Robb,
I've been registered to address@hidden and I was sending my
questions to 'address@hidden' all the time. I don't know how
it is being handled from there and how it falls into your spam. I
started to think that you were ignoring my messages. <:)
After sending this message, I made a little change in my code to read
Grib1GridDefinitionSection.params field to get HashMap of the
parameters. This helped me to get all the information I needed. However,
in the grib1 index file, the Dx and Dy fields of the grid definition
section was still displaying wrong numbers. My colleague and I started
looking into the Grib1GridDefinitionSection.java. In the section where
the information obtained from octets 24-25 (Dx) and octets 26-27(Dy or
np), they were being read as "short". We changed them to read by using
GribNumbers.int2 method (please see the following code snippet). It
started spitting out the correct numbers.
Sincerely,
Pelin Bali.
case 202 :
// octets 18-20 (La2 - latitude of last grid point)
lat2 = GribNumbers.int3(raf) / 1000.0;
// octets 21-23 (Lo2 - longitude of last grid point)
lon2 = GribNumbers.int3(raf) / 1000.0;
// octets 24-25 (Dx - Longitudinal Direction Increment )
//------------------------------------------------------
// This is where we made the change.
//-------------------------------------------------------
//dx = raf.readShort() / 1000.0;
dx = GribNumbers.int2(raf) / 1000.0;
// octets 26-27 (Dy - Latitudinal Direction Increment )
// Np - parallels between a pole and the
equator
if (type == 4) {
// np = raf.readShort();
np = GribNumbers.int2(raf);
} else {
// dy = raf.readShort() / 1000.0;
dy = GribNumbers.int2(raf) / 1000.0;
}
//-----------------------------------------------------------
// End of our changes.
//
----------------------------------------------------------
// octet 28 (Scanning mode) See Table 8
scan = raf.read();
// octet 29-32 reserved
reserved = raf.readInt();
if (P_VorL != 255) {
if( NV == 0 || NV == 255 ) {
getPL(raf);
} else {
getPV(NV, raf);
}
}
break; // end Latitude/Longitude grids
-----Original Message-----
From: Robb Kambic [mailto:address@hidden]
Sent: Wednesday, August 27, 2008 3:20 PM
To: Bali, Pelin
Cc: decoders
Subject: Re: Fw: decoders] Grib1 Indexer and GDS info (fwd)
Bali,
your support msg has been sitting in my spam folder for months now, i
just
clean it out so that;s the reason for delay. There is an online support
on unidata's home page and it's more dependable.
I going to address your msg in a general manner until we get to the same
level. The Grib decoder package was meant to only be a low level API,
the
data resolution that you are looking for would be easier to use a
ToolsUI
program the uses the Grib package. Actually i think you should be able
to
do the refinement w/o doing any coding. The ToolsUI program is located
at:
https://www.unidata.ucar.edu/software/netcdf-java/
It will read in the file and it has options to select areas of data, the
documentation is a little scarce but intuitive. The is also NCML that
will
let you manipulate the output files.
On the other hand:
The grib package provides a dump, indexer and getData program that can
be
used as templates to get the info you were looking for. There are
javadocs
on all these routines on the decoders page.
There is also a display package IDV that could do the data processing.
Hope this helps.
RObb...
---------- Forwarded message ----------
Date: Tue, 5 Aug 2008 10:59:21 -0400
From: "Bali, Pelin" <address@hidden>
To: address@hidden
Subject: decoders] Grib1 Indexer and GDS info
I am using the Grib1Indexer to read the Grib file. I need to get the
information lat, long, and nxny (145 X 73) as indicated below. I tried
to use Index.GdsRecord, however I wasn't successful. Although I could
get start points of lat and long, I wasn't able to get neither
resolution nor the end points of lat & long by using gdsRecord. Could
you please show me some that direction on how to get this information?
Thanks in advance.
------------
rec 98:1554711:date 2008080400 TMP kpds5=11 kpds6=105 kpds7=2
levels=(0,2) grid=16 2 m above gnd 24hr fcst:
TMP=Temp. [K]
timerange 0 P1 24 P2 0 TimeU 1 nx 145 ny 73 GDS grid 0 num_in_ave 0
missing 0
center 1 subcenter 0 process 45 Table 1 scan: WE:SN winds(N/S)
latlon: lat -90.000000 to 90.000000 by 2.500000 nxny 10585
long 0.000000 to 360.000000 by 2.500000, (145 x 73) scan 64
mode 128 bdsgrid 1--
The following is how I use the grib indexer to get the grib data.
RandomAccessFile raf = new RandomAccessFile(filePath, "r");
Grib1Indexer indexer = new Grib1Indexer();
PrintStream ps = new PrintStream(indexPath);
indexer.writeFileIndex(raf, ps, false );
Index index = new Index();
boolean rc = index.open(indexPath);
ArrayList gribIndexRecords = index.getGribRecords();
ArrayList<GdsRecord> gdsRecords = index.getHorizCoordSys();
//
// Build a hashmap for the GDS keys.
//
java.util.HashMap gdsMap = new java.util.HashMap();
for (int a = 0; a < gdsRecords.size(); a++) {
GdsRecord gdsRecord = gdsRecords.get(a);
gdsMap.put(gdsRecord.gdsKey, gdsRecord);
}
for (Iterator it = gribIndexRecords.iterator (); it.hasNext (); ) {
zz++;
GribRecord gribRecord = (GribRecord)it.next();
if (gribRecord != null) {
//
// Select only temperature.
//
if (gribRecord.paramNumber == 11 ) {
if (gribRecord.levelType1 == 105) {
if (gribRecord.levelValue1 == 2.0) {
if (gribRecord.forecastTime ==
24) {
Grib1Data grib1data =
new Grib1Data(raf);
if (gdsMap.get(gribRecord.gdsKey) !=
null) {
GdsRecord gds =
(GdsRecord)gdsMap.get(gribRecord.gdsKey);
System.out.println("Dx: " + gds.dx);
System.out.println("Dy: " + gds.dy);
System.out.println("Grid Shape Code: " + gds.grid_shape_code);
System.out.println("Grid Type: " + gds.grid_type);
System.out.println("La1: " + gds.La1);
System.out.println("LaD: " + gds.LaD);
System.out.println("Latin1: " + gds.latin1);
System.out.println("Latin2: " + gds.latin2);
System.out.println("Lo1: " + gds.Lo1);
System.out.println("LoV: " + gds.LoV);
System.out.println("Major Axis Earth " + gds.major_axis_earth);
System.out.println("Minor Axis Earth " + gds.minor_axis_earth);
System.out.println("Nx: " + gds.nx);
System.out.println("Ny: " + gds.ny);
System.out.println("Radius Spherical Earth: " +
gds.radius_spherical_earth);
System.out.println("Resolution: " + gds.resolution);
System.out.println("Winds: " + gds.winds);
}
float[] arr =
grib1data.getData(gribRecord.offset1, gribRecord.decimalScale,
gribRecord.bmsExists);
} // hour 24
} // 2m
} //above ground
} // end of temperature
} // grib record is not null
} // end for
Sincerely,
Pelin Bali
WeatherPredict Consulting, Inc.
3200 Atlantic Avenue, Suite 114
Raleigh, NC 27604
Phone (Direct): 919-239-8833
Phone (Main) : 919-876-3633
Fax : 919-876-4469
"Imagination will often carry us to worlds that never were.
But without it we go nowhere." - Carl Sagan (Cosmos - 1980)
========================================================================
=======
Robb Kambic Unidata Program Center
Software Engineer III Univ. Corp for Atmospheric
Research
address@hidden WWW:
http://www.unidata.ucar.edu/
========================================================================
=======