[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IDV #OFE-561124]: Filtering

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: [IDV #OFE-561124]: Filtering
  • Date: Tue, 10 Mar 2015 20:29:18 -0600
Robbie,

You can also specify units in the filter

https://www.unidata.ucar.edu/software/idv/docs/userguide/controls/StationModelControl.html
http://www.unidata.ucar.edu/software/idv/docs/workshop/datadisplays/point/MetarSynopDisplays.html

So here it would be -100[km], I believe.

Or do a "Point Data List" for the Display to see the units you are dealing with.

Also note:

"If you do not provide a unit then the comparison is done using the native unit 
of the observation value. "

Best,

Unidata IDV Support


> And that's the brain fart of the day
> 
> Thanks
> R
> On Mar 10, 2015 8:55 PM, "Unidata IDV Support" <address@hidden>
> wrote:
> 
> > Robbie,
> >
> > Converting from kilometers to meters is a fairly simple arithmetic
> > operation.
> >
> > For example, 1 kilometer = 1,000 meters or 100 kilometers is 100,000
> > meters.
> >
> > Does that make sense?
> >
> > Best,
> >
> > Unidata IDV Support
> >
> > > No it is within 100km of the surface. How do I adjust the scale on the
> > > filter?
> > >
> > > address@hidden> wrote:
> > >
> > > > Robbie,
> > > >
> > > > Are you sure the data are within a 100 meters of the surface of the
> > Earth?
> > > >
> > > > Best,
> > > >
> > > > Unidata IDV Support
> > > >
> > > > > Yes i am plotting seismic data of magnitude 2 sso it show up in
> > shallow
> > > > > depths. I have also tried 300 400 and 600 and still received the same
> > > > error
> > > > > message
> > > > address@hidden>
> > > > > wrote:
> > > > >
> > > > > > Robbie,
> > > > > >
> > > > > > Are you expecting data "above" 100 meters below the ground because
> > > > that's
> > > > > > what you are asking for. Is your seismic data really between the
> > > > surface
> > > > > > of the
> > > > > > Earth and 100 meters deep?
> > > > > >
> > > > > > Best,
> > > > > >
> > > > > > Unidata IDV Support
> > > > > >
> > > > > > > That makes sense because they are depths. I changed my filter
> > value
> > > > to
> > > > > > > negative thinking this would fix the problem however I received
> > the
> > > > same
> > > > > > > error message. What should I do? Is there any where I could
> > upload my
> > > > > > data
> > > > > > > where you would have accesses to it?
> > > > > > >
> > > > > > > Robbie
> > > > > > >
> > > > > > > address@hidden> wrote:
> > > > > > >
> > > > > > > > Robbie,
> > > > > > > >
> > > > > > > > The data are not in the atmosphere.
> > > > > > > >
> > > > > > > > Best,
> > > > > > > >
> > > > > > > > Unidata IDV Support
> > > > > > > >
> > > > > > > >
> > > > > > > > > I do not considering the data I entered in the system should
> > > > match.
> > > > > > It
> > > > > > > > > contains depth and magnitude. Magnitude being something I
> > > > identified
> > > > > > > > while
> > > > > > > > > uploading the data. There should be values for these in the
> > text
> > > > > > point
> > > > > > > > data
> > > > > > > > > file I uploaded from USGS.
> > > > > > > > >
> > > > > > > > > Robbie
> > > > > > > > >
> > > > > > > > > address@hidden> wrote:
> > > > > > > > >
> > > > > > > > > > Robbie,
> > > > > > > > > >
> > > > > > > > > > Although the error message could be better, I think the
> > IDV is
> > > > > > telling
> > > > > > > > you
> > > > > > > > > > there are no data matching your criteria. Do you see the
> > > > problem?
> > > > > > > > > >
> > > > > > > > > > Best,
> > > > > > > > > >
> > > > > > > > > > Unidata IDV Support
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > Let me know if this helps
> > > > > > > > > > >
> > > > > > > > > > > address@hidden> wrote:
> > > > > > > > > > >
> > > > > > > > > > > > Robbie,
> > > > > > > > > > > >
> > > > > > > > > > > > Please provide the exact filtering parameters.
> > > > > > > > > > > >
> > > > > > > > > > > > Perhaps provide a screen shot of the Filtering dialog.
> > > > > > > > > > > >
> > > > > > > > > > > > Best,
> > > > > > > > > > > >
> > > > > > > > > > > > Unidata IDV Support
> > > > > > > > > > > >
> > > > > > > > > > > > > Hello IDV-
> > > > > > > > > > > > >
> > > > > > > > > > > > > I am attempting to filter my seismic data based on
> > > > magnitude
> > > > > > > > however
> > > > > > > > > > i
> > > > > > > > > > > > keep
> > > > > > > > > > > > > getting a error message. I am unsure what this error
> > > > message
> > > > > > > > means.
> > > > > > > > > > How
> > > > > > > > > > > > can
> > > > > > > > > > > > > I filter my text point data by depth, magnitude and
> > > > > > location? I
> > > > > > > > have
> > > > > > > > > > > > > included a picture of the error message
> > > > > > > > > > > > >
> > > > > > > > > > > > > Robbie
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Ticket Details
> > > > > > > > > > > > ===================
> > > > > > > > > > > > Ticket ID: OFE-561124
> > > > > > > > > > > > Department: Support IDV
> > > > > > > > > > > > Priority: Normal
> > > > > > > > > > > > Status: Closed
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Ticket Details
> > > > > > > > > > ===================
> > > > > > > > > > Ticket ID: OFE-561124
> > > > > > > > > > Department: Support IDV
> > > > > > > > > > Priority: Normal
> > > > > > > > > > Status: Closed
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Ticket Details
> > > > > > > > ===================
> > > > > > > > Ticket ID: OFE-561124
> > > > > > > > Department: Support IDV
> > > > > > > > Priority: Normal
> > > > > > > > Status: Closed
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > Ticket Details
> > > > > > ===================
> > > > > > Ticket ID: OFE-561124
> > > > > > Department: Support IDV
> > > > > > Priority: Normal
> > > > > > Status: Closed
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > Ticket Details
> > > > ===================
> > > > Ticket ID: OFE-561124
> > > > Department: Support IDV
> > > > Priority: Normal
> > > > Status: Closed
> > > >
> > > >
> > >
> > >
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: OFE-561124
> > Department: Support IDV
> > Priority: Normal
> > Status: Closed
> >
> >
> 
> 


Ticket Details
===================
Ticket ID: OFE-561124
Department: Support IDV
Priority: Normal
Status: Closed