?

Tom
**************************************************************************** <
Unidata User Support                                    UCAR Unidata Program <
(303)497-8643                                                  P.O. Box 3000 <
address@hidden                                   Boulder, CO 80307 <
---------------------------------------------------------------------------- <
Unidata WWW Service              http://my.unidata.ucar.edu/content/support  <
**************************************************************************** <