[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: LDM/CRAFT distribution

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: Re: LDM/CRAFT distribution
  • Date: Thu, 27 Sep 2001 16:32:15 -0600 (MDT)
Hi Alan, 

I am a bit confused by your message.

Firstly, allow and request are the standard semantics for the LDM.
Secondly, I am not operating an LDM, but can if needed. I was hoping you
may allow Warren the data and not pass it to your archive if that is what
is causing the problems. I hear you are getting RECLASS statements from
OU. Can you snip the tail(or relevant section) of your log file, that
hopefully includes these RECLASS errors. We should be able to help solve
this issue and then hopefully you can continue your feed to OU...

Thank you,

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
NWS-COMET Case Study Library                  FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Thu, 27 Sep 2001, Alan Hall wrote:

> Jeff,
> 
> I can't remember if I sent you the info you needed, so incase I did not, here
> it is again:
> 
> In your ldmd.conf file you need an entry something like:
>  #Raleigh
>  accept  NEXRD2  .KRAX   ^205\.167\.25.171$
>  #Columbia
>  accept  NEXRD2  .KCAE   ^205\.167\.25.171$
>  #Wilmington
>  accept  NEXRD2  .KLTX   ^205\.167\.25.171$
>  #Wakefield
>  accept  NEXRD2  .KAKQ   ^205\.167\.25.171$
>  #Morehead City
>  accept  NEXRD2  .KMHX   ^205\.167\.25.171$
>  #Charleston
>  accept  NEXRD2  .KRLX   ^205\.167\.25.171$
> 
> Re-cycle your LDM and let me know and I will add the "send" to my ldmd.conf so
> Warren can start receiving the data.
> 
> Alan.
> 
> Jeff Weber wrote:
> 
> > Hello Steve and Alan,
> >
> > Glenn Rutledge passed your names to me as points of contact for this
> > project.
> >
> > I was hoping to begin feeding the CRAFT Level II Radar data to
> > Warren Blanchard at NWS/OST/SEC.
> >
> > Below you will find the information needed to include in your ldmd.conf
> > file to allow a feed to 140.90.23.110 for the feedtype: NEXRD2
> >
> > A full listing of the feedtypes can be found at:
> > http://unidata.ucar.edu/packages/ldm/feedtypes/index.html
> >
> > Could you also please inform myself and Warren the name and IP of the
> > machine your LDM is running on so he can point his request to the proper
> > location.
> >
> > Thank you for your cooperation, this will be a great leap in weather radar
> > science.
> >
> > Site Name:    NWS/OST/SEC
> >
> > Site Administrator:    Warren Blanchard W/OST32
> >
> > Email Address:    address@hidden
> >
> > Phone Number:    301.713.1570 x130
> >
> > Fully Qualified Hostname of the IDD Node:     140.90.23.110
> > ***No assigned DNS name.
> > The address is within nws.noaa.gov.
> >
> > -Jeff
> > ____________________________                  _____________________
> > Jeff Weber                                    address@hidden
> > Unidata Support                               PH:303-497-8676
> > NWS-COMET Case Study Library                  FX:303-497-8690
> > University Corp for Atmospheric Research      3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > ________________________________________      ______________________
>