[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IDV #JPX-323608]: WorldWind locations no longer work

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: [IDV #JPX-323608]: WorldWind locations no longer work
  • Date: Thu, 17 Jul 2014 16:40:36 -0600
> I'll have to do it tomorrow because now I have conflicts.  I think it
> would be better to back out of my changes because the Rectangle2D that
> you get from NavigatedDisplay.getLatLonBox() is wrong and will just
> create problems down the line.  I haven't seen any problems with the PR
> with the new changes I made.
> 
> Don
> 

Ok, let me know and I can roll back my changes.

Yuan
> On 7/17/14, 4:11 PM, Unidata IDV Support wrote:
> >> I'm not sure it's worth the effort.  Everything worked before the old
> >> way.  I just never should have made the change.  Your call though.
> >>
> >> Don
> >>
> >
> > I checked in the changes, more isolated to the worldwind classes. Could you 
> > give it a try?
> >
> >
> > Yuan
> >> On 7/17/14, 1:57 PM, Unidata IDV Support wrote:
> >>>> Yuan-
> >>>>
> >>>> I have a solution, which involves backing out of most of that checkin.
> >>>> My thought process on changing the NavigatedDisplay code was wrong.
> >>>> When we use a Rectangle2D for a lat/lon bounding box, we have to use the
> >>>> convention that it is upside down from the way a Rectangle2D is supposed
> >>>> to be where we have the origin at the lower left corner instead of the
> >>>> upper left. I tried to change it to be the upper left with that checkin,
> >>>> but that logic is faulty and it doesn't seem like Rectangle2D likes
> >>>> negative widths.  This should probably all use LatLonRect instead of
> >>>> Rectangle2D, but I'm not going to do that change.
> >>>>
> >>>
> >>> I more prefer the LatLonRect option, and let me give it a try.
> >>>
> >>> Yuan
> >>>> This might have ripple effects on the progressive resolution stuff. I've
> >>>> done some testing and didn't see any problems, but I didn't do an
> >>>> exhaustive test. Do you want me to check it in?
> >>>>
> >>>> Don
> >>>>
> >>>> On 7/17/14, 10:13 AM, Unidata IDV Support wrote:
> >>>>>> Full Name: Don Murray
> >>>>>> Email Address: address@hidden
> >>>>>> Organization: CU/CIRES
> >>>>>> Package Version: 5.0 build date:2014-06-01 23:09 UTC
> >>>>>> Operating System: Mac OS X
> >>>>>> Hardware: Java: home: 
> >>>>>> /Volumes/User/dmurray/IDV_5.0/jre.bundle/Contents/Home version: 
> >>>>>> 1.7.0_51 j3d:1.6.0-pre9-daily-experimental daily
> >>>>>> Description of problem: I think this probably is because of the 
> >>>>>> changes on conan, but no locations show up for the 
> >>>>>> Displays->Special->WorldWind locations.
> >>>>>>
> >>>>>>
> >>>>> Don,
> >>>>>          The committed from 
> >>>>> https://github.com/Unidata/IDV/commit/452a3c7 broke the WorkdWind, do 
> >>>>> you have the time to take a look?
> >>>>>
> >>>>>
> >>>>> Yuan
> >>>>>
> >>>>> Ticket Details
> >>>>> ===================
> >>>>> Ticket ID: JPX-323608
> >>>>> Department: Support IDV
> >>>>> Priority: Normal
> >>>>> Status: Open
> >>>>>
> >>>>
> >>>> --
> >>>> Don Murray
> >>>> NOAA/ESRL/PSD and CU-CIRES
> >>>> 303-497-3596
> >>>> http://www.esrl.noaa.gov/psd/people/don.murray/
> >>>>
> >>>>
> >>>
> >>>
> >>> Ticket Details
> >>> ===================
> >>> Ticket ID: JPX-323608
> >>> Department: Support IDV
> >>> Priority: Normal
> >>> Status: Open
> >>>
> >>
> >> --
> >> Don Murray
> >> NOAA/ESRL/PSD and CU-CIRES
> >> 303-497-3596
> >> http://www.esrl.noaa.gov/psd/people/don.murray/
> >>
> >>
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: JPX-323608
> > Department: Support IDV
> > Priority: Normal
> > Status: Open
> >
> 
> --
> Don Murray
> NOAA/ESRL/PSD and CU-CIRES
> 303-497-3596
> http://www.esrl.noaa.gov/psd/people/don.murray/
> 
> 
> I'll have to do it tomorrow because now I have conflicts.  I think it
> would be better to back out of my changes because the Rectangle2D that
> you get from NavigatedDisplay.getLatLonBox() is wrong and will just
> create problems down the line.  I haven't seen any problems with the PR
> with the new changes I made.
> 
> Don
> 
> On 7/17/14, 4:11 PM, Unidata IDV Support wrote:
> >> I'm not sure it's worth the effort.  Everything worked before the old
> >> way.  I just never should have made the change.  Your call though.
> >>
> >> Don
> >>
> >
> > I checked in the changes, more isolated to the worldwind classes. Could you 
> > give it a try?
> >
> >
> > Yuan
> >> On 7/17/14, 1:57 PM, Unidata IDV Support wrote:
> >>>> Yuan-
> >>>>
> >>>> I have a solution, which involves backing out of most of that checkin.
> >>>> My thought process on changing the NavigatedDisplay code was wrong.
> >>>> When we use a Rectangle2D for a lat/lon bounding box, we have to use the
> >>>> convention that it is upside down from the way a Rectangle2D is supposed
> >>>> to be where we have the origin at the lower left corner instead of the
> >>>> upper left. I tried to change it to be the upper left with that checkin,
> >>>> but that logic is faulty and it doesn't seem like Rectangle2D likes
> >>>> negative widths.  This should probably all use LatLonRect instead of
> >>>> Rectangle2D, but I'm not going to do that change.
> >>>>
> >>>
> >>> I more prefer the LatLonRect option, and let me give it a try.
> >>>
> >>> Yuan
> >>>> This might have ripple effects on the progressive resolution stuff. I've
> >>>> done some testing and didn't see any problems, but I didn't do an
> >>>> exhaustive test. Do you want me to check it in?
> >>>>
> >>>> Don
> >>>>
> >>>> On 7/17/14, 10:13 AM, Unidata IDV Support wrote:
> >>>>>> Full Name: Don Murray
> >>>>>> Email Address: address@hidden
> >>>>>> Organization: CU/CIRES
> >>>>>> Package Version: 5.0 build date:2014-06-01 23:09 UTC
> >>>>>> Operating System: Mac OS X
> >>>>>> Hardware: Java: home: 
> >>>>>> /Volumes/User/dmurray/IDV_5.0/jre.bundle/Contents/Home version: 
> >>>>>> 1.7.0_51 j3d:1.6.0-pre9-daily-experimental daily
> >>>>>> Description of problem: I think this probably is because of the 
> >>>>>> changes on conan, but no locations show up for the 
> >>>>>> Displays->Special->WorldWind locations.
> >>>>>>
> >>>>>>
> >>>>> Don,
> >>>>>          The committed from 
> >>>>> https://github.com/Unidata/IDV/commit/452a3c7 broke the WorkdWind, do 
> >>>>> you have the time to take a look?
> >>>>>
> >>>>>
> >>>>> Yuan
> >>>>>
> >>>>> Ticket Details
> >>>>> ===================
> >>>>> Ticket ID: JPX-323608
> >>>>> Department: Support IDV
> >>>>> Priority: Normal
> >>>>> Status: Open
> >>>>>
> >>>>
> >>>> --
> >>>> Don Murray
> >>>> NOAA/ESRL/PSD and CU-CIRES
> >>>> 303-497-3596
> >>>> http://www.esrl.noaa.gov/psd/people/don.murray/
> >>>>
> >>>>
> >>>
> >>>
> >>> Ticket Details
> >>> ===================
> >>> Ticket ID: JPX-323608
> >>> Department: Support IDV
> >>> Priority: Normal
> >>> Status: Open
> >>>
> >>
> >> --
> >> Don Murray
> >> NOAA/ESRL/PSD and CU-CIRES
> >> 303-497-3596
> >> http://www.esrl.noaa.gov/psd/people/don.murray/
> >>
> >>
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: JPX-323608
> > Department: Support IDV
> > Priority: Normal
> > Status: Open
> >
> 
> --
> Don Murray
> NOAA/ESRL/PSD and CU-CIRES
> 303-497-3596
> http://www.esrl.noaa.gov/psd/people/don.murray/
> 
> 


Ticket Details
===================
Ticket ID: JPX-323608
Department: Support IDV
Priority: Normal
Status: Open