[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: udunits and netCDF
- Subject: RE: udunits and netCDF
- Date: Fri, 28 Jan 2005 11:50:46 -0700 (MST)
On Fri, 28 Jan 2005, Latimer, S wrote:
> Robb,
>
> I did as you prescribed except in the CUSTOMIZE file the UDUNITS_PATH did
> not exist in the file. Also, there was not a complaint about perl after
> executing 'make test'. There were no problems doing the make install command.
it appears as the decoders were build sufficiently but before you can run
the decoders, UDUNITS_PATH needs to be set.
% setenv UDUNITS_PATH (udunits install path)/etc/udunits.dat
to check, do a
% ls $UDUNITS_PATH
now you can run the decoders, first create a cdl , netcdf template file
decoder path location:
bin/gribtocdl -v <raw grib file> > model.cdl
bin/gribtonc -l - model.cdl model.nc < model.raw
you might want to copy the netcdf/bin/ncgen to decoders/bin dir
if gribtonc is having a problem finding it.
robb...
>
> Stephen
>
> Stephen Latimer
> Meteorology Graduate Student
> Texas Tech University ATMO
> Lubbock, TX 79409
>
>
>
> -----Original Message-----
> From: Robb Kambic [mailto:address@hidden]
> Sent: Fri 1/28/2005 11:58
> To: Latimer, S
> Cc: decoders
> Subject: RE: udunits and netCDF
>
>
>
>
> stephen,
>
> attached is a binary dist for netcdf. after gunzipping and untarring,
> then lets move onto the decoders release.
>
> in the src/CUSTOMIZE file remove the "# " and set the path correctly for
> the vars CPP_NETCDF, LD_NETCDF, CPP_UDUNITS, LD_UDUNITS and
> UDUNITS_PATH. paths are where the netcdf and udunits are installed on your
> machine
>
> remove # from the lines CC=/usr/bin/gcc and
>
> run the commads:
>
> % ./configure
> % make
> % make test will complain about perl decoders, don't worry about that
> % make install
>
> robb...
>
>
>
>
> On Fri, 28 Jan 2005, Latimer, S wrote:
>
> > The files for the udunits package appeared correctly.
> > The netCDF package after gunzipping the /src directory does not appear in
> > the netcdf-3.6.0 package dir.
> > Might this have something to do with my version of Linux (9.0)?
> >
> > Stephen
> >
> > Stephen Latimer
> > Meteorology Graduate Student
> > Texas Tech University ATMO
> > Lubbock, TX 79409
> >
> >
> >
> > -----Original Message-----
> > From: Robb Kambic [mailto:address@hidden]
> > Sent: Fri 1/28/2005 11:14
> > To: Latimer, S
> > Cc: decoders
> > Subject: RE: udunits and netCDF
> >
> > On Fri, 28 Jan 2005, Latimer, S wrote:
> >
> > > I could not find the undunits-1.12.4.tar.Z on the website:
> > > http://my.unidata.ucar.edu/modules.php?name=Downloads
> > >
> > > The only one I found as binary for linux is the 1.11.7 version.
> >
> > ok, we can use 1.11.7 version
> >
> > % cd udunits-1.11.7
> > % ls
> >
> > should be:
> >
> > bin/ man/ etc/ include/ lib/
> >
> >
> >
> > In the source page, I could not find one for Linux, but only then the
> > latest version is 1.12.2.
> > > I did find the netCDF file, but once again after gunzipping and untar
> > > there is not a configure file in the netCDF directory.
> >
> > after you unzip the file, from that dir do
> >
> > % cd netcdf-3.6.0/src/
> >
> > ls should be:
> >
> > cxx/ nf_test/ configure* aclocal.m4
> > man/ libsrc/ configure.in COPYRIGHT
> > ncgen/ nc_test/ macros.make.in config.guess*
> > win32/ nctest/ rules.make config.sub*
> > f90/ MANIFEST RELEASE_NOTES install-sh*
> > fortran/ INSTALL VERSION
> > ncdump/ Makefile README
> >
> > then do these commands:
> >
> > % setenv CF
> > % setenv CC gcc
> > % ./configure
> > % make
> >
> >
> >
> > >
> > > Stephen
> > >
> > > Stephen Latimer
> > > Meteorology Graduate Student
> > > Texas Tech University ATMO
> > > Lubbock, TX 79409
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Robb Kambic [mailto:address@hidden]
> > > Sent: Fri 1/28/2005 10:14
> > > To: Latimer, S
> > > Cc: decoders
> > > Subject: RE: udunits and netCDF
> > >
> > > On Fri, 28 Jan 2005, Latimer, S wrote:
> > >
> > > > At this point, I have done only what the below e-mail describes. The
> > > > directory I have put the netCDF and udunits packages is /usr/local.
> > > > The decoders package has also been located in the same directory. The
> > > > current problem includes when I come to the point to run ./configure on
> > > > the udunits and netCDF the configure files are missing.
> > > >
> > > > Stephen
> > > >
> > > > Stephen Latimer
> > > > Meteorology Graduate Student
> > > > Texas Tech University ATMO
> > > > Lubbock, TX 79409
> > > >
> > > > ________________________________
> > > >
> > > > From: Robb Kambic [mailto:address@hidden]
> > > > Sent: Fri 1/28/2005 09:48
> > > > To: Latimer, S
> > > > Cc: decoders
> > > > Subject: Re: udunits and netCDF
> > > >
> > > >
> > > >
> > > >
> > > > stephen,
> > > >
> > > > could you tell me your progress? i have time today to work with you.
> > > > yesterday was already commited. also, tell me your dir structure you
> > > > plan
> > > > on using for netcdf and udunits.
> > > >
> > > > thanks,
> > > > robb...
> > > >
> > > >
> > > > On Thu, 27 Jan 2005, Latimer, S wrote:
> > > >
> > > > > Robb,
> > > > >
> > > > > I downloaded and tried to install the udunits and netCDF packages,
> > > > > but once untarred the packages did not include the src folder (for
> > > > > netCDF) and neither had the configure file for installation. I
> > > > > downloaded the following files:
> > > > >
> > > > > netcdf-3.5.1.tar.Z
> > >
> > > just so we are on the same page, download netcdf-3.6.0.tar.Z the 5.1
> > > release is an old release
> > >
> > >
> > > > > udunts-1.11.7.tar.Z
> > >
> > > download udunits-1.12.4.tar.Z, same 11.7 is old release
> > >
> > > robb...
> > >
> > >
> >
> > ===============================================================================
> > Robb Kambic Unidata Program Center
> > Software Engineer III Univ. Corp for Atmospheric
> > Research
> > address@hidden WWW: http://www.unidata.ucar.edu/
> > ===============================================================================
> >
> >
> >
> >
>
> ===============================================================================
> Robb Kambic Unidata Program Center
> Software Engineer III Univ. Corp for Atmospheric Research
> address@hidden WWW: http://www.unidata.ucar.edu/
> ===============================================================================
>
>
>
===============================================================================
Robb Kambic Unidata Program Center
Software Engineer III Univ. Corp for Atmospheric Research
address@hidden WWW: http://www.unidata.ucar.edu/
===============================================================================