[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: New to this...



On Thu, 20 Jul 2006, Wade Shumaker wrote:

> Rob,
>
> Thanks. I appreciate the info. It sounds like even if I do run into this
> issue again, I can just rerun in 10 min and all should be well.


Wade,

some of the models are over a half a gig, so it takes  up to 2
hours for them to completely arrive. so you should still compare the file
sizes until this issue is resolved.  Ethan also wrote you with some reason
why you had some problems downloading the data.

robb...

>
> Wade Shumaker
> The Pennsylvania State University
> 332 Information Sciences and Technology Building
> University Park, PA 16802-6823
> 814-865-7398
> -----Original Message-----
> From: Robb Kambic [mailto:address@hidden]
> Sent: Wednesday, July 19, 2006 4:27 PM
> To: Wade Shumaker
> Cc: decoders; support-thredds
> Subject: RE: New to this...
>
> On Fri, 14 Jul 2006, Wade Shumaker wrote:
>
> > Robb,
> >
> > Thanks again. I've successfully dl'ed data from the server. A couple
> > questions... here's the setup I've been using:
> > West Lon: 60
> > East Lon: 72
> > N Lat: 39
> > S Lat: 29
> > Hrs: 0-24
>
> Wade,
>
> west longitude is negative and east is positive, so afghanistan would be
>
> west lon 60 east lon 72
> N Lat: 39 S Lat: 29
>
> i did a quick test and the data is over afghanistan.
> >
> > - When using the 1 deg model, I can successfully get any of the fields
> > in the first set of grids (N5_geopot... thru
> volumetric_soil_moisture),
> > but as soon as I add anything from the 2nd set, I get an error saying
> > "Invalid Lat/Lon Range".
>
>
> i think the problem is that the file wasn't completely arrived at the
> motherlode site before you tried to access it. this is problem that we
> are
> currently fixing. i just did a test and got parameter
> N5-wave_geopot_height_anomaly grid 1 and  Albedo from grid 2, and it
> worked ok.
> one strang thing that happened was when i downloaded the files, i got 2
> files GFS_Global_onedeg_20060719_1200.grib1.nc with nothing in it and
> GFS_Global_onedeg_20060719_1200.grib1.nc.part with the data. i'll check
> on
> this, it seems some process didn't complete.
>
> >
> > - When I try the exact same setup numbers w/ the 2.5 deg model, I
> can't
> > get any data, not even anything from the first set of grids
> >
> > I suspect I'm not understanding how the lat/lon works, and possibly
> the
> > data I DID get to work isn't for the area I'm interested in
> > (Afghanistan).
> >
>
> i suspect the above problems are the same as the one stated. you might
> look at the file sizes before downloading the data. if the file isn't
> close in size to the previous one, then it only a partial file. the
> latest
> tab always picks the last file even if it's only a partial file.
>
> robb...
>
>
> > Thanks,
> >
> > Wade Shumaker
> > The Pennsylvania State University
> > 332 Information Sciences and Technology Building
> > University Park, PA 16802-6823
> > 814-865-7398
> >
> > -----Original Message-----
> > From: Robb Kambic [mailto:address@hidden]
> > Sent: Thursday, July 13, 2006 6:28 PM
> > To: Wade Shumaker
> > Cc: address@hidden; decoders
> > Subject: Re: New to this...
> >
> > On Thu, 13 Jul 2006, Wade Shumaker wrote:
> >
> > > I'm brand new to all this....
> > >
> > >
> > >
> > > I recently began working on 3d visualization at Penn State. I am
> > trying
> > > to locate and download weather data to import into vGeo, a 3d vis
> > > application. I found the data, and I have the grib file.
> > >
> >
> > Wade,
> >
> > Welcome to the world of weather data.  Actually there is a quicker
> > method
> > of obtaining a netCDF file then downloading the grib files and
> > converting
> > them to netCDF.  There is a NetcdfServer that is available for most
> NCEP
> > Model Data plus other data. To obtain the data go to:
> >
> > http://motherlode.ucar.edu:8080/thredds/catalog.html
> >
> > click on: NCEP Model Data
> > select the desired Model entries until the data entries appear.
> > select a data entry
> >
> > a THREDDS Data Server page with different Access options will be
> > shown. The bottom option is the NetcdfServer that permits one to
> select
> > the desired parameters and forecast times. After your selection is
> made
> > and submitted, a netCDF file can be saved to you disk. This process is
> > much easier then getting the raw grib and doing the conversion
> yourself.
> >
> >
> > Robb....
> >
> >
> > >
> > >
> > > I need to convert grib to netcdf so I dl'ed and unzipped the
> > > decoders-4.1.0.tar.Z file. What do I do next? I see no .exe files so
> > how
> > > do I use gribtonc?
> > >
> > >
> > >
> > > Thanks for your patience in helping me get started in this new and
> > > exciting venture.
> > >
> > >
> > >
> > > Wade Shumaker
> > >
> > > The Pennsylvania State University
> > >
> > > 332 Information Sciences and Technology Building
> > >
> > > University Park, PA 16802-6823
> > >
> > > 814-865-7398
> > >
> > >
> > >
> > >
> >
> >
> ========================================================================
> > =======
> > Robb Kambic                            Unidata Program Center
> > Software Engineer III                          Univ. Corp for Atmospheric
> > Research
> > address@hidden                 WWW:
> > http://www.unidata.ucar.edu/
> >
> ========================================================================
> > =======
> >
>
> ========================================================================
> =======
> Robb Kambic                              Unidata Program Center
> Software Engineer III                    Univ. Corp for Atmospheric
> Research
> address@hidden                   WWW:
> http://www.unidata.ucar.edu/
> ========================================================================
> =======
>

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================