[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20051117: NetCDF decoder pqact entries



On Wed, 23 Nov 2005, Mark Seefeldt wrote:

> Robb,
>
> The tip on searching for the process ID in the log file was excellent.
> It does not show up on any recent log files, but it does show up on the
> file from when the ldm was restarted:
> ldmd.log.5:Nov 18 20:20:46 foehn pqact[7584] NOTE: Starting Up
> ldmd.log.5:Nov 18 20:20:46 foehn pqact[7584] NOTE: Configuration-file
> "etc/pqact.netcdf" has no entries. You should probably not start this
> program instead.

Mark,

the good news is your ldmd.conf exec line is correct, the bad new is that
the etc/pqact.netcdf entries are not correct. you did see the note below
about the entries needing tabs instead of spaces in the entries?  i loaded
the entries onto the web page, at:
http://www.unidata.ucar.edu/software/decoders/index.html
there's a tag "LDM pqact entries".  Don't copy the page, use the
right mouse button and the save command to get the page. once you download
the page, test to make sure it's correct.

% ldmadmin pqactcheck <fullPathTo>/pqact.netcdf


this should verify that the pqact.netcdf file is correct.

hopefully this works for you because i'll be out of town until dec 4. if
you are still having problems, send email to address@hidden
stating you are having pqact problems.

robb...
>
> I have attached the ldmd.conf and the pqact.netcdf files to provide some
> help.  It appears to me that there are entries in pqact.netcdf, and that
> it is properly called from ldmd.conf.  Obviously something is not write.
>
> To verify that the spelling jives, I did a listing of the etc directory:
> [ldm@foehn etc]$ ls -l
> total 344
> drwxr-xr-x  2 ldm met-apps  4096 Apr 25  2005 6.1.0
> -rw-r--r--  1 ldm met-apps  3116 Apr 22  2005 ldmadmin-pl.conf
> -rw-r--r--  1 ldm met-apps  3118 Apr 22  2005 ldmadmin-pl.conf.orig
> -rw-r--r--  1 ldm met-apps  4570 Nov 17 17:47 ldmd.conf
> -rw-r--r--  1 ldm met-apps  4361 May  9  2005 ldmd.conf.20050509
> drwxr-xr-x  2 ldm met-apps  4096 Nov 17 17:55 netcdf
> -rw-r--r--  1 ldm met-apps  1622 Nov 10 14:19 netcheck.conf
> -rw-r--r--  1 ldm met-apps  1622 Nov 10 14:19 netcheck.conf.dist
> -rw-r--r--  1 ldm met-apps  3970 Nov 10 15:50 pqact.conf
> -rw-r--r--  1 ldm met-apps  3966 May  2  2005 pqact.conf1
> -rw-r--r--  1 ldm met-apps  3965 May  2  2005 pqact.conf2
> -rw-r--r--  1 ldm met-apps 86663 Nov 10 12:20 pqact.gempak
> -rw-r--r--  1 ldm met-apps 82423 Apr 25  2005 pqact.gempak.5.8.1
> -rw-r--r--  1 ldm met-apps 86663 Nov 10 12:20 pqact.gempak.5.8.3a
> -rw-r--r--  1 ldm met-apps  4216 Nov 17 17:55 pqact.netcdf
> -rw-r--r--  1 ldm met-apps  3771 Nov 17 16:33 pqact.netcdf.unidata
> -rw-r--r--  1 ldm met-apps   668 Nov 10 16:11 scour.conf
> -rw-r--r--  1 ldm met-apps   623 Nov 10 14:19 scour.conf.dist
>
> Please let me know as to the other suggestions as to where I should look
> for problems.
>
> Thanks
>
> Mark
>
>
> Robb Kambic wrote:
> > On Mon, 21 Nov 2005, Mark Seefeldt wrote:
> >
> >> Robb,
> >>
> >> Thank you for the NetCDF decoder pqact entries.  I am currently not
> >> producing any of the output files.
> >>
> >> Information:
> >> -LDM 6.4.3 on a Red Hat Enterprise Linux v.4
> >> -installed:
> >>    netcdf-3.6.0-p1
> >>    netcdf-perl-1.2.3
> >>    udunits-1.12.4
> >>    decoders-4.0.0
> >> -I placed the pqact entries into a separate pqact file named
> >> pqact.netcdf.  This file is attached.
> >> -The pqact.netcdf file is then called from ldmd.conf with the following:
> >>    exec    "pqact etc/pqact.netcdf"
> >> -When I do a process listing I see:
> >>    ldm       7584  7580  0 Nov18 ?        00:12:38 pqact etc/pqact.netcdf
> >>
> >> Are there any log files or other places where I can start looking to
> >> find out why none of the netcdf files are being produced?
> >
> > Mark,
> >
> > the first place to look is the ~ldm/logs/ldmd.log file, the pqact will
> > send it errors to it. one can track the error by looking at the PID of the
> > pqact etc/pqact.netcdf process.
> >
> > also check the pqact.netcdf that there are tabs not spaces between entry
> > parts because spaces could be part of pattern action. ie.
> >
> > DDS|IDS<tab here>^S(A....|P....|XUS8.) .... ([0-3][0-9])
> > <tab here>PIPE<tab here>decoders/metar2nc.new1
> > <tab here>etc/metar.cdl.new1
> > <tab here>data/pub/decoded/netcdf/surface/metar
> >
> > make sure all the decoder table files and cdl files are in the ~ldm/etc
> > directory.  they are located in the ~/etc directory in the build location.
> >
> > from the ldm home directory, run the decoder from command line, ie
> >
> > % decoders/metar2nc.new1 etc/metar.cdl.new1
> > data/pub/decoded/netcdf/surface/metar < <raw data file>
> >
> > above is on one line
> >
> >
> > robb...
> >
> >
> >> Thanks
> >>
> >> Mark Seefeldt
> >>
> >> Robb Kambic wrote:
> >>> On Thu, 17 Nov 2005, Unidata Support wrote:
> >>>
> >>>> Robb,
> >>>>
> >>>> See second paragraph for request of pqact entries for NC decoders 4.0.0.
> >>>>
> >>>> ------- Forwarded Message
> >>>>
> >>>>> To: Unidata Support <address@hidden>
> >>>>> From: Mark Seefeldt <address@hidden>
> >>>>> Subject: NetCDF decoder pqact entries
> >>>>> Organization: UCAR/Unidata
> >>>>> Keywords: 200511172016.jAHKGG7s010277
> >>>> I am currently running LDM 6.4.3.  I have also intalled GEMPAK 5.8.3a.
> >>>> I used the gen_pqact.csh script to create a pqact file to create the
> >>>> GEMPAK files.  All appears to be working very well with that.
> >>>>
> >>>> I have recently installed the NetCDF Decoders 4.0.0 (along with the
> >>>> necessary netCDF, UDUNITS, and Perl-netCDF packages.  I would now like
> >>>> to create a pqact file/entries for the netCDF files.  I have discovered
> >>>> the file gribtonc.entries which appears to have the necessary entries
> >>>> for the GRIB files.  Is this correct?  Other than making changes for the
> >>>> local filesystem, is there anything else that I need to do to implement
> >>>> these pqact entries?  Are there any similar sample entries for the
> >>>> non-GRIB products?
> >>>
> >>> Mark,
> >>>
> >>> the documentation was sent out with the release, maybe i should include it
> >>> some where on the web page.  i'll attach the list of pqact actions for
> >>> both the text bulletions and the model files.
> >>>
> >>> robb...
> >>>
> >>>
> >>>
> >>>> If there is a document already present to answer these questions, feel
> >>>> free to point me that direction.  I was not able to find any in my 
> >>>> search.
> >>>>
> >>>> Thanks
> >>>>
> >>>> Mark
> >>>>
> >>>> --
> >>>> NOTE: All email exchanges with Unidata User Support are recorded in the
> >>>> Unidata inquiry tracking system and then made publicly available
> >>>> through the web.  If you do not want to have your interactions made
> >>>> available in this way, you must let us know in each email you send to us.
> >>>>
> >>>> ------- End of Forwarded Message
> >>>>
> >>> ===============================================================================
> >>> Robb Kambic                                  Unidata Program Center
> >>> Software Engineer III                        Univ. Corp for Atmospheric 
> >>> Research
> >>> address@hidden               WWW: http://www.unidata.ucar.edu/
> >>> ===============================================================================
> >>>
> >>>
> >>> ------------------------------------------------------------------------
> >>>
> >>> #
> >>> # surface data in netCDF format
> >>> #
> >>> # metar decoder, creates NetCDF files formated 
> >>> Surface_METAR_yyyymmdd_hh00.nc
> >>> # All aviation reports including metar tests. old netcdf file format
> >>> DDS|IDS   ^S(A....|P....|XUS8.) .... ([0-3][0-9])
> >>>   PIPE    decoders/metar2nc
> >>>   etc/metar.cdl
> >>>   data/pub/decoded/netcdf/surface/metarold
> >>> #
> >>> # metar decoder, creates NetCDF files with new CDL format on a daily basis
> >>> # formated data/decoded/yyyymmdd_metar.nc
> >>> DDS|IDS   ^S(A....|P....|XUS8.) .... ([0-3][0-9])
> >>>   PIPE    decoders/metar2nc.new1
> >>>   etc/metar.cdl.new1
> >>>   data/pub/decoded/netcdf/surface/metar
> >>> #
> >>> # upper air perl decoder
> >>> DDS|IDS   ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])
> >>>   PIPE    decoders/ua2nc
> >>>   etc/raob.cdl
> >>>   data/pub/decoded/netcdf/upperair
> >>> #
> >>> # buoy reports in yymmddhh_buoy.nc decoded into NetCDF format
> >>> DDS|IDS   ^S[NS].... .... ([0-3][0-9])
> >>>   PIPE    decoders/buoy2nc
> >>>   etc/buoy.cdl
> >>>   data/pub/decoded/netcdf/surface/buoy
> >>> #
> >>> # Synoptic reports in yymmddhh_syn.nc decoded into NetCDF format
> >>> DDS|IDS   ^SM.... .... ([0-3][0-9])
> >>>   PIPE    decoders/syn2nc
> >>>   etc/syn.cdl
> >>>   data/pub/decoded/netcdf/surface/synoptic
> >>> #
> >>> # grid data in netCDF format
> >>> #
> >>> # GFS grid on Lambert conformal CONUS grid replacing avn-q
> >>> HRS       ^Y.Q... KWB. (..)(..).*/m(AVN|SSIAVN|GFS|SSIGFS)
> >>>   PIPE    decoders/gribtonc
> >>>   etc/gfs_211.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/GFS/CONUS_80km/GFS_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # GFS grid on thinned grids, interpolated to global 5.0 x 2.5 regular grid
> >>> HRS       ^H.[I-P]... KWB. (..)(..).*/m(AVN|SSIAVN|GFS|SSIGFS)
> >>>   PIPE    decoders/gribtonc
> >>>   -q "lin,dlat=2.5,dlon=5.0" etc/gfs_37-44.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/GFS/Global_5x2p5deg/GFS_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # ECMWF grid on global 2.5 x 2.5 degree grid
> >>> HRS       ^H.[A-L]... ECMF (..)(..)
> >>>   PIPE    decoders/gribtonc
> >>>   etc/ecmwf_1-12.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/ECMWF/Global_2p5/ECMWF_Global_2p5_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # ETA grid on Lambert conformal CONUS grid
> >>> HRS       ^Y.Q... KWB. (..)(..).*/m(ETA|NAM)
> >>>   PIPE    decoders/gribtonc
> >>>   etc/eta_211.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/NAM/CONUS_80km/NAM_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # GFS grid on global 5.0 x 5.0 degree grid
> >>> HRS       ^H.[EF]... KWB. (..)(..)
> >>>   PIPE    decoders/gribtonc
> >>>   etc/gfs_25-26.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/GFS/Extended_Global_5p0deg/GFS_Extended_Global_5p0deg_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # NGM grid on Lambert conformal CONUS grid
> >>> #HRS      ^Y.Q... KWB. (..)(..).*/mNGM
> >>> # PIPE    decoders/gribtonc
> >>> # etc/ngm_211.cdl
> >>> # 
> >>> data/pub/decoded/netcdf/grid/NCEP/NGM/CONUS_80km/NGM_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # NOW and PWAV grids on global 5.0 x 2.5 degree grids
> >>> HRS       ^H.[A-D]... .... (..)(..).*(/mNOW|/mPWAV)
> >>>   PIPE    decoders/gribtonc
> >>>   etc/ocean_21-24.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/OCEAN/Global_5x2p5deg/OCEAN_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # RUC grid on Lambert conformal CONUS grid
> >>> HRS       ^[YZ].Q... KWB. (..)(..).*/mRUC
> >>>   PIPE    decoders/gribtonc
> >>>   etc/ruc_211.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/RUC/CONUS_80km/RUC_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # RUC2 grid on Lambert conformal CONUS grid
> >>> HRS       ^Y.W... KWB. (..)(..).*/mRUC2
> >>>   PIPE    decoders/gribtonc
> >>>   etc/ruc2_236.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/RUC2/CONUS_40km/RUC2_CONUS_40km_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # SST grid on global 5.0 x 2.5 degree grids
> >>> HRS       ^H.[A-D]... .... (..)(..).*/mSST
> >>>   PIPE    decoders/gribtonc
> >>>   etc/sst_21-24.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/SST/Global_5x2p5deg/SST_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >>> # SST grid on global 2.0 x 2.0 degree grid
> >>> HRS       ^H.[T-W]... .... (..)(..).*/mSST
> >>>   PIPE    decoders/gribtonc
> >>>   etc/sst_61-64.cdl
> >>>   
> >>> data/pub/decoded/netcdf/grid/NCEP/SST/Global_2x2deg/SST_Global_2x2deg_(\1:yyyy)(\1:mm)\1_\200.nc
> >>> #
> >
> > ===============================================================================
> > Robb Kambic                            Unidata Program Center
> > Software Engineer III                          Univ. Corp for Atmospheric 
> > Research
> > address@hidden                 WWW: http://www.unidata.ucar.edu/
> > ===============================================================================
> >
> >
>

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================