RE: 20020702: HU - upper air data

Hi Pavel, 

Ok, that sheds some light on the situation...we do maintain NSF's machine,
so that would make sense. I am guessing it was Tom Yoksas who helped you.

Your NEXRAD is fine, but:

 On Tue, 16 Jul 2002, Pavel Byles-Howard University Engineering wrote:
> 
> > I will proceed by putting a request for FSL2 in my ldmd.conf:
> > request FLS2 "/p...(DDS|IDS)" atm.geo.nsf.gov


will not!

FSL2 is a different feed than DDS or IDS, so requesting FSL2 with a
DDS|IDS action will return nothing. I will place an allow UNIDATA on
atm.geo.nsf.gov

Then request UNIDATA ".*" from atm.

I will attempt to get on atm and make the change.

Your pqact.conf entry appears OK:

> then in my pqact.conf file I will append this to the entry:
> > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> 
> >          PIPE    decoders/dcuair -b 24 -m 16
> 
> >          -d data/pub/decoded/gempak/logs/dcuair.log
> 
> >          -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> 
> >          -s snstns.tbl
>
> >          data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem


But I believe this will capture ALL the reports so keep an eye on your
queue..or restrict the action...


I will notify you as soon as I have the allow on atm for you..


If you also want the profiler data (FSL2) we go point to point with that
from FSL and i will give you the contact, but I think you really want
upperair obs..not profiler data, but just guessing.

Thank you,

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
NWS-COMET Case Study Library                  FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Tue, 16 Jul 2002, Byles, Pavel O wrote:

> While you were on vacation or something another tech support rep intercepted
> our  messages and was helping me in the meanwhile. He suggested that I use
> that one instead of snow because he wasn't sure if snow was allowing me to
> get the data that I wanted.
> 
> No I am not getting DDS|IDS data only nexrad data right now. That's all
> that's enabled in my ldmd.conf and pqact.conf files.
> 
> The lines from my ldmd.conf file has this
> #request NNEXRAD "/p...(LWX|DOX|AKQ)" snow.nrcc.cornell.edu
> request NNEXRAD "/p...(LWX|DOX|AKQ)" atm.geo.nsf.gov
> Why wouldn't that work?
> 
> Pavel.
> -----Original Message-----
> From: Jeff Weber
> To: Pavel Byles-Howard University Engineering
> Cc: ldm-support
> Sent: 7/16/02 11:07 AM
> Subject: Re: 20020702: HU - 
> upper air data
> 
> Pavel, 
> 
> That will not work...
> 
> As I mentioned earlier, FSL2 is the profiler data, upper air data is in
> the DDS|IDS data stream...
> 
> I suspect you are already getting DDS|IDS with your UNIDATA request, but
> you may have changed that.
> 
> Why are you requesting from  atm.geo.nsf.gov ? Is snow not still your
> feed?
> 
> Please update.
> 
> Thank you,
> 
> 
> -Jeff
> ____________________________                  _____________________
> Jeff Weber                                    address@hidden
> Unidata Support                               PH:303-497-8676 
> NWS-COMET Case Study Library                  FX:303-497-8690
> University Corp for Atmospheric Research      3300 Mitchell Ln
> http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> ________________________________________      ______________________
> 
> On Tue, 16 Jul 2002, Pavel Byles-Howard University Engineering wrote:
> 
> > I will proceed by putting a request for FSL2 in my ldmd.conf:
> > request FLS2 "/p...(DDS|IDS)" atm.geo.nsf.gov
> > 
> > then in my pqact.conf file I will append this to the entry:
> > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> 
> >          PIPE    decoders/dcuair -b 24 -m 16
> 
> >          -d data/pub/decoded/gempak/logs/dcuair.log
> 
> >          -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> 
> >          -s snstns.tbl
> 
> >          data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > 
> > 
> > Pavel Byles
> > 
> > On Mon, 15 Jul 2002, Jeff Weber wrote:
> > 
> > > Hi Pavel, 
> > > 
> > > The upper air reports are in the DDS|IDS...or DDPLUS...or UNIDATA
> > > feedtypes or feedgroups..DDPLUS includes DDS|IDS and UNIDATA
> includes
> > > others..
> > > 
> > > 
> > > Here is a sample entry from our pqact.conf..
> > > 
> > > #
> > > # upper air reports
> > > #
> > > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> > >         PIPE    decoders/dcuair -b 24 -m 16
> > >         -d data/pub/decoded/gempak/logs/dcuair.log
> > >         -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > >         -s snstns.tbl
> > >         data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > > 
> > > 
> > > see:
> > > 
> > > http://unidata.ucar.edu/packages/ldm/feedtypes/index.html
> > > 
> > > Profiler data is on FSL2
> > > 
> > > 
> > > Let me know how you want to proceed.
> > > 
> > > Thank you,
> > > 
> > > -Jeff
> > > ____________________________                  _____________________
> > > Jeff Weber                                    address@hidden
> > > Unidata Support                               PH:303-497-8676 
> > > NWS-COMET Case Study Library                  FX:303-497-8690
> > > University Corp for Atmospheric Research      3300 Mitchell Ln
> > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > > ________________________________________      ______________________
> > > 
> > > On Thu, 11 Jul 2002, Unidata Support wrote:
> > > 
> > > > 
> > > > ------- Forwarded Message
> > > > 
> > > > >To: Unidata Support <address@hidden>
> > > > >From: Pavel Byles-Howard University Engineering
> <address@hidden>
> > > > >Subject: Re: 20020701: 20020628: 20020627: 20020626: LDM setup at
> Howard (cont.) 
> > > > >Organization: UCAR/Unidata
> > > > >Keywords: 200207021955.g62JtDu21542
> > > > 
> > > > How do I recieve upper air data? ie. what's the package name for
> it?
> > > > 
> > > > -- 
> > > > Pavel Byles
> > > > Sent using Pine ver. 4.4
> > > > on RedHat Linux 7.3
> > > > http://138.238.177.230
> > > > 
> > > > 
> > > > ------- End of Forwarded Message
> > > > 
> > > > 
> > > 
> > 
> > -- 
> > Pavel Byles
> > Sent using Pine ver. 4.4
> > on RedHat Linux 7.3
> > http://138.238.177.230
> > 
> > 
>