[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20030122: HU-LDM

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: 20030122: HU-LDM
  • Date: Wed, 22 Jan 2003 10:09:54 -0700 (MST)
Pavel, 

If that is what you are considering just place a:

request UNIDATA ".*" atm.phys.nsf.gov

The only difference between what you have indicated a desire for and what
I have above is that my request will also include sat imagery. If you do
not want sat imagery i would suggest:

request HDS ".*" atm.phys.nsf.gov
request PPS ".*" atm.phys.nsf.gov

etc...

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
COMET Case Study Library                      FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On 22 Jan 2003, Pavel Byles wrote:

> Jeff,
> the \ infront is a copy paste error those were actually tabs, not \'s.
> No that is not all I need from the UNIDATA feed. I want the whole
> UNIDATA feed. I was experimenting with just one.
> So should I put:
> 
> request UNIDATA "/p...(HDS|PPS|DDS|IDS)" atm.phys.nsf.gov
> 
> Pavel
> 
> On Tue, 2003-01-21 at 17:24, Jeff Weber wrote:
> > Pavel, 
> > 
> > request NNEXRAD "/p...(ABC|XYZ)" your.nexrad.feed
> >                           
> > is how your NNEXRAD entry should read (of course swapping ABC|XYZ with
> > your stations)
> > 
> > the \ in front of the quotes is a mystery to me, is there a reason you
> > have it there, I cannot think of one.
> > 
> > Still not sure what you are trying to get with:
> > 
> >  request UNIDATA \"/p...(HDS)\" atm.geo.nsf.gov
> > 
> > why not try
> > 
> > request HDS ".*" atm.geo.nsf.gov
> > 
> > 
> > Keep in mind, you must stop and start the LDM for any changes in your
> > ldmd.conf to take place..you can:
> > 
> > ldmadmin pqactHUP 
> > 
> > to activate the changes in pqact.conf
> > 
> > Cheers,
> > 
> > -Jeff
> > ____________________________                  _____________________
> > Jeff Weber                                    address@hidden
> > Unidata Support                               PH:303-497-8676 
> > COMET Case Study Library                      FX:303-497-8690
> > University Corp for Atmospheric Research      3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > ________________________________________      ______________________
> > 
> > On Tue, 21 Jan 2003, Byles, Pavel O wrote:
> > 
> > > Jeff,
> > > this is what's in the ldmd.conf.
> > > 
> > > request NNEXRAD \"/p...(LWX|DOX|AKQ)\" atm.geo.nsf.gov 
> > > request UNIDATA \"/p...(HDS)\" atm.geo.nsf.gov
> > > 
> > > Since in the pqact.conf I am expecting HDS data does it matter that the
> > > ldmd.conf file says UNIDATA but still requests HDS?
> > > 
> > > Thanks much,
> > > Pavel
> > > 
> 
> 
>