[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 19991214: ldm installation at CCNY
- Subject: Re: 19991214: ldm installation at CCNY
- Date: Tue, 21 Dec 1999 11:40:22 -0700 (MST)
On Tue, 21 Dec 1999, Ka Kit Lai wrote:
> I did run the scriptconfig inside ~ldm/(new-version)/bin, but it didnt
> convert the ldmadmin.in to ldmadmin. The following messages was displayed
> after I run the scriptconfig:
> Check that the following defines are correct:
>
> perl is located at: /usr/bin/perl
>
> $LDMHOME is defined as /export/home/staff
>
> Fully qualified hostname needed, halo not fully qualified.
> edit scriptconfig to manually set $HOST variable
>
> Do I need to make any modification to the scriptconfig first? What will be
> the cause of the problem?
Hiya,
Yes, edit script config, change:
HOST="definehere"
to
HOST="Your fully qualified host name"
I mean your full machine name there, then run scriptconfig again.
Robb...
>
>
> >From: Robb Kambic <address@hidden>
> >To: Ka Kit Lai <address@hidden>
> >CC: support-ldm <address@hidden>
> >Subject: Re: 19991214: ldm installation at CCNY
> >Date: Tue, 21 Dec 1999 10:26:19 -0700 (MST)
> >
> >On Tue, 21 Dec 1999, Ka Kit Lai wrote:
> >
> > > I couldn't find the ldmadmin inside my ~ldm/bin, I only found the file
> > > ldmadmin.in, did I do anything wrong during the binary installation?
> >Should
> > > I redo the installation?
> >
> >Hiya,
> >
> >The Binary installation instruction are at:
> >
> >http://www.unidata.ucar.edu/packages/ldm/ldmBinaryInstallList.html
> >
> >
> >The 3rd step "Run the scriptconfig script" converts the .in files to the
> >correct files. I would redo the Binary installation again.
> >
> >Robb...
> >
> > >
> > > Ka Kit Lai
> > >
> > >
> > > >From: Robb Kambic <address@hidden>
> > > >To: Ka Kit Lai <address@hidden>
> > > >CC: support-ldm <address@hidden>
> > > >Subject: Re: 19991214: ldm installation at CCNY
> > > >Date: Fri, 17 Dec 1999 10:46:57 -0700 (MST)
> > > >
> > > >On Fri, 17 Dec 1999, Ka Kit Lai wrote:
> > > >
> > > > > I couldnt find the ldmadmin inside the ~ldm/new_version/bin, So how
> >can
> > > >I
> > > > > remake the queue with the new version?
> > > > >
> > > >Hiya,
> > > >
> > > >Then you did something wrong in the binary installation. Also note
> >that
> > > >the {new version} is just a place holder for the release name, the
> >latest
> > > >release is ldm-5.0.8, so look for the ldm-5.0.8 directory/bin for the
> > > >ldmadmin script.
> > > >
> > > >Robb...
> > > >
> > > >
> > > >
> > > > >
> > > > > >From: Robb Kambic <address@hidden>
> > > > > >To: Ka Kit Lai <address@hidden>
> > > > > >CC: support-ldm <address@hidden>
> > > > > >Subject: Re: 19991214: ldm installation at CCNY
> > > > > >Date: Thu, 16 Dec 1999 14:48:21 -0700 (MST)
> > > > > >
> > > > > >On Thu, 16 Dec 1999, Ka Kit Lai wrote:
> > > > > >
> > > > > >
> > > > > > > you mentioned that I shuold remake the ldm by queue:
> > > > > >
> > > > > >stop the ldm with the old version and remake the queue with the new
> > > > > >version.
> > > > > >
> > > > > >
> > > > > > > > > >% ldmadmin delqueue
> > > > > > > > > >% ldmadmin mkqueue
> > > > > > > > > >% ldmadmin start
> > > > > > > should I execute the ldmadmin in my old version ldm
> > > > > > > ~ldm/(old_version)/bin/ldmadmin
> > > > > > >
> > > > > > > If I finished the above process and restart the LDM, what else
> >do I
> > > >need
> > > > > >to
> > > > > > > do to have the LDM connect with the Gempak? Thank you.
> > > > > >
> > > > > >Look at:
> > > > > >
> > > > >
> > > >
> > >http://www.unidata.ucar.edu/packages/gempak/GEMPAK5.4/configuration.html
> > > > > >
> > > > > >to configure the LDM for gempak.
> > > > > >
> > > > > >Robb...
> > > > > >
> > > > > >
> > > > > > >
> > > > > > > >From: Robb Kambic <address@hidden>
> > > > > > > >To: Ka Kit Lai <address@hidden>
> > > > > > > >CC: support-ldm <address@hidden>
> > > > > > > >Subject: Re: 19991214: ldm installation at CCNY
> > > > > > > >Date: Thu, 16 Dec 1999 11:21:22 -0700 (MST)
> > > > > > > >
> > > > > > > >
> > > > > > > >On Thu, 16 Dec 1999, Ka Kit Lai wrote:
> > > > > > > >
> > > > > > > > > But I already have a ldm-5.0.5 installed in my machine, do I
> > > >need to
> > > > > > > >remove
> > > > > > > > > that first before I install the 5.08? If yes, how do I
> >remove
> > > >that?
> > > > > > > > >
> > > > > > > >Hiya,
> > > > > > > >
> > > > > > > >If your machine is configured according to the preinstall
> > > >instructions,
> > > > > > > >then all you do is get the binary distribution according to the
> > > >binary
> > > > > > > >install instructions. No, one does not have to remove the
> >previous
> > > > > > > >release to install a new release.
> > > > > > > >
> > > > > > > >Robb..
> > > > > > > > >
> > > > > > > > > >From: Robb Kambic <address@hidden>
> > > > > > > > > >To: Ka Kit Lai <address@hidden>
> > > > > > > > > >CC: support-ldm <address@hidden>
> > > > > > > > > >Subject: Re: 19991214: ldm installation at CCNY
> > > > > > > > > >Date: Thu, 16 Dec 1999 10:38:30 -0700 (MST)
> > > > > > > > > >
> > > > > > > > > >On Thu, 16 Dec 1999, Ka Kit Lai wrote:
> > > > > > > > > >
> > > > > > > > > > > Hi, Robb. I think I already have the LDM installed in
> > > > > > > >/usr/local/ldm. I
> > > > > > > > > >read
> > > > > > > > > > > the binary installation, do I still need to get the
> > > >ldm.tar.Z?
> > > > > > > > > >
> > > > > > > > > >Hiya,
> > > > > > > > > >
> > > > > > > > > >Yes, get the latest LDM release and install it. Follow the
> > > >binary
> > > > > > > >install
> > > > > > > > > >directions.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > After that, do I need to stop the ldm and change the
> > > >run-time
> > > > > >link?
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Yes stop the LDM, change the runtime link. I would also,
> > > >remake
> > > > > >the
> > > > > > > >LDM
> > > > > > > > > >queue.
> > > > > > > > > >
> > > > > > > > > >% ldmadmin delqueue
> > > > > > > > > >% ldmadmin mkqueue
> > > > > > > > > >% ldmadmin start
> > > > > > > > > >
> > > > > > > > > >Robb...
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > Ka Kit Lai
> > > > > > > > > > >
> > > > > > > > > > > >From: Robb Kambic <address@hidden>
> > > > > > > > > > > >To: Ka Kit Lai <address@hidden>
> > > > > > > > > > > >CC: support-ldm <address@hidden>
> > > > > > > > > > > >Subject: Re: 19991214: ldm installation at CCNY
> > > > > > > > > > > >Date: Tue, 14 Dec 1999 13:21:06 -0700 (MST)
> > > > > > > > > > > >
> > > > > > > > > > > >On Tue, 14 Dec 1999, Unidata Support wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > ------- Forwarded Message
> > > > > > > > > > > > >
> > > > > > > > > > > > > >To: address@hidden
> > > > > > > > > > > > > >From: "Ka Kit Lai" <address@hidden>
> > > > > > > > > > > > > >Subject: LDM
> > > > > > > > > > > > > >Organization: .
> > > > > > > > > > > > > >Keywords: 199912141709.KAA04279
> > > > > > > > > > > > >
> > > > > > > > > > > > > Hi, steve. This is Ka Kit. Last week I sent you a
> >mail
> > > > > >regarding
> > > > > > > >how
> > > > > > > > > >to
> > > > > > > > > > > > > connect the Gempak to the LDM, and one of your
> >technical
> > > > > >support
> > > > > > > > > >called
> > > > > > > > > > > >Don
> > > > > > > > > > > > > Murray reply me and he provided me a lot of help.
> >But
> > > >now
> > > > > >the
> > > > > > > > > >scenario
> > > > > > > > > > > >is
> > > > > > > > > > > > > the LDM was already installed in my Solaris machine
> >last
> > > > > >year,
> > > > > > > >but
> > > > > > > > > >last
> > > > > > > > > > > > > spring the solaris machine was upgrade from an older
> > > >version
> > > > > > > >(not
> > > > > > > > > >sure
> > > > > > > > > > > >what
> > > > > > > > > > > > > exactly the version is) to Solaris 2.7. During those
> > > >time
> > > > > >frame,
> > > > > > > >the
> > > > > > > > > >LDM
> > > > > > > > > > > > > stop working. Now my question is should I reinstall
> >the
> > > >LDM
> > > > > >or I
> > > > > > > > > >need to
> > > > > > > > > > > > > make some change to the LDM. One more problem is the
> >LDM
> > > >was
> > > > > >not
> > > > > > > > > > > >installed
> > > > > > > > > > > > > by me and I am not sure where it is located in the
> > > >solaris
> > > > > > > >machine.
> > > > > > > > > >How
> > > > > > > > > > > >can
> > > > > > > > > > > > > I figure out where it is installed and how to
> >uninstall
> > > >it?
> > > > > >If
> > > > > > > >it is
> > > > > > > > > > > > > necessary, I can give you the access permission to
> >my
> > > > > >solaris
> > > > > > > > > >machine
> > > > > > > > > > > >and
> > > > > > > > > > > > > check out for the LDM. Thank you very much.
> > > > > > > > > > > >
> > > > > > > > > > > >Hiya,
> > > > > > > > > > > >
> > > > > > > > > > > >The ldm is usually install in dir:
> > > > > > > > > > > >
> > > > > > > > > > > >/usr/local/ldm
> > > > > > > > > > > >
> > > > > > > > > > > >I would start over by doing the preInstall instruction
> >on
> > > >the
> > > > > >LDM
> > > > > > > >home
> > > > > > > > > > > >page , then the Binary install instructions. Then the
> >LDM
> > > > > > > > > >configuration
> > > > > > > > > > > >would be standard and LDM upgrade will be a cinch. The
> >LDM
> > > > > > > > > >configuration
> > > > > > > > > > > >might already be in place, so all you would have to do
> >is
> > > >the
> > > > > > > >Binary
> > > > > > > > > > > >Install.
> > > > > > > > > > > >
> > > > > > > > > > > >The LDM home page is at:
> > > > > > > > > > > >
> > > > > > > > > > > >www.unidata.ucar.edu/packages/ldm
> > > > > > > > > > > >
> > > > > > > > > > > >Robb...
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > Ka Kit
> >Lai
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > ------- End of Forwarded Message
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > >===============================================================================
> > > > > > > > > > > >Robb Kambic Unidata
> > > > > > > > > > > >Program Center
> > > > > > > > > > > >Software Engineer III Univ. Corp
> > > > > > > > > > > >for Atmospheric
> > > >Research
> > > > > > > > > > > >address@hidden WWW:
> > > >http://www.unidata.ucar.edu/
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > >===============================================================================
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > ______________________________________________________
> > > > > > > > > > > Get Your Private, Free Email at http://www.hotmail.com
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > >===============================================================================
> > > > > > > > > >Robb Kambic Unidata Program
> > > > > > > > > >Center
> > > > > > > > > >Software Engineer III Univ. Corp
> > > > > > > > > >for Atmospheric
> >Research
> > > > > > > > > >address@hidden WWW:
> >http://www.unidata.ucar.edu/
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > >===============================================================================
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > ______________________________________________________
> > > > > > > > > Get Your Private, Free Email at http://www.hotmail.com
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > >
> > >===============================================================================
> > > > > > > >Robb Kambic Unidata Program
> > > > > > > >Center
> > > > > > > >Software Engineer III Univ. Corp for
> > > > > > > >Atmospheric Research
> > > > > > > >address@hidden WWW: http://www.unidata.ucar.edu/
> > > > > > >
> > > > > >
> > > >
> > >===============================================================================
> > > > > > > >
> > > > > > >
> > > > > > > ______________________________________________________
> > > > > > > Get Your Private, Free Email at http://www.hotmail.com
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >===============================================================================
> > > > > >Robb Kambic Unidata Program Center
> > > > > >Software Engineer III Univ. Corp for
> > > > > >Atmospheric Research
> > > > > >address@hidden WWW: http://www.unidata.ucar.edu/
> > > > >
> > > >
> > >===============================================================================
> > > > > >
> > > > >
> > > > > ______________________________________________________
> > > > > Get Your Private, Free Email at http://www.hotmail.com
> > > > >
> > > >
> > >
> > >===============================================================================
> > > >Robb Kambic Unidata Program Center
> > > >Software Engineer III Univ. Corp for Atmospheric
> > > >Research
> > > >address@hidden WWW: http://www.unidata.ucar.edu/
> > >
> > >===============================================================================
> > > >
> > >
> > > ______________________________________________________
> > > Get Your Private, Free Email at http://www.hotmail.com
> > >
> >
> >===============================================================================
> >Robb Kambic Unidata Program Center
> >Software Engineer III Univ. Corp for Atmospheric
> >Research
> >address@hidden WWW: http://www.unidata.ucar.edu/
> >===============================================================================
> >
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
===============================================================================
Robb Kambic Unidata Program Center
Software Engineer III Univ. Corp for Atmospheric Research
address@hidden WWW: http://www.unidata.ucar.edu/
===============================================================================