[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GEMPAK #SGQ-682303]: GDCNTR multiple grid files error
- Subject: [GEMPAK #SGQ-682303]: GDCNTR multiple grid files error
- Date: Thu, 04 Dec 2014 16:04:46 -0700
Could you re-send these program inputs either in .nts file or from the "l"
printout rather than "d" printout? as you've sent them I'm not able to
copy/paste. would save me a big chunk of time.
-mj
> bash-4.1$ oagrid
> GDFILE Grid file testprecip1129.grd
> DELTAN Station spacing 2.82
> DELTAX X spacing 1.41
> DELTAY Y spacing 1.41
> GRDAREA Area covered by grid us
> EXTEND Points to extend grid 2;2;2;2
> DTAAREA Data area for OA
> SOURCE Data source (SN or SF) sf
> SNFILE Sounding data file
> SFFILE Surface data file
> /data/burns/data/gempak/surface/20141129_sao.gem
> SNPARM Sounding parameter list ;TMPC;;HGHT;DWPC;BRBM
> SFPARM Surface parameter list P24M
> DATTIM Date/time 1200
> LEVELS Vertical levels 500
> MAXGRD Maximum number of grids 200
> Parameters requested: GDFILE,DELTAN,DELTAX,DELTAY,GRDAREA,EXTEND,DTAAREA,
> SOURCE,SNFILE,SFFILE,SNPARM,SFPARM,DATTIM,LEVELS,MAXGRD.
>
> -> testprecip1130.grd was created in same way except gdfile
> =testprecip1130.grd and sffile =
> /data/burns/data/gempak/surface/20141130_sao.gem
>
> bash-4.1$ oabsfc
> SFFILE Surface data file
> /data/burns/data/gempak/surface/20141129_sao.gem
> GDFILE Grid file testprecip1129.grd
> SFPARM Surface parameter list P24M
> DATTIM Date/time 1200
> DTAAREA Data area for OA
> GUESS Guess file
> GUESFUN Guess grid
> GAMMA Convergence parameter
> SEARCH Search radius/Extrapolation
> NPASS Number of passes 2
> QCNTL Quality control threshold
> OABND Bounds file(s) to use for 'block
> GDATTIM Grid date/time 1200
> GFUNC Scalar grid P24M
> GLEVEL Grid level 0
> GVCORD Grid vertical coordinate none
> Parameters requested: SFFILE,GDFILE,SFPARM,DATTIM,DTAAREA,GUESS,GUESFUN,
> GAMMA,SEARCH,NPASS,QCNTL,OABND,GDATTIM,GFUNC,GLEVEL,GVCORD.
>
> -> barnes analysis was the same for testprecip1130 except sffile and gdfile
>
> bash-4.1$ gdcntr
> GDATTIM Grid date/time 1200
> GLEVEL Grid level 0
> GVCORD Grid vertical coordinate none
> GFUNC Scalar grid add(p24m,p24m+2)
> GDFILE Grid file testprecip1129.grd +
> testprecip1130.grd
> CINT Contour interval/min/max 0
> LINE Color/type/width/label/smth/fltr 3/1/1
> MAP Map color/dash/width/filter flag 1
> MSCALE fgc;bgc;mask/units/lat;hide/valu 0
> TITLE Title color/line/title 1
> DEVICE Device|name|x size;y size|color xw
> SATFIL Satellite image filename(s)
> RADFIL Radar image filename(s)
> IMCBAR Color/ornt/anch/x;y/ln;wd/freq
> PROJ Map projection/angles/margins|dr CED
> GAREA Graphics area us -
> IJSKIP Iskp;Istrt;Istp/Jskp;Jstrt;Jstp
> CLEAR Clear screen flag y
> PANEL Panel loc/color/dash/width/regn 0
> TEXT Size/fnt/wdth/brdr/N-rot/just/hw 1
> SCALE Scalar scale / vector scale 999
> LATLON Line color/dash/width/freq/inc/l
> HILO Color/symbol/rng/rad/cnt/intp 0
> HLSYM HILO txt size/posn/font/wdth/hw 2;1//32//hw
> CLRBAR Color/ornt/anch/x;y/ln;wd/freq|t 1
> CONTUR Subbox/smooth 3
> SKIP Skip_cntr/skip_plt_x;skip_plt_y 0
> FINT Fill interval/min/max 10
> FLINE Fill colors/fill types 10-20
> CTYPE Contour type: C/F f
> LUTFIL Enhancement lookup table filenam
> STNPLT Txtc/txt attr|marker attr|stnfil
> Parameters requested: GDATTIM,GLEVEL,GVCORD,GFUNC,GDFILE,CINT,LINE,MAP,
> MSCALE,TITLE,DEVICE,SATFIL,RADFIL,IMCBAR,PROJ,GAREA,IJSKIP,CLEAR,PANEL,TEXT,
> SCALE,LATLON,HILO,HLSYM,CLRBAR,CONTUR,SKIP,FINT,FLINE,CTYPE,LUTFIL,STNPLT.
> ________________________________________
> From: Unidata GEMPAK Support <address@hidden>
> Sent: Thursday, December 04, 2014 4:41 PM
> To: Griffin, Matthew
> Cc: address@hidden
> Subject: [GEMPAK #SGQ-682303]: GDCNTR multiple grid files error
>
> Hi Matthew,
>
> I'll need both grid files that you're using, plus the full GEMPAK program
> input, either copy and paste the input or use "save tmp.nts" within the
> program and send that file. Small files can be attached to a reply to this
> email. Grid files should be uploaded to
>
> http://motherlode.ucar.edu/repository/alias/gempakuploads/
>
> -Michael
>
>
> > Description of problem: I am trying to add multiple grid files to the
> > gdcntr function in gempak to obtain accumulated precipitation over several
> > days. These grid files were created using oagrid and oabsfc on surface
> > metar data. Each individual grid can be mapped when using this function
> > but the error of "[DG -7] Input grid P24M ^141129/1200 @0 %NONE in ADD
> > cannot be found" arises when attempting to add multiple files in gdfile.
> > The gfunc used is ADD (P24M,P24M+2). Any help on this would be appreciated.
> >
> >
>
> Ticket Details
> ===================
> Ticket ID: SGQ-682303
> Department: Support GEMPAK
> Priority: Normal
> Status: Open
>
>
Ticket Details
===================
Ticket ID: SGQ-682303
Department: Support GEMPAK
Priority: Normal
Status: Open