[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
20050506: 20050506: NGRID feed and gempak
- Subject: 20050506: 20050506: NGRID feed and gempak
- Date: Fri, 06 May 2005 14:24:10 -0600
Clint,
In that case...you should know that I added a lot of
decoding/storage features for GRIB2 data for 5.8.1
in time for the new DVB-S data to be operational.
Chiz
>From: Clint Rowe <address@hidden>
>Organization: University of Nebraska Geosciences
>Keywords: 200505062000.j46K0EP3020250
>Chiz,
>We're not running 5.8.1 yet, 'cuz I need to upgrade the system
>(libc is too old, for starters, unless I compile from source --
>and, as I said before, I'm lazy).
>
>Thanks for the info.
>Clint
>
>On Fri, 2005-05-06 at 13:54, Unidata Support wrote:
>> >From: Clint Rowe <address@hidden>
>> >Organization: University of Nebraska Geosciences
>> >Keywords: 200505061746.j46Hk3P3003614
>>
>> >Chiz,
>> >
>> >What do I need to do to decode the NAM and DGEX products on NGRID?
>> >Di you have an example pqact.conf entry and do I need to make
>> >changes to my gribkey.tbl?
>> >
>> >Sure, I could figure this out on my own, but I'm being lazy ...
>> >
>> >Clint
>> >--
>> >====================================================================
>> >Clinton M. Rowe
>> >Associate Professor
>> >Meteorology/Climatology Program phone:(402)472-1946
>> >Department of Geosciences fax:(402)472-4917
>> >University of Nebraska-Lincoln address@hidden
>> >
>>
>> Clint,
>>
>> Are you running 5.8.1? The entries are in the pqact.gempak_decoders
>> and gribkey.tbl files.
>>
>> In pqact.gempak_decoders, you should have lines such as:
>> # ETA/NAM model output
>> # -------------------
>> # NOAAport ETA grids
>> # Grid #211 80km CONUS: ^[YZ].Q.*/m(ETA|NAM)
>> # Grid #212 40km CONUS: ^[YZ].R.*/m(ETA|NAM)
>> # Grid #214 47.5km Alaska: ^[YZ].T.*/m(ETA|NAM)
>> # Grid #215 20km CONUS: ^[YZ].U.*/m(ETA|NAM)
>> # Grid #216 45km Alaska: ^[YZ].V.*/m(ETA|NAM)
>> # Grid #217 22.5km Alaska: ^[YZ].Y.*/m(ETA|NAM)
>> # Grid #218 12km CONUS: ^[YZ].B.*/m(ETA|NAM)
>> # Grid #242 11.25km Alaska:^[YZ].S.*/m(ETA|NAM)
>> # Select any/all grids desired from [QRTUVYBS]
>> #
>> # CONDUIT ETA grids
>> # Grid #104 (90km): MT.(eta|nam).*#104
>> # Grid #212 (40km): MT.(eta|nam).*#212
>> # Grid #215 (20km): MT.(eta|nam).*#215
>> # Grid #216 (45km): MT.(eta|nam).*#216
>> # Grid #218 (12km): MT.(eta|nam).*#218
>> #
>> # DVB-S NOAAPORT
>> # Grid #218 (12km CONUS grib2): ^[LM].B... KWBE.*#218
>> # Grid #242 (11.25km Alaska grib2): ^[LM].S... KWBE.*#242
>> HDS|CONDUIT|NGRID (/mETA|/mNAM|MT.eta|MT.nam|^[LM]..... KWBE)
>> PIPE decoders/dcgrib2 -d data/gempak/logs/dcgrib2_ETA.log
>> -e GEMTBL=@GEMTBL@
>>
>> Then further down in the file:
>>
>> # DGEX Grid 185 CONUS 12km
>> NGRID ^[LM].E... KWBD ([0-3][0-9])([0-2][0-9][0-6][0-9])
>> PIPE decoders/dcgrib2 -m 200 -d data/gempak/logs/ngrib.log
>> -e GEMTBL=@GEMTBL@
>> data/gempak/model/dgex/YYYYMMDDHHfFFF_dgex.gem
>> #
>> # DGEX Grid 186 Alaska 12km
>> NGRID ^[LM].F... KWBD ([0-3][0-9])([0-2][0-9][0-6][0-9])
>> PIPE decoders/dcgrib2 -d data/gempak/logs/ngrib.log
>> -e GEMTBL=@GEMTBL@
>> data/gempak/model/dgex-ak/YYYYMMDDHHfFFF_dgex.gem
>>
>> The first will capture the NGRID products "^[LM].* KWBE" which will
>> comprise the ETA/NAM 218 and 242 alaska grids.
>> The 2 DGEX entries are self explanatory.
>>
>> The gribkey.tbl lines for eta218 and eta242 are:
>> 007 x 084,085 218 data/gempak/model/eta12km/YYYYMMDDHHfFFF_eta@@@.g
> em 1000
>> 007 x 084,085 242 data/gempak/model/eta-ak/YYYYMMDDHHfFFF_eta@@@.ge
> m 1000
>>
>>
>> I'm storing these files using the FFF template because they can get big in a
> single file.
>> In the datatype.tbl file:
>> ETA218 $MODEL/eta12km YYYYMMDDHHfFFF_eta218.gem CAT_GRD SC
> AT_FCT -1 -1 -1 OFF/0/0
>> ETA_AK $MODEL/eta-ak YYYYMMDDHHfFFF_eta.gem CAT_GRD SC
> AT_FCT -1 -1 -1 OFF/0/0
>>
>> ! DGEX
>> DGEX $MODEL/dgex YYYYMMDDHHfFFF_dgex.gem CAT_GRD SC
> AT_FCT -1 -1 -1 OFF/0/0
>> DGEX_AK $MODEL/dgex-ak YYYYMMDDHHfFFF_dgex.gem CAT_GRD SC
> AT_FCT -1 -1 -1 OFF/0/0
>>
>>
>> If you are running 5.8.1, then the "OFF/" string isn't there in the lines ab
> ove, but will be added in 5.8.2.
>> If your table is pre5.8.1, thenb the "0/0" horizontal remapping isn't there
> either.
>>
>> Chiz
>>
>>
>>
>> Steve Chiswell
>> Unidata User Support
>>
>>
>> --
>> ****************************************************************************
> <
>> Unidata User Support UCAR Unidata Program
> <
>> (303)497-8643 P.O. Box 3000
> <
>> address@hidden Boulder, CO 80307
> <
>> ----------------------------------------------------------------------------
> <
>> Unidata WWW Service http://my.unidata.ucar.edu/content/support
> <
>> ----------------------------------------------------------------------------
> <
>> NOTE: All email exchanges with Unidata User Support are recorded in the
>> Unidata inquiry tracking system and then made publicly available
>> through the web. If you do not want to have your interactions made
>> available in this way, you must let us know in each email you send to us.
>--
>====================================================================
>Clinton M. Rowe
>Associate Professor
>Meteorology/Climatology Program phone:(402)472-1946
>Department of Geosciences fax:(402)472-4917
>University of Nebraska-Lincoln address@hidden
>
--
**************************************************************************** <
Unidata User Support UCAR Unidata Program <
(303)497-8643 P.O. Box 3000 <
address@hidden Boulder, CO 80307 <
---------------------------------------------------------------------------- <
Unidata WWW Service http://my.unidata.ucar.edu/content/support <
---------------------------------------------------------------------------- <
NOTE: All email exchanges with Unidata User Support are recorded in the
Unidata inquiry tracking system and then made publicly available
through the web. If you do not want to have your interactions made
available in this way, you must let us know in each email you send to us.