[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
20001213: Trouble installing dcreanal program
- Subject: 20001213: Trouble installing dcreanal program
- Date: Fri, 15 Dec 2000 12:45:46 -0700
Dan,
The file you show is not part of my Makefile installation, so
that is likely where the problems start. The Makeinc.common file
should not have executable statements. What you show is an
executable csh file that sets environmental variables. It is not
the type of file that would be included within a Makefile.
Since you don't have anything that looks like what I created,
the easiest way to compile things is to probably do it by hand.
The following assumes you are building under GEMPAK5.6, with
NetCDF installed under $NAWIPS/netcdf/hpux:
cd $NAWIPS/unidata/ldmbridge/dcreanal
cc -Aa -D_HPUX_SOURCE -DHPUX -DSYSLOG_RETURNS_INT \
-I/home/gempak/GEMPAK5.6/gempak/include \
-I/home/gempak/GEMPAK5.6/gempak/source/ldmlog \
-I/home/gempak/GEMPAK5.6/netcdf/hpux/include \
-c dcreanal.c
fort77 +E4 +E6 -I/home/gempak/GEMPAK5.6/gempak/include \
-I/home/gempak/GEMPAK5.6/gempak/include/HPUX \
-I/home/gempak/GEMPAK5.6/gempak/source/gemlib/na \
-c open_gemgrid.f
fort77 +E4 +E6 -I/home/gempak/GEMPAK5.6/gempak/include \
-I/home/gempak/GEMPAK5.6/gempak/include/HPUX \
-I/home/gempak/GEMPAK5.6/gempak/source/gemlib/na \
-c put_gemgrid.f
fort77 +E4 +E6 -I/home/gempak/GEMPAK5.6/gempak/include \
-I/home/gempak/GEMPAK5.6/gempak/include/HPUX \
-I/home/gempak/GEMPAK5.6/gempak/source/gemlib/na -Wl,+n \
dcreanal.o open_gemgrid.o put_gemgrid.o \
/home/gempak/GEMPAK5.6/lib/hpux/gemlib.a \
/home/gempak/GEMPAK5.6/lib/hpux/ldmlog.a \
/home/gempak/GEMPAK5.6/netcdf/hpux/lib/libnetcdf.a -lm -o dcreanal
I have tested the above under HPUX 11.0B
Steve Chiswell
Unidata User Support
>From: "Dan Stjean" <address@hidden>
>Organization: DOC/NOAA/NWS - National Weather Service
>Keywords: 200012132330.eBDNUto28695
>This is a multi-part message in MIME format.
>--------------5765B1A10091C2FFDC5BF318
>Content-Type: text/plain; charset=us-ascii
>Content-Transfer-Encoding: 7bit
>
>Steve,
>
>I'm working on the installation of dcreanal on our HP-UX machine. Spent
>a few hours successfully installing the netcdf library package into
>GEMPAK, but can't get the dcreanal Make file to spit out anything more
>than the following error:
>
>gempak% make clean
>Make: Must be a separator on rules line 32. Stop.
>
>I've pored over the dozen or so emails you've received and responded to
>about dcreanal, but no one has mentioned this particular problem. The
>Makefile is unchanged from the original unpack, but I will attach a copy
>of my Makeinc.common file, so you might see if that's where the error
>lies. At this point I can't tell if it's in the Makefile or the .common
>file. I've had another pair of eyes in the office look at it, but we
>don't see anything obvious jumping out at us. I'll be happy to provide
>more information if necessary.
>
>Thanks in advance for any help on this.
>
>Dan St. Jean
>NWS Burlington VT
>802.658.0207
>address@hidden
>
>--------------5765B1A10091C2FFDC5BF318
>Content-Type: text/plain; charset=us-ascii;
> name="Makeinc.common"
>Content-Transfer-Encoding: 7bit
>Content-Disposition: inline;
> filename="Makeinc.common"
>
>#!/bin/csh -f
>#-------------------------------------------------------
>#
># cshrc file for NAWIPS usage
>#
># Please read all the comments below and when requested,
># make changes to reflect your system set-up.
>#
># Log
># R.Miller/NWS ??
># P.Bruehl/NWS 11/95 Revised for 5.2.1, documented
># P.Bruehl/NWS 10/96 Updated for 5.4
># P.Bruehl/NWS 12/96 LINUX version
># R.Rozumalski 01/00 Consolidated HPUX and LINUX versions
>#-------------------------------------------------------
>#
># Note: the environment variable $NA_OS must be set
># to the operating system (i.e. hpux) before this file is
># sourced. Normally, it is set in Common.cshrc.
>#
>
># You SHOULD NOT have to edit anything in this file. The only
># exception is if you have the modsnd distribution located
># somewhere other than $NAWIPS/modsnd. If this is the case
># either move the modsnd directory to $NAWIPS or edit the appropriate
># lines below.
>#
>
># Make sure $NAWIPS is defined in Common.cshrc file.
>#
>if ( ! $?NAWIPS) then
> setenv NAWIPS `pwd`
> echo " "
> echo "NAWIPS is not correctly set. Please define"
> echo "NAWIPS in your Common.cshrc file."
> echo " "
> echo "Using $NAWIPS for now."
> echo " "
>endif
>#
># Define the root directory of the NAWIPS distribution
>#
> setenv GARP_PATH $NAWIPS/garp/config
>#
># Make sure NAWIPS directory exists
>#
>if ( ! -d $NAWIPS ) then
> echo "Can not find NAWIPS distribution--Check directory and"
> echo "modify Nawips.cshrc"
> unsetenv NAWIPS
> exit
>endif
>
>#
># Define the root of the data directory tree--only if it has
># not previously been defined. Normally this directory is
># defined in Common.cshrc
>#
># If $METDAT has NOT been defined, this sets it to the sample
># data directory tree included in the NAWIPS 5.2.1 distribution
>
>if ( ! $?METDAT) setenv METDAT $NAWIPS/metdat
>
>#
># Add NAWIPS executables & scripts to the end of the existing path
>#
>
>set path = ( $path $NAWIPS/exe/${NA_OS} $NAWIPS/exe/scripts/soosac $NAWIPS/ex
> e/scripts/comet $NAWIPS/exe/scripts/nawips $NAWIPS/exe/scripts/ez )
>
>#
># If you have installed MODSND then include the directory in your path.
># If the location of modsnd on your machine is not in the same place as
># indicated below, then change it.
>#
>if ( -d users/gempak/modsnd ) then
> set path = ( $path $users/gempak/modsnd )
>endif
>
>#
># Add NAWIPS to the X applications resource path.
>#
>set xresources=""
>
>if ( $NA_OS == "linux" ) then
>
> if ( -d $NAWIPS/resource.linux ) then
> set xresources="$NAWIPS/resource.linux/%N"
> endif
> setenv GEMMAPS $NAWIPS/gempak/maps/decmaps
>
>else if ( $NA_OS == "hpux" ) then
>
> if ( -d $NAWIPS/resource ) then
> set xresources="$NAWIPS/resource/%N"
> endif
> setenv GEMMAPS $NAWIPS/gempak/maps
>
>endif
>
>#
># NAWIPS env variables.
>#
># No need to change these, unless you have a good reason
>#
> setenv NAWIPS_EXE $NAWIPS/exe/$NA_OS
> setenv NAWIPS_LIB $NAWIPS/lib/$NA_OS
> setenv NAWIPS_INC $NAWIPS/include
> setenv NAWIPS_TABLES $NAWIPS/tables
> setenv NAWIPS_HELP $NAWIPS/help
>
>#
># GUI Program specific variables
>#
> setenv NTRANS $NAWIPS/nprogs/ntrans
> setenv AFOS $NAWIPS/nprogs/afos
> setenv AFOS_BITMAPS $AFOS/bitmaps
> setenv NSAT $NAWIPS/nprogs/nsat
> setenv NWX $NAWIPS/nprogs/nwx
> setenv NTL $NAWIPS/nprogs/ntl
>
>#
># GEMPAK specific variables
>#
> setenv GEMPAK $NAWIPS/gempak
> setenv GEMPAKHOME $GEMPAK
> setenv GEMEXE $NAWIPS_EXE
> setenv GEM_OS $NA_OS
> setenv GEMDATA $GEMPAK/data
> setenv GEMPDF $GEMPAK/pdf
> setenv GEMNTS $GEMPAK/nts
> setenv GEMTBL $GEMPAK/tables
> setenv GEMERR $GEMPAK/error
> setenv GEMHLP $GEMPAK/help
> setenv GEMPARM $GEMPAK/parm
> setenv NETCDF $NAWIPS/netcdf-3.4/lib/libnetcdf.a
> setenv NETCDFINC $NAWIPS/netcdf-3.4/include
>
>#
># Data
>#
> setenv NADATA $METDAT
> setenv MODEL $NADATA/gempak/grids
> setenv NTRANS_META $NADATA/meta
> setenv SAT $NADATA/images/sat
> setenv GOES7 $SAT/GOES-7
> setenv GOES8 $SAT/GOES-8
>
> setenv AFOS_DATA $NADATA/raw/afos/afos_data
> setenv AFOS_BIN $NADATA/raw/afos/afos_bin
> setenv AFOS_LOG $NADATA/raw/afos/afos_log
> setenv AFOS_ALARMS $NADATA/raw/afos/afos_alarms
>
> setenv OBS $NADATA/weather
> setenv SAO_GEM_DATA $NADATA/gempak/surface
> setenv TEXT_DATA $NADATA/nwx
> setenv NWX_TABLES $NAWIPS/tables/nwx
>
># Done
>
>--------------5765B1A10091C2FFDC5BF318--
>