This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.
Dan, Thanks for the hint on surface reports. Just wanted you to know that the latest version of pqing has a -5 flag to exclude the sequence number from the MD5 checksum calculations. I think using the -5 flag will permit products coming from different vendors s/w to have the same checksum results. At this time we are not using the -5 flag but it will be implemented in the near future. Robb... On Mon, 7 Aug 2000, Dan Vietor wrote: > I'm having problems with the SAUS4x and SAUS5x products. I think they > may still be TEST but not labeled as such. The big problem is > intermixing SPECI and METAR reports. There is no way to distinguish the > two which is causing duplicate hourly reports. > > I took a look at the SAUS43 KLOT and last hour there were only 2, each > with a single METAR, one for KRFD and the other KORD. > > >From what I can tell, these products contain METARs that are already in > products such as SAUS70 and SAUS80 so I'm tempted to filter them out. > > I'll continue to research this... > ________________________________________________________ > Daniel Vietor Mail: address@hidden > Unisys Corp Title: Engineer/Meteorologist > 221 Gale Lane Phone: 610-444-2407 > Kennett Square PA 19348 Fax: 610-444-2420 > > > > > -----Original Message----- > > From: address@hidden > > [mailto:address@hidden]On Behalf Of Gilbert Sebenste > > Sent: Monday, August 07, 2000 11:48 AM > > To: Tom McDermott > > Cc: Russ Rew; address@hidden; address@hidden; > > address@hidden > > Subject: Re: SAUS4* headers not being processed > > > > > > On Mon, 7 Aug 2000, Tom McDermott wrote: > > > > > Interesting. I don't seem to have any obs from KLOT or KCHI in my > > > 'weather' program 'metar_gdb' files from as far back as > > 07/31, well before > > > 5.1.2b was installed. So the problem may date back further and be > > > unrelated to the new ldm. > > > > That is true. The LDM rejected any SAUS4* headers before > > 5.011, according > > to the file which lists all the updates. These were test > > METARs, but now, > > they're no longer stamped as such. > > > > > Funny thing is, I also keep "flat" metar files, > > > which do have KLOT and KCHI obs, but I can't find them > > using the 'weather' > > > program. > > > > I guess pqsurf still doesn't like the SAUS4* headers. Because > > when I save > > the METARs as raw files (not going through pqsurf), I do get > > them as well. > > BTW, outside of this, let me emphasize again...this beta > > version is rock > > stable, and I am noticing a performance increase on my > > system...my load > > average used to be right around .99, now it's .75 this > > morning. Even late > > last week, when there was much more precip on the radar, the > > system was > > running about 10%-20% less load than usual. > > > > ************************************************************** > > ***************** > > Gilbert Sebenste > > ******** > > Internet: address@hidden (My opinions only!) > > ****** > > Staff Meteorologist, Northern Illinois University > > **** > > E-mail: address@hidden > > *** > > web: http://weather.admin.niu.edu > > ** > > Work phone: 815-753-5492 > > * > > ************************************************************** > > ***************** > > > =============================================================================== Robb Kambic Unidata Program Center Software Engineer III Univ. Corp for Atmospheric Research address@hidden WWW: http://www.unidata.ucar.edu/ ===============================================================================