[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: udunits and netCDF
- Subject: RE: udunits and netCDF
- Date: Fri, 28 Jan 2005 14:46:41 -0700 (MST)
On Fri, 28 Jan 2005, Latimer, S wrote:
> I tried using the following command by using your example below (the filename
> is rucs.000327.rucs.T23Z.PGrbAnl):
>
> [decoders-3.0.7]# bin/gribtocdl -v rucs.000327.rucs.T23Z.PGrbAnl >
> rucs.000327.rucs.T23Z.cdl
>
> with the following error:
>
> bash: bin/gribtocdl: No such file or directory
stephen,
cd to the bin dir and do a ls, sent me the results. also send me the
results of echo $PATH and pwd. if there is nothing in bin cd src/gribtonc
and do the above.
robb...
>
> Stephen
>
> Stephen Latimer
> Meteorology Graduate Student
> Texas Tech University ATMO
> Lubbock, TX 79409
>
>
>
> -----Original Message-----
> From: Robb Kambic [mailto:address@hidden]
> Sent: Fri 1/28/2005 14:20
> To: Latimer, S
> Cc: decoders
> Subject: RE: udunits and netCDF
>
> On Fri, 28 Jan 2005, Latimer, S wrote:
>
> > When I tried the 'setenv UDUNITS_PATH /etc/udunits.dat' command, Linux gave
> > the error: 'command not found'.
>
> must be using a bash shell, try:
>
> % UDUNITS_PATH="substitute path to udunits.dat here";export UDUNITS_PATH
>
> % ls $UDUNITS_PATH
>
> should be ls of udunits.dat
>
> robb...
>
>
> >
> > Stephen
> >
> >
> > Stephen Latimer
> > Meteorology Graduate Student
> > Texas Tech University ATMO
> > Lubbock, TX 79409
> >
> >
> >
> > -----Original Message-----
> > From: Robb Kambic [mailto:address@hidden]
> > Sent: Fri 1/28/2005 12:50
> > To: Latimer, S
> > Cc: decoders
> > Subject: RE: udunits and netCDF
> >
> > On Fri, 28 Jan 2005, Latimer, S wrote:
> >
> > > Robb,
> > >
> > > I did as you prescribed except in the CUSTOMIZE file the UDUNITS_PATH
> > > did not exist in the file. Also, there was not a complaint about perl
> > > after executing 'make test'. There were no problems doing the make
> > > install command.
> >
> > it appears as the decoders were build sufficiently but before you can run
> > the decoders, UDUNITS_PATH needs to be set.
> >
> > % setenv UDUNITS_PATH (udunits install path)/etc/udunits.dat
> >
> > to check, do a
> >
> > % ls $UDUNITS_PATH
> >
> > now you can run the decoders, first create a cdl , netcdf template file
> >
> > decoder path location:
> >
> > bin/gribtocdl -v <raw grib file> > model.cdl
> >
> > bin/gribtonc -l - model.cdl model.nc < model.raw
> >
> > you might want to copy the netcdf/bin/ncgen to decoders/bin dir
> > if gribtonc is having a problem finding it.
> >
> > robb...
> >
> > >
> > > Stephen
> > >
> > > Stephen Latimer
> > > Meteorology Graduate Student
> > > Texas Tech University ATMO
> > > Lubbock, TX 79409
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Robb Kambic [mailto:address@hidden]
> > > Sent: Fri 1/28/2005 11:58
> > > To: Latimer, S
> > > Cc: decoders
> > > Subject: RE: udunits and netCDF
> > >
> > >
> > >
> > >
> > > stephen,
> > >
> > > attached is a binary dist for netcdf. after gunzipping and untarring,
> > > then lets move onto the decoders release.
> > >
> > > in the src/CUSTOMIZE file remove the "# " and set the path correctly for
> > > the vars CPP_NETCDF, LD_NETCDF, CPP_UDUNITS, LD_UDUNITS and
> > > UDUNITS_PATH. paths are where the netcdf and udunits are installed on
> > > your
> > > machine
> > >
> > > remove # from the lines CC=/usr/bin/gcc and
> > >
> > > run the commads:
> > >
> > > % ./configure
> > > % make
> > > % make test will complain about perl decoders, don't worry about that
> > > % make install
> > >
> > > robb...
> > >
> > >
> > >
> > >
> > > On Fri, 28 Jan 2005, Latimer, S wrote:
> > >
> > > > The files for the udunits package appeared correctly.
> > > > The netCDF package after gunzipping the /src directory does not appear
> > > > in the netcdf-3.6.0 package dir.
> > > > Might this have something to do with my version of Linux (9.0)?
> > > >
> > > > Stephen
> > > >
> > > > Stephen Latimer
> > > > Meteorology Graduate Student
> > > > Texas Tech University ATMO
> > > > Lubbock, TX 79409
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Robb Kambic [mailto:address@hidden]
> > > > Sent: Fri 1/28/2005 11:14
> > > > To: Latimer, S
> > > > Cc: decoders
> > > > Subject: RE: udunits and netCDF
> > > >
> > > > On Fri, 28 Jan 2005, Latimer, S wrote:
> > > >
> > > > > I could not find the undunits-1.12.4.tar.Z on the website:
> > > > > http://my.unidata.ucar.edu/modules.php?name=Downloads
> > > > >
> > > > > The only one I found as binary for linux is the 1.11.7 version.
> > > >
> > > > ok, we can use 1.11.7 version
> > > >
> > > > % cd udunits-1.11.7
> > > > % ls
> > > >
> > > > should be:
> > > >
> > > > bin/ man/ etc/ include/ lib/
> > > >
> > > >
> > > >
> > > > In the source page, I could not find one for Linux, but only then the
> > > > latest version is 1.12.2.
> > > > > I did find the netCDF file, but once again after gunzipping and untar
> > > > > there is not a configure file in the netCDF directory.
> > > >
> > > > after you unzip the file, from that dir do
> > > >
> > > > % cd netcdf-3.6.0/src/
> > > >
> > > > ls should be:
> > > >
> > > > cxx/ nf_test/ configure* aclocal.m4
> > > > man/ libsrc/ configure.in COPYRIGHT
> > > > ncgen/ nc_test/ macros.make.in config.guess*
> > > > win32/ nctest/ rules.make config.sub*
> > > > f90/ MANIFEST RELEASE_NOTES install-sh*
> > > > fortran/ INSTALL VERSION
> > > > ncdump/ Makefile README
> > > >
> > > > then do these commands:
> > > >
> > > > % setenv CF
> > > > % setenv CC gcc
> > > > % ./configure
> > > > % make
> > > >
> > > >
> > > >
> > > > >
> > > > > Stephen
> > > > >
> > > > > Stephen Latimer
> > > > > Meteorology Graduate Student
> > > > > Texas Tech University ATMO
> > > > > Lubbock, TX 79409
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: Robb Kambic [mailto:address@hidden]
> > > > > Sent: Fri 1/28/2005 10:14
> > > > > To: Latimer, S
> > > > > Cc: decoders
> > > > > Subject: RE: udunits and netCDF
> > > > >
> > > > > On Fri, 28 Jan 2005, Latimer, S wrote:
> > > > >
> > > > > > At this point, I have done only what the below e-mail describes.
> > > > > > The directory I have put the netCDF and udunits packages is
> > > > > > /usr/local. The decoders package has also been located in the same
> > > > > > directory. The current problem includes when I come to the point
> > > > > > to run ./configure on the udunits and netCDF the configure files
> > > > > > are missing.
> > > > > >
> > > > > > Stephen
> > > > > >
> > > > > > Stephen Latimer
> > > > > > Meteorology Graduate Student
> > > > > > Texas Tech University ATMO
> > > > > > Lubbock, TX 79409
> > > > > >
> > > > > > ________________________________
> > > > > >
> > > > > > From: Robb Kambic [mailto:address@hidden]
> > > > > > Sent: Fri 1/28/2005 09:48
> > > > > > To: Latimer, S
> > > > > > Cc: decoders
> > > > > > Subject: Re: udunits and netCDF
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > stephen,
> > > > > >
> > > > > > could you tell me your progress? i have time today to work with you.
> > > > > > yesterday was already commited. also, tell me your dir structure
> > > > > > you plan
> > > > > > on using for netcdf and udunits.
> > > > > >
> > > > > > thanks,
> > > > > > robb...
> > > > > >
> > > > > >
> > > > > > On Thu, 27 Jan 2005, Latimer, S wrote:
> > > > > >
> > > > > > > Robb,
> > > > > > >
> > > > > > > I downloaded and tried to install the udunits and netCDF
> > > > > > > packages, but once untarred the packages did not include the src
> > > > > > > folder (for netCDF) and neither had the configure file for
> > > > > > > installation. I downloaded the following files:
> > > > > > >
> > > > > > > netcdf-3.5.1.tar.Z
> > > > >
> > > > > just so we are on the same page, download netcdf-3.6.0.tar.Z the 5.1
> > > > > release is an old release
> > > > >
> > > > >
> > > > > > > udunts-1.11.7.tar.Z
> > > > >
> > > > > download udunits-1.12.4.tar.Z, same 11.7 is old release
> > > > >
> > > > > robb...
> > > > >
> > > > >
> > > >
> > > > ===============================================================================
> > > > Robb Kambic Unidata Program Center
> > > > Software Engineer III Univ. Corp for Atmospheric
> > > > Research
> > > > address@hidden WWW: http://www.unidata.ucar.edu/
> > > > ===============================================================================
> > > >
> > > >
> > > >
> > > >
> > >
> > > ===============================================================================
> > > Robb Kambic Unidata Program Center
> > > Software Engineer III Univ. Corp for Atmospheric
> > > Research
> > > address@hidden WWW: http://www.unidata.ucar.edu/
> > > ===============================================================================
> > >
> > >
> > >
> >
> > ===============================================================================
> > Robb Kambic Unidata Program Center
> > Software Engineer III Univ. Corp for Atmospheric
> > Research
> > address@hidden WWW: http://www.unidata.ucar.edu/
> > ===============================================================================
> >
> >
> >
> >
>
> ===============================================================================
> Robb Kambic Unidata Program Center
> Software Engineer III Univ. Corp for Atmospheric Research
> address@hidden WWW: http://www.unidata.ucar.edu/
> ===============================================================================
>
>
>
>
===============================================================================
Robb Kambic Unidata Program Center
Software Engineer III Univ. Corp for Atmospheric Research
address@hidden WWW: http://www.unidata.ucar.edu/
===============================================================================