This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.
Hyun-Min, No worries. Glad to help. Actually this was a good case study for both of us. Best, Unidata IDV Support > Dear Unidata IDV Support, > > Thank you very much. This looks much closer to what I wanted. I may need to > spend more time to verify this not because of IDV problems, but because of my > clumsiness with IDV yet. Thanks again. > > Hyun-Min Shin > > -----Original Message----- > From: Unidata IDV Support [mailto:address@hidden] > Sent: Thursday, August 27, 2015 10:16 AM > To: Shin, Hyun-Min@DWR > Cc: address@hidden; address@hidden > Subject: [IDV #AJH-348949]: fole format for timeseries data > > Hyun-Min, > > Indeed, our second attempt did not handle a few things correctly, especially > time. Thankfully, I had a our resident netCDF expert, Russ Rew, help me out. > > Please see the attached new CDL file. Pay special attention to the Time > coordinate variable definition and values. I made a few assumptions that you > will need to verify (but the gist of it should be correct). > > Best, > > Unidata > > > Dear Unidata IDV Support, > > > > Thank you very much for your help. I am giving you updates on where I am > > FYI. > > 1) I was able to bring the netCDF file converted from what you sent into > > IDV. > > 2) I could see either some symbols at the locations or numeric values, > > though the verification is yet to be done. > > 3) The time variable may be also a factor I have to dig more - IDV shows > > times with increments in seconds against what I intended, which is hourly. > > > > I think I have to play around with IDV as you suggest to get what I exactly > > want. Thanks again. > > > > Best Regards, > > > > Hyun-Min Shin > > > > -----Original Message----- > > From: Unidata IDV Support [mailto:address@hidden] > > Sent: Tuesday, August 25, 2015 1:32 PM > > To: Shin, Hyun-Min@DWR > > Cc: address@hidden > > Subject: [IDV #AJH-348949]: fole format for timeseries data > > > > Hyun-Min, > > > > You won't know until you try. :-) > > > > But seriously, I went ahead and fixed the CDL file in question (see > > attached). > > > > You can open this file in the IDV and view it in the same manner as ADDE > > synoptic surface data. > > > > Please select a Data source Type of "netCDF/GEMPAK Point Data files". > > > > You may have to play around with the layout model to get something to > > your > > liking: > > > > https://www.unidata.ucar.edu/software/idv/docs/userguide/tools/Station > > ModelEditor.html > > > > Let us know if you run into trouble. > > > > Best, > > > > Unidata IDV Support > > > > > > > > > Dear Unidata Support, > > > > > > Thank you for your response. I may have to study much the information you > > > provided to solve the problem. > > > My intention is to have a display of temperature as shown in the > > > attached. The attached is displaying the ADDE synoptic surface data, not > > > the temperature I wanted. > > > My goal is to display the temperature time-series observed at 546 > > > stations in California. The 546 stations have fixed locations for a > > > certain period (not a specific time) of interest, although there are many > > > possible missing data from time to time. > > > I think that IDV can provide the display, but your confirmation on 'yes, > > > possible' or 'not' would be very helpful to me. I will look forward to > > > hearing from you. Thanks again. > > > > > > Best Regards, > > > > > > Hyun-Min Shin > > > > > > -----Original Message----- > > > From: Unidata IDV Support [mailto:address@hidden] > > > Sent: Tuesday, August 25, 2015 10:07 AM > > > To: Shin, Hyun-Min@DWR > > > Cc: address@hidden > > > Subject: [IDV #AJH-348949]: fole format for timeseries data > > > > > > Hyun-Min, > > > > > > You are on the right track, and kudos for describing the data with CF > > > conventions in mind, but unfortunately, things are little complicated > > > here. > > > > > > First off, a good model or exemplar for describing these data can be > > > found here: > > > > > > http://www.nodc.noaa.gov/data/formats/netcdf/v1.1/ > > > > > > and specifically > > > > > > http://data.nodc.noaa.gov/testdata/netCDFTemplateExamples/timeSeries > > > /B > > > odegaMarineLabBuoyCombined.cdl > > > > > > I think your CDL file strongly resembles this CDL example already, but > > > may be missing some important global attributes related to CF. > > > > > > At a minimum, I believe I would add: > > > > > > :featureType = "timeSeries" ; > > > :Conventions = "CF-1.6" ; > > > > > > and perhaps > > > > > > :Metadata_Conventions = "Unidata Dataset Discovery v1.0" ; > > > :nodc_template_version = > > > "NODC_NetCDF_TimeSeries_Orthogonal_Template_v1.0" ; > > > > > > Also ensure that your CDL file is following the conventions described in > > > BodegaMarineLabBuoyCombined.cdl. I believe that it is for the most part, > > > but please double-check (I just noticed that the dimensions and > > > dimensions associated w/ the variables needs to be better adhered to). > > > > > > On the IDV side what is your intention for the display? Unfortunately, > > > once we have fixed the problems with the data, I am not entirely sure the > > > IDV will render your data in the manner you want without some work on the > > > IDV. > > > > > > Best, > > > > > > Unidata IDV Support > > > > > > > Full Name: Hyun-Min Shin > > > > Email Address: address@hidden > > > > Organization: California Department of Water Resources Package > > > > Version: 5.1u2 Operating System: Windows 7 > > > > Hardware: Inter Xeon with 6GB memory Description of problem: I > > > > want to bring a time-series data into IDV. Attached are the CDL file > > > > and netCDF file (using ncgen) containing hourly temperature data for > > > > 546 stations in California for 10 hour-span. I failed to bring the data > > > > into IDV. Could you let me know if IDV can display time-series data for > > > > multiple stations (synoptic) from a local file? And if yes and my file > > > > has errors, what could be fix of the problems. Any response would be > > > > appreciated much. > > > > > > > > > > > > > > > > > Ticket Details > > > =================== > > > Ticket ID: AJH-348949 > > > Department: Support IDV > > > Priority: Normal > > > Status: Closed > > > > > > > > > > > > Ticket Details > > =================== > > Ticket ID: AJH-348949 > > Department: Support IDV > > Priority: Normal > > Status: Closed > > > > > Ticket Details > =================== > Ticket ID: AJH-348949 > Department: Support IDV > Priority: Normal > Status: Closed > Ticket Details =================== Ticket ID: AJH-348949 Department: Support IDV Priority: Normal Status: Closed