This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.
Hi Jason, IP #'s work just fine...no worries. Jeff --------------------------------------------------------------------- Jeff Weber address@hidden : Unidata Program Center PH:303-497-8676 : University Corp for Atmospheric Research 3300 Mitchell Ln : http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000 : --------------------------------------------------------------------- On Tue, 20 Jul 2004, Jason T. Smith wrote: > Hi, > I was talking with Dr. Joseph and he said that zephyr is not in use. He > also said that due to DNS problems, the FQDN may or may not work. If it > doesn't work can we use the ip address of it? > > Jason > > Quoting Jeff Weber <address@hidden>: > > > HI Jason, > > > > I suspect the name change from: > > > > drizzle.sytes.net > > > > to > > > > drizzle.hupas.howard.edu > > > > is the issue :) > > > > > > No need to save any settings, proceed with the source install [6.0.14], > > and please let us know if you have any questions or if we can help in any > > way. > > > > Cheers, > > > > Jeff > > --------------------------------------------------------------------- > > Jeff Weber address@hidden : > > Unidata Program Center PH:303-497-8676 : > > University Corp for Atmospheric Research 3300 Mitchell Ln : > > http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000 : > > --------------------------------------------------------------------- > > > > On Tue, 20 Jul 2004, Jason T. Smith wrote: > > > > > Hello, > > > When I started it was given to me on the machine > > drizzle.hupas.howard.edu. I > > > dont know about zephyr. The machine drizzle.sytes.net might be an alias > > for > > > drizzle.hupas.howard.edu. I can check into that. I will be working on > > upgrading > > > the installation in the next few days, but are there any special settings > > that > > > I need to preserve? Thanks. > > > > > > Jason Smith > > > > > > > > > Quoting Jeff Weber <address@hidden>: > > > > > > > Hi Jason, > > > > > > > > > > > > > > > > allow ANY-NLDN-WSI zephyr\.124\.238\.138\.in-addr\.arpa # Howard > > University > > > > allow ANY-NLDN-WSI drizzle.sytes.net # Howard University > > > > (second machine) > > > > > > > > > > > > You are allowed from "atm.geo.nsf.gov"... > > > > > > > > Have you give up on the machine "zephyr"? > > > > > > > > > > > > Please upgrade to LDM 6.0.14, I do not think this is the problem, but it > > > > may be, and it is best to have the latest tested version, we know of > > bugs > > > > in 6.0.10. > > > > > > > > > > > > Let me know how things go after upgrading and we will trouble shoot from > > > > there. > > > > > > > > To upgrade please visit: > > > > > > > > http://gforge.unidata.ucar.edu/projects/ldm/home/index.html > > > > > > > > and obtain the source distribution. > > > > > > > > Cheers, > > > > > > > > Jeff > > > > --------------------------------------------------------------------- > > > > Jeff Weber address@hidden : > > > > Unidata Program Center PH:303-497-8676 : > > > > University Corp for Atmospheric Research 3300 Mitchell Ln : > > > > http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000 : > > > > --------------------------------------------------------------------- > > > > > > > > On Mon, 19 Jul 2004, Unidata Support wrote: > > > > > > > > > > > > > > ------- Forwarded Message > > > > > > > > > > >To: address@hidden > > > > > >cc: address@hidden > > > > > >From: "Jason T. Smith" <address@hidden> > > > > > >Subject: Howard LDM feed > > > > > >Organization: UCAR/Unidata > > > > > >Keywords: 200407191752.i6JHqGaW002033 > > > > > > > > > > Hello, > > > > > I am Jason Smith and I am working with Dr. Joseph at Howard > > Univerisity > > > > to > > > > > setup the LDM on a machine locally. Below is the startup log of when > > i > > > > ran > > > > > ldmadmin start. Im not sure where its not connecting from should be > > > > > interesting since i think it might be something dealing with the > > > > connection > > > > > between drizzle(the local ldm host) and where it is tring to connect. > > Any > > > > ideas > > > > > what is causing this and how to fix it. I got in contact with Kevin > > > > Thomas, > > > > > about this, his response is below. Thank you in advance. > > > > > > > > > > Jason Smith > > > > > > > > > > > > > > > > > > > > Jul 11 16:29:42 drizzle rpc.ldmd[29168]: Starting Up (version: 6.0.10; > > > > built: > > > > > May 3 2003 23:33:39) > > > > > Jul 11 16:29:42 drizzle pqbinstats[29170]: Starting Up (29168) > > > > > Jul 11 16:29:42 drizzle pqact[29171]: Starting Up > > > > > Jul 11 16:29:42 drizzle rtstats[29172]: Starting Up (29168) > > > > > Jul 11 16:29:42 drizzle atm[29173]: Starting Up(6.0.10): > > > > atm.geo.nsf.gov: > > > > > TS_ZERO TS_ENDT {{NNEXRAD, "/p...(AMX|ABR|LWX|DOX|AKQ)"}} > > > > > Jul 11 16:29:42 drizzle atm[29173]: Desired product class: > > > > 20040711152942.965 > > > > > TS_ENDT {{NNEXRAD, "/p...(AMX|ABR|LWX|DOX|AKQ)"}} > > > > > Jul 11 16:29:42 drizzle atm[29173]: acl.c:703: nullproc_6() failure: > > RPC: > > > > > Unable to receive; errno = Connection reset by peer > > > > > Jul 11 16:29:43 drizzle atm[29173]: acl.c:703: nullproc_5() failure: > > RPC: > > > > > Unable to receive; errno = Connection reset by peer > > > > > Jul 11 16:30:13 drizzle atm[29173]: Desired product class: > > > > 20040711152942.965 > > > > > TS_ENDT {{NNEXRAD, "/p...(AMX|ABR|LWX|DOX|AKQ)"}} > > > > > > > > > > Hi Jason... > > > > > > > > > > Based on the output in my log files, I *think* the message means that > > > > > "atm.geo.nsf.gov" isn't configured to give you access to the data. > > Have > > > > you > > > > > requested access? Unidata people, address@hidden, can help > > you > > > > here. > > > > > > > > > > Before contacting Unidata, I'd recommend upgrading your LDM software. > > The > > > > > current version is 6.0.14. The documentation that I have says that it > > > > fixes > > > > > several performance problems, including connection issues. It > > probably > > > > won't > > > > > fix your problem, however, it wouldn't hurt to make sure you are using > > the > > > > > software that everyone is using first before trying to get help from > > > > Unidata. > > > > > > > > > > Good Luck. > > > > > > > > > > Kevin W. Thomas > > > > > Center for Analysis and Prediction of Storms > > > > > University of Oklahoma > > > > > Norman, Oklahoma > > > > > > > > > > > > > > > > > > > > ------------------------------------------------- > > > > > This mail sent through IMP: http://horde.org/imp/ > > > > > > > > > > -- > > > > > > > > > > > **************************************************************************** > > > > > Unidata User Support UCAR Unidata > > > > > (303)497-8643 P.O. > > Box > > > > > address@hidden Boulder, CO > > > > > > > > > > > ---------------------------------------------------------------------------- > > > > > Unidata WWW Service > > http://my.unidata.ucar.edu/content/support > > > > > > > > > > > ---------------------------------------------------------------------------- > > > > > NOTE: All email exchanges with Unidata User Support are recorded in > > the > > > > > Unidata inquiry tracking system and then made publically available > > > > > through the web. If you do not want to have your interactions made > > > > > available in this way, you must let us know in each email you send to > > us. > > > > > > > > > > ------- End of Forwarded Message > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------- > > > This mail sent through IMP: http://horde.org/imp/ > > > > > > > > > > ------------------------------------------------- > This mail sent through IMP: http://horde.org/imp/ >