[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IDV #VVP-137794]: Point data display question



> I prefer the NaN solution if you think it'll work.
> 

Yes, it will work if you put two points at start and end of the gap.

Yuan
> -----Original Message-----
> From: Unidata IDV Support <address@hidden>
> Sent: Thursday, September 19, 2019 11:29 AM
> To: Adam Houston <address@hidden>
> Cc: address@hidden
> Subject: [IDV #VVP-137794]: Point data display question
> 
> > > That's "plan B" but I'd prefer to find a solution that allows that data 
> > > to be loaded via a single file.  What if I include records in the file 
> > > within the gap but include "NaN" for the lat/lon?  I could code that up 
> > > pretty easily but before I do, any thoughts on its likelihood for success?
> > >
> > > - Adam
> >
> > My plan "c" is to use the filters, you can set the Altitude > 440, assuming 
> > the 440 is the ground level.
> >
> > Yuan
> 
> The same idea is to set the altitude to a small or negative number at the 
> start and end of the gap, and it should work.
> 
> Yuan
> > >
> > >
> > > -----Original Message-----
> > > From: Unidata IDV Support <address@hidden>
> > > Sent: Thursday, September 19, 2019 11:18 AM
> > > To: Adam Houston <address@hidden>
> > > Cc: address@hidden
> > > Subject: [IDV #VVP-137794]: Point data display question
> > >
> > > > Thanks, Yuan.  I tried this (and several other variations in the 
> > > > animation widget) and nothing worked.  The RAAVEN position is still 
> > > > visualized in the gap and then at 23:30 jumps to its position at 00:48.
> > > >
> > > > - Adam
> > > >
> > >
> > > My other suggestion is to break up the RAAVEN position file into two 
> > > separate files, you still use the animation widget to define animate time 
> > > and RAAVEN position will not be showing within the gap.
> > >
> > > Yuan
> > > >
> > > > -----Original Message-----
> > > > From: Unidata IDV Support <address@hidden>
> > > > Sent: Wednesday, September 18, 2019 3:28 PM
> > > > To: Adam Houston <address@hidden>
> > > > Cc: address@hidden
> > > > Subject: [IDV #VVP-137794]: Point data display question
> > > >
> > > > > I'm displaying the positions of drones as "point data".  There are 
> > > > > gaps in the input data but the markers are still displayed in these 
> > > > > gaps.  For example, a drone lands at 22:13 and then takes off again 
> > > > > at 00:48 but the position of the drone is displayed until 23:30 at 
> > > > > its position at 22:13 and then at 23:31 moves to its position at 
> > > > > 00:48.  I'm displaying these data along with other point data files, 
> > > > > drawing files (with times), and radar data which is relevant because 
> > > > > when I just display the drone data, the times match the data times; 
> > > > > they skip from 22:13 to 00:48.  (I don't want this skip to happen in 
> > > > > the integrated visualization because there are other data from other 
> > > > > assets within the gap.)  I've tried using the drone data to "drive" 
> > > > > the times but this doesn't change anything.
> > > > >
> > > > > I've attached the drone data with gaps (*RAAVEN5*) and another data 
> > > > > set with data in the gap (*Probe1*).
> > > > >
> > > > > I'm running version 5.6 on a Windows machine.
> > > > >
> > > > > Thanks,
> > > > > Adam
> > > > >
> > > > > [https://ucomm.unl.edu/images/email-signature/Nebraska_N_RGB_sma
> > > > > ll_on_
> > > > > white.gif]
> > > > > Adam Houston
> > > > > Professor
> > > > > University of Nebraska-Lincoln
> > > > > Earth and Atmospheric Sciences UNL BESY 305C, UNL, 68588-0340
> > > > > 402-472-2416<tel:4024722416>
> > > > >
> > > > >
> > > > >
> > > > >
> > > > Hi Adam,
> > > >
> > > > You can use the time animation widget to set the animation time, 
> > > > attached is what I did according to the RAAVEN5. In this case, the 
> > > > other data within the gap can be display. I hope this is what you 
> > > > wanted, if not, let me know and we can work out something else.
> > > >
> > > >
> > > > Yuan
> > > >
> > > > Ticket Details
> > > > ===================
> > > > Ticket ID: VVP-137794
> > > > Department: Support IDV
> > > > Priority: Normal
> > > > Status: Open
> > > > ===================
> > > > NOTE: All email exchanges with Unidata User Support are recorded in the 
> > > > Unidata inquiry tracking system and then made publicly available 
> > > > through the web.  If you do not want to have your interactions made 
> > > > available in this way, you must let us know in each email you send to 
> > > > us.
> > > >
> > >
> > >
> > > Ticket Details
> > > ===================
> > > Ticket ID: VVP-137794
> > > Department: Support IDV
> > > Priority: Normal
> > > Status: Open
> > > ===================
> > > NOTE: All email exchanges with Unidata User Support are recorded in the 
> > > Unidata inquiry tracking system and then made publicly available through 
> > > the web.  If you do not want to have your interactions made available in 
> > > this way, you must let us know in each email you send to us.
> > >
> > >
> > >
> >
> 
> 
> Ticket Details
> ===================
> Ticket ID: VVP-137794
> Department: Support IDV
> Priority: Normal
> Status: Open
> ===================
> NOTE: All email exchanges with Unidata User Support are recorded in the 
> Unidata inquiry tracking system and then made publicly available through the 
> web.  If you do not want to have your interactions made available in this 
> way, you must let us know in each email you send to us.
> 
> 
> 


Ticket Details
===================
Ticket ID: VVP-137794
Department: Support IDV
Priority: Normal
Status: Open
===================
NOTE: All email exchanges with Unidata User Support are recorded in the Unidata 
inquiry tracking system and then made publicly available through the web.  If 
you do not want to have your interactions made available in this way, you must 
let us know in each email you send to us.