[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[IDV #OFE-561124]: Filtering
- Subject: [IDV #OFE-561124]: Filtering
- Date: Mon, 30 Mar 2015 11:06:14 -0600
Robbie,
I would encourage you to read the UNAVCO documentation for your most recent
concerns.
https://www.unavco.org/software/visualization/idv/IDV_for_GEON_howto.html
You may also wish to contact UNAVCO for additional questions.
Best,
Unidata IDV Support
> The beach balls that are used to plot the seismic events in the plugin. Do
> they actually plot weather the event is compression, dilation etc. or is
> there another parameter which I need to define within IDV for this to work.
> By define I mean outlining in the data entry window where you define
> altitude, time, magnitude etc.
>
> R
>
> On Mon, Mar 23, 2015 at 2:53 PM, robbie Eisenrich <address@hidden>
> wrote:
>
> > GOT ITTT!!!
> > thank you!!
> >
> > On Mon, Mar 23, 2015 at 10:04 AM, robbie Eisenrich <address@hidden
> > > wrote:
> >
> >> That helped greatly! Thank you
> >>
> >> I noticed you did not declutter and show multiple times steps which is
> >> mentioned in the instructions on this web page
> >> http://www.unavco.org/software/visualization/idv/UNAVCO_IDV_datasource_eqs.html#fa
> >>
> >> For my research I need to view multiple time steps. When applying the
> >> filter to multiple time steps I receive an error message.
> >>
> >> Is it possible to filter while viewing multiple time steps?
> >>
> >> Thank you
> >> Robbie
> >>
> >> address@hidden> wrote:
> >>
> >>> Robbie,
> >>>
> >>> I put together this video for you here:
> >>>
> >>>
> >>> https://www.youtube.com/watch?v=22TWdFunK3E&index=16&list=PLQut5OXpV-0gqVk8LFD6Riv6X3QcAVw_U
> >>>
> >>> and also here:
> >>>
> >>>
> >>> http://motherlode.ucar.edu/repository/entry/show/RAMADDA/IDV+Community+Resources/Unidata+IDV+Screencasts/Unidata+IDV+Screencast+16+-+Exploring+Earthquake+CSV+Data+in+the+IDV?entryid=89fc0663-0d7c-464a-b10b-6245e6c9340d
> >>>
> >>> Please take the time to really study the video and also your data.
> >>>
> >>> After you have done your homework, please let us know if you have more
> >>> questions about filtering, time or anything else.
> >>>
> >>> Best,
> >>>
> >>> Unidata IDV Support
> >>>
> >>>
> >>> > Okay I switched the units to Km. I have tried both putting the brackets
> >>> > around the units and without them. I have also tried just entering in
> >>> the
> >>> > value in m. I keep getting the same error message.
> >>> >
> >>> > Please see the attached screen shot
> >>> >
> >>> > address@hidden> wrote:
> >>> >
> >>> > > Robbie,
> >>> > >
> >>> > > You can also specify units in the filter
> >>> > >
> >>> > >
> >>> > >
> >>> https://www.unidata.ucar.edu/software/idv/docs/userguide/controls/StationModelControl.html
> >>> > >
> >>> > >
> >>> http://www.unidata.ucar.edu/software/idv/docs/workshop/datadisplays/point/MetarSynopDisplays.html
> >>> > >
> >>> > > So here it would be -100[km], I believe.
> >>> > >
> >>> > > Or do a "Point Data List" for the Display to see the units you are
> >>> dealing
> >>> > > with.
> >>> > >
> >>> > > Also note:
> >>> > >
> >>> > > "If you do not provide a unit then the comparison is done using the
> >>> native
> >>> > > unit of the observation value. "
> >>> > >
> >>> > > Best,
> >>> > >
> >>> > > Unidata IDV Support
> >>> > >
> >>> > >
> >>> > > > And that's the brain fart of the day
> >>> > > >
> >>> > > > Thanks
> >>> > > > R
> >>> > > address@hidden>
> >>> > > > wrote:
> >>> > > >
> >>> > > > > Robbie,
> >>> > > > >
> >>> > > > > Converting from kilometers to meters is a fairly simple
> >>> arithmetic
> >>> > > > > operation.
> >>> > > > >
> >>> > > > > For example, 1 kilometer = 1,000 meters or 100 kilometers is
> >>> 100,000
> >>> > > > > meters.
> >>> > > > >
> >>> > > > > Does that make sense?
> >>> > > > >
> >>> > > > > Best,
> >>> > > > >
> >>> > > > > Unidata IDV Support
> >>> > > > >
> >>> > > > > > No it is within 100km of the surface. How do I adjust the
> >>> scale on
> >>> > > the
> >>> > > > > > filter?
> >>> > > > > >
> >>> > > > > > address@hidden> wrote:
> >>> > > > > >
> >>> > > > > > > Robbie,
> >>> > > > > > >
> >>> > > > > > > Are you sure the data are within a 100 meters of the surface
> >>> of the
> >>> > > > > Earth?
> >>> > > > > > >
> >>> > > > > > > Best,
> >>> > > > > > >
> >>> > > > > > > Unidata IDV Support
> >>> > > > > > >
> >>> > > > > > > > Yes i am plotting seismic data of magnitude 2 sso it show
> >>> up in
> >>> > > > > shallow
> >>> > > > > > > > depths. I have also tried 300 400 and 600 and still
> >>> received the
> >>> > > same
> >>> > > > > > > error
> >>> > > > > > > > message
> >>> > > > > > > address@hidden>
> >>> > > > > > > > wrote:
> >>> > > > > > > >
> >>> > > > > > > > > Robbie,
> >>> > > > > > > > >
> >>> > > > > > > > > Are you expecting data "above" 100 meters below the
> >>> ground
> >>> > > because
> >>> > > > > > > that's
> >>> > > > > > > > > what you are asking for. Is your seismic data really
> >>> between
> >>> > > the
> >>> > > > > > > surface
> >>> > > > > > > > > of the
> >>> > > > > > > > > Earth and 100 meters deep?
> >>> > > > > > > > >
> >>> > > > > > > > > Best,
> >>> > > > > > > > >
> >>> > > > > > > > > Unidata IDV Support
> >>> > > > > > > > >
> >>> > > > > > > > > > That makes sense because they are depths. I changed my
> >>> filter
> >>> > > > > value
> >>> > > > > > > to
> >>> > > > > > > > > > negative thinking this would fix the problem however I
> >>> > > received
> >>> > > > > the
> >>> > > > > > > same
> >>> > > > > > > > > > error message. What should I do? Is there any where I
> >>> could
> >>> > > > > upload my
> >>> > > > > > > > > data
> >>> > > > > > > > > > where you would have accesses to it?
> >>> > > > > > > > > >
> >>> > > > > > > > > > Robbie
> >>> > > > > > > > > >
> >>> > > > > > > > > > address@hidden> wrote:
> >>> > > > > > > > > >
> >>> > > > > > > > > > > Robbie,
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > The data are not in the atmosphere.
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > Best,
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > Unidata IDV Support
> >>> > > > > > > > > > >
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > > I do not considering the data I entered in the
> >>> system
> >>> > > should
> >>> > > > > > > match.
> >>> > > > > > > > > It
> >>> > > > > > > > > > > > contains depth and magnitude. Magnitude being
> >>> something I
> >>> > > > > > > identified
> >>> > > > > > > > > > > while
> >>> > > > > > > > > > > > uploading the data. There should be values for
> >>> these in
> >>> > > the
> >>> > > > > text
> >>> > > > > > > > > point
> >>> > > > > > > > > > > data
> >>> > > > > > > > > > > > file I uploaded from USGS.
> >>> > > > > > > > > > > >
> >>> > > > > > > > > > > > Robbie
> >>> > > > > > > > > > > >
> >>> > > > > > > > > > > > On Mon, Mar 9, 2015 at 9:30 AM, Unidata IDV
> >>> > > > > > > > > > > > address@hidden> wrote:
> >>> > > > > > > > > > > >
> >>> > > > > > > > > > > > > Robbie,
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > > Although the error message could be better, I
> >>> think the
> >>> > > > > IDV is
> >>> > > > > > > > > telling
> >>> > > > > > > > > > > you
> >>> > > > > > > > > > > > > there are no data matching your criteria. Do you
> >>> see
> >>> > > the
> >>> > > > > > > problem?
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > > Best,
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > > Unidata IDV Support
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > Let me know if this helps
> >>> > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > On Fri, Mar 6, 2015 at 2:32 PM, Unidata IDV
> >>> > > > > > > > > > > > > > address@hidden> wrote:
> >>> > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > Robbie,
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > Please provide the exact filtering
> >>> parameters.
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > Perhaps provide a screen shot of the
> >>> Filtering
> >>> > > dialog.
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > Best,
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > Unidata IDV Support
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > > Hello IDV-
> >>> > > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > > I am attempting to filter my seismic data
> >>> based
> >>> > > on
> >>> > > > > > > magnitude
> >>> > > > > > > > > > > however
> >>> > > > > > > > > > > > > i
> >>> > > > > > > > > > > > > > > keep
> >>> > > > > > > > > > > > > > > > getting a error message. I am unsure what
> >>> this
> >>> > > error
> >>> > > > > > > message
> >>> > > > > > > > > > > means.
> >>> > > > > > > > > > > > > How
> >>> > > > > > > > > > > > > > > can
> >>> > > > > > > > > > > > > > > > I filter my text point data by depth,
> >>> magnitude
> >>> > > and
> >>> > > > > > > > > location? I
> >>> > > > > > > > > > > have
> >>> > > > > > > > > > > > > > > > included a picture of the error message
> >>> > > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > > Robbie
> >>> > > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > > Ticket Details
> >>> > > > > > > > > > > > > > > ===================
> >>> > > > > > > > > > > > > > > Ticket ID: OFE-561124
> >>> > > > > > > > > > > > > > > Department: Support IDV
> >>> > > > > > > > > > > > > > > Priority: Normal
> >>> > > > > > > > > > > > > > > Status: Closed
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > >
> >>> > > > > > > > > > > > > >
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > > Ticket Details
> >>> > > > > > > > > > > > > ===================
> >>> > > > > > > > > > > > > Ticket ID: OFE-561124
> >>> > > > > > > > > > > > > Department: Support IDV
> >>> > > > > > > > > > > > > Priority: Normal
> >>> > > > > > > > > > > > > Status: Closed
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > > >
> >>> > > > > > > > > > > >
> >>> > > > > > > > > > > >
> >>> > > > > > > > > > >
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > Ticket Details
> >>> > > > > > > > > > > ===================
> >>> > > > > > > > > > > Ticket ID: OFE-561124
> >>> > > > > > > > > > > Department: Support IDV
> >>> > > > > > > > > > > Priority: Normal
> >>> > > > > > > > > > > Status: Closed
> >>> > > > > > > > > > >
> >>> > > > > > > > > > >
> >>> > > > > > > > > >
> >>> > > > > > > > > >
> >>> > > > > > > > >
> >>> > > > > > > > >
> >>> > > > > > > > > Ticket Details
> >>> > > > > > > > > ===================
> >>> > > > > > > > > Ticket ID: OFE-561124
> >>> > > > > > > > > Department: Support IDV
> >>> > > > > > > > > Priority: Normal
> >>> > > > > > > > > Status: Closed
> >>> > > > > > > > >
> >>> > > > > > > > >
> >>> > > > > > > >
> >>> > > > > > > >
> >>> > > > > > >
> >>> > > > > > >
> >>> > > > > > > Ticket Details
> >>> > > > > > > ===================
> >>> > > > > > > Ticket ID: OFE-561124
> >>> > > > > > > Department: Support IDV
> >>> > > > > > > Priority: Normal
> >>> > > > > > > Status: Closed
> >>> > > > > > >
> >>> > > > > > >
> >>> > > > > >
> >>> > > > > >
> >>> > > > >
> >>> > > > >
> >>> > > > > Ticket Details
> >>> > > > > ===================
> >>> > > > > Ticket ID: OFE-561124
> >>> > > > > Department: Support IDV
> >>> > > > > Priority: Normal
> >>> > > > > Status: Closed
> >>> > > > >
> >>> > > > >
> >>> > > >
> >>> > > >
> >>> > >
> >>> > >
> >>> > > Ticket Details
> >>> > > ===================
> >>> > > Ticket ID: OFE-561124
> >>> > > Department: Support IDV
> >>> > > Priority: Normal
> >>> > > Status: Closed
> >>> > >
> >>> > >
> >>> >
> >>> >
> >>>
> >>>
> >>> Ticket Details
> >>> ===================
> >>> Ticket ID: OFE-561124
> >>> Department: Support IDV
> >>> Priority: Normal
> >>> Status: Closed
> >>>
> >>>
> >>
> >
>
>
Ticket Details
===================
Ticket ID: OFE-561124
Department: Support IDV
Priority: Normal
Status: Closed