20030815: Trouble compiling Gempak

Gerry,

Thge log messages show that you have not installed the Motif developers
package (RPM) for openmotif since you are missing the Xm/* header files.
You need both the libraries and the developers header files to compile locally.

>/usr/local/gempak/GEMPAK5.6/gempak/include/geminc.h:59:22: Xm/XmAll.h: No such
>  file or directory

Steve Chiswell



>From: Gerry Creager N5JXS <address@hidden>
>Organization: Texas A&M University -- AATLT
>Keywords: 200308160155.h7G1tnLd001497

>This is a multi-part message in MIME format.
>--------------090102090106010603030302
>Content-Type: text/plain; charset=us-ascii; format=flowed
>Content-Transfer-Encoding: 7bit
>
>RedHat 9, all security updates are current.
>
>Attached are make.out and the results of 'dmesg'
>
>For now, I'm gonna try the binary.  I prefer compiling from source, so 
>that I can account for idiosyncracies of the individual systems...
>
>TIA,
>gerry
>-- 
>Gerry Creager -- address@hidden
>Texas Mesonet -- AATLT, Texas A&M University   
>Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.847.8578
>Page: 979.228.0173
>Office: 903A Eller Bldg, TAMU, College Station, TX 77843
>
>--------------090102090106010603030302
>Content-Type: text/plain;
> name="dmesg.gemdata"
>Content-Transfer-Encoding: 7bit
>Content-Disposition: inline;
> filename="dmesg.gemdata"
>
>Linux version 2.4.20-19.9 (address@hidden) (gcc version 
> 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Tue Jul 15 17:18:13 EDT 2003
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>On node 0 totalpages: 262128
>zone(0): 4096 pages.
>zone(1): 225280 pages.
>zone(2): 32752 pages.
>Kernel command line: ro root=LABEL=/
>Initializing CPU#0
>Detected 1499.877 MHz processor.
>Console: colour VGA+ 80x25
>Calibrating delay loop... 2994.99 BogoMIPS
>Memory: 1027400k/1048512k available (1358k kernel code, 17528k reserved, 1004k
>  data, 132k init, 131008k highmem)
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 256K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
>CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
>CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 0a
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>mtrr: v1.40 (20010327) Richard Gooch (address@hidden)
>mtrr: detected mtrr type: Intel
>PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=2
>PCI: Using configuration type 1
>PCI: Probing PCI hardware
>Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
>PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
>Starting kswapd
>allocated 32 pages and 32 bhs reserved for the highmem bounces
>VFS: Disk quotas vdquot_6.5.1
>pty: 2048 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ S
> ERIAL_PCI ISAPNP enabled
>ttyS0 at 0x03f8 (irq = 4) is a 16550A
>ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Real Time Clock Driver v1.10e
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>NET4: Frame Diverter 0.46
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH2: IDE controller at PCI slot 00:1f.1
>ICH2: chipset revision 5
>ICH2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
>hda: WDC WD400BB-00CAA1, ATA DISK drive
>blk: queue c03cdfe0, I/O limit 4095Mb (mask 0xffffffff)
>hdc: CD-ROM Drive/F5A, ATAPI CD/DVD-ROM drive
>hdc: Disabling (U)DMA for CD-ROM Drive/F5A
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: attached ide-disk driver.
>hda: host protected area => 1
>hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
>ide-floppy driver 0.99.newide
>Partition check:
> hda: hda1 hda2 hda3
>ide-floppy driver 0.99.newide
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP: Hash tables configured (established 262144 bind 65536)
>Linux IP multicast router 0.06 plus PIM-SM
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 143k freed
>VFS: Mounted root (ext2 filesystem).
>Journalled Block Device driver loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Freeing unused kernel memory: 132k freed
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb-uhci.c: $Revision: 1.275 $ time 17:27:56 Jul 15 2003
>usb-uhci.c: High bandwidth mode enabled
>PCI: Found IRQ 5 for device 00:1f.2
>PCI: Sharing IRQ 5 with 02:03.0
>PCI: Setting latency timer of device 00:1f.2 to 64
>usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 1
>hub.c: USB hub found
>hub.c: 2 ports detected
>PCI: Found IRQ 9 for device 00:1f.4
>PCI: Setting latency timer of device 00:1f.4 to 64
>usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 9
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 2
>hub.c: USB hub found
>hub.c: 2 ports detected
>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
>usb.c: registered new driver hiddev
>usb.c: registered new driver hid
>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <address@hidden>
>hid-core.c: USB HID support drivers
>mice: PS/2 mouse device common for all mice
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
>Adding Swap: 2040244k swap-space (priority -1)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ip_tables: (C) 2000-2002 Netfilter core team
>Intel(R) PRO/100 Network Driver - version 2.2.21-k1
>Copyright (c) 2003 Intel Corporation
>
>PCI: Enabling device 02:06.0 (0000 -> 0003)
>PCI: Found IRQ 10 for device 02:06.0
>PCI: Setting latency timer of device 02:06.0 to 64
>e100: selftest OK.
>divert: allocating divert_blk for eth0
>e100: eth0: Intel(R) PRO/100 Network Connection
>  Hardware receive checksums enabled
>  cpu cycle saver enabled
>
>PCI: Enabling device 02:07.0 (0000 -> 0003)
>PCI: Found IRQ 11 for device 02:07.0
>PCI: Sharing IRQ 11 with 02:08.0
>PCI: Setting latency timer of device 02:07.0 to 64
>e100: selftest OK.
>divert: allocating divert_blk for eth1
>e100: eth1: Intel(R) PRO/100 Network Connection
>  Hardware receive checksums enabled
>  cpu cycle saver enabled
>
>e100: eth0 NIC Link is Up 100 Mbps Full duplex
>Installing knfsd (copyright (C) 1996 address@hidden).
>nfsd: last server has exited
>nfsd: unexporting all filesystems
>ide-floppy driver 0.99.newide
>hdc: attached ide-cdrom driver.
>hdc: ATAPI 48X CD-ROM drive, 128kB Cache
>Uniform CD-ROM driver Revision: 3.12
>cdrom: This disc doesn't have any tracks I recognize!
>
>--------------090102090106010603030302
>Content-Type: text/plain;
> name="make.out"
>Content-Transfer-Encoding: 7bit
>Content-Disposition: inline;
> filename="make.out"
>
>       Creating /usr/local/gempak/GEMPAK5.6/lib/linux
>       Creating /usr/local/gempak/GEMPAK5.6/bin/linux
>Making all in /usr/local/gempak/GEMPAK5.6/gempak
>make[1]: Entering directory `/usr/local/gempak/GEMPAK5.6/gempak'
>making in /usr/local/gempak/GEMPAK5.6/gempak/source
>make[2]: Entering directory `/usr/local/gempak/GEMPAK5.6/gempak/source'
>Making all in /usr/local/gempak/GEMPAK5.6/gempak/source/nxmlib
>make[3]: Entering directory `/usr/local/gempak/GEMPAK5.6/gempak/source/nxmlib'
>gcc -DUNDERSCORE -DLinux -I/usr/local/gempak/GEMPAK5.6/gempak/include -I/usr/X
> 11R6/include  -I/usr/local/gempak/GEMPAK5.6/include -I/usr/X11R6/include -I/u
> sr/X11R6/include -c NuiColorInit.c
>In file included from NuiColorInit.c:1:
>/usr/local/gempak/GEMPAK5.6/gempak/include/geminc.h:59:22: Xm/XmAll.h: No such
>  file or directory
>In file included from /usr/local/gempak/GEMPAK5.6/gempak/include/gemprm.h:122,
>                 from NuiColorInit.c:2:
>/usr/local/gempak/GEMPAK5.6/gempak/include/nmpdef.h:92: parse error before "Bo
> olean"
>/usr/local/gempak/GEMPAK5.6/gempak/include/nmpdef.h:102: parse error before "B
> oolean"
>In file included from /usr/local/gempak/GEMPAK5.6/gempak/include/proto.h:15,
>                 from /usr/local/gempak/GEMPAK5.6/gempak/include/gemprm.h:590,
>                 from NuiColorInit.c:2:
>
>--------------090102090106010603030302--
>