[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: New decoders release
- Subject: RE: New decoders release
- Date: Mon, 7 Apr 2003 16:25:16 -0600 (MDT)
Brian,
It probably didn't give any error messages, huh?
I just tried the binary gribtonc that I sent you on a avn-q.wmo (raw)
file, it worked just fine. I think you might have a point about the other
packages involved. Did you go back and recompile them again setting CC,
ie
% setenv CC gcc
Remember you need to do a "make distclean" for all the packages,
configure, make, etc
Maybe you should try to run it in the debugger gdb.
Also, have you tried to run gribtonc on some other models? Is you machine
a standard linux setup?
Robb...
On Mon, 7 Apr 2003, HOETH, BRIAN R. (JSC-ZS) (LM) wrote:
> Robb,
>
> Thanks! I picked it up and ran gribtonc again and I still had a core dump?
> Maybe the udunits, netcdf, and netcdf-perl installations didn't go as well
> as I thought? I don't really know though because like I said, I picked up
> the binary distributions of udunits and netcdf ... the only one I had to
> build was netcdf-perl because there's no netcdf-perl binary. Well, thanks
> for all your help Robb, sorry things aren't working out for me?
>
> Brian
>
> -----Original Message-----
> From: Robb Kambic [mailto:address@hidden]
> Sent: Monday, April 07, 2003 4:20 PM
> To: HOETH, BRIAN R. (JSC-ZS) (LM)
> Cc: decoders
> Subject: RE: New decoders release
>
>
> Brian,
>
>
> The binary tar package is located at:
>
>
> % ftp www.unidata.ucar.edu as anonymous
> % cd pub/binary/linux_2.4.18-i686
> % get decoders-2.4.4.binary.tar
>
> Robb...
>
>
>
>
> On Mon, 7 Apr 2003, HOETH, BRIAN R. (JSC-ZS) (LM) wrote:
>
> > Wow! Thanks Robb! Here's my uname -a output info:
> >
> > Linux etamodel 2.4.18-14smp #1 SMP Wed Sep 4 12:34:47 EDT 2002 i686 i686
> > i386 GNU/Linux
> >
> >
> > -----Original Message-----
> > From: Robb Kambic [mailto:address@hidden]
> > Sent: Monday, April 07, 2003 11:25 AM
> > To: HOETH, BRIAN R. (JSC-ZS) (LM)
> > Cc: decoders
> > Subject: RE: New decoders release
> >
> >
> > On Mon, 7 Apr 2003, HOETH, BRIAN R. (JSC-ZS) (LM) wrote:
> >
> > > Robb,
> > >
> > > Well, bad news, I ran gribtonc by hand and it core dumped on me? What
> > next?
> >
> >
> > Brian,
> >
> > If you give me your version of Linux, I'll make a binary distribution for
> > you. ie,
> >
> > % uname -a
> >
> > Robb...
> >
> >
> >
> > >
> > > Brian
> > >
> > > -----Original Message-----
> > > From: Robb Kambic [mailto:address@hidden]
> > > Sent: Thursday, April 03, 2003 3:50 PM
> > > To: HOETH, BRIAN R. (JSC-ZS) (LM)
> > > Cc: decoders
> > > Subject: RE: New decoders release
> > >
> > >
> > > On Thu, 3 Apr 2003, HOETH, BRIAN R. (JSC-ZS) (LM) wrote:
> > >
> > > > Robb,
> > > >
> > > > Thanks for the info. The gribtonc doesn't seem to be working for me
> > > though?
> > > > I copied the "AVN model on Lambert conformal CONUS grid" entry from
> your
> > > > pqact.conf and put it into mine and it's not working? I had to modify
> > the
> > > > entry slightly by putting in my specific paths:
> > > >
> > > > (1) for the decoder (/home/ldm/decoders/gribtonc)
> > > > (2) for the cdl (/home/ldm/etc/avn-q.cdl)
> > > > (3) for the data (/data/pub/decoded/netcdf/GRIB)
> > > >
> > > > but it still should work I would think? The
> > /data/pub/decoded/netcdf/GRIB
> > > > directory got created, but there are no data in it?
> > > >
> > >
> > > Brian,
> > >
> > > A couple of things, in the pqact entries the white spaces are tabs, not
> > > spaces. The only place white space is a "space" in the pattern
> > > specification. You can check your pqact using the ldmadmin command, ie
> > >
> > > % ldmadmin pqactcheck
> > >
> > > It's not fool proof, it sometimes lets errors through.
> > >
> > > The second is to run gribtonc on the command line as user LDM and all
> the
> > > paths. ie
> > >
> > > rawdata
> > >
> > > Where the raw data file was created using the FILE action, ie
> > >
> > > HRS ^Y.Q... KWB. (..)(..).*(/mAVN|/mSSIAVN)
> > > FILE data/rawfile/(\1:yyyy)(\1:mm)\1\2_avn-q.wmo
> > >
> > >
> > >
> > > > Just filing the data doesn't seem to be a problem because I added your
> > > > "Ensemble members" entry into my pqact.conf and I am seeing *ENS.wmo
> > files
> > > > filing into my /data/pub/raw/hrs/model/ensemble directory? By the
> way,
> > > does
> > > > a cdl exist for the Ensemble data?
> > >
> > > Not yet
> > >
> > > I would think so since I believe the
> > > > Ensemble data are flowing into AWIPS now?
> > >
> > > The ensemble data doesn't fit well into the current gribtonc
> configuration
> > > because the members overlay the same projection points. This causes the
> > > member data to overwritten with the new member data. I have this
> problem
> > on
> > > my list of things to do.
> > >
> > >
> > > > > Lastly, where can I get a list of all the WMO
> > > GRIB patterns? >
> > >
> > > Here's a url
> > >
> > > http://205.156.54.206/oso/dir_subset.shtml
> > >
> > > It's not the best documentation
> > >
> > > Robb...
> > >
> > >
> > >
> > > > Thanks!
> > > >
> > > > Brian
> > > >
> > > > -----Original Message-----
> > > > From: Robb Kambic [mailto:address@hidden]
> > > > Sent: Tuesday, April 01, 2003 2:42 PM
> > > > To: HOETH, BRIAN R. (JSC-ZS) (LM)
> > > > Cc: decoders
> > > > Subject: RE: New decoders release
> > > >
> > > >
> > > > On Tue, 1 Apr 2003, HOETH, BRIAN R. (JSC-ZS) (LM) wrote:
> > > >
> > > > > Robb,
> > > > >
> > > > > Thanks! It worked! If I may trouble you some more, I have a few
> more
> > > > > questions:
> > > > >
> > > > > (1) Is there a User's Guide for the decoders package?
> > > >
> > > > Brian,
> > > >
> > > > There no user's guide per se but there's README.perlDecoders and I'll
> > send
> > > > examples of the ldm pqact.conf entries as a attachment. Look for the
> > > > gribtonc entries.
> > > >
> > > > >
> > > > > (2) I'm wanting to mess around with gribtonc, but I can't find any
> > > > > documentation on it. I tried "man gribtonc", but I'm told there is
> No
> > > > > manual entry for gribtonc? I'm not sure why because I see
> gribtonc.1
> > in
> > > > > /home/ldm/man/man1 and I have added /home/ldm/man,
> /home/ldm/man/man1,
> > > and
> > > > > /home/ldm/man/man3 to MANPATH?
> > > > >
> > > >
> > > > The man files are in the man directory of the decoders package, same
> > level
> > > > as the src directory. Either copy them to the ldm man directory or
> add
> > > > that directory to the MANPATH environment variable. Also you can go
> to
> > > > the man directory and do command line nroff, ie
> > > >
> > > > % nroff -man gribtonc.1 | more
> > > >
> > > >
> > > > > (3) Where should I put the *.cdl files?
> > > >
> > > > The cdls are usually placed in the ~ldm/etc directory. The decoders
> > > > binaries are usually located in a ~ldm/decoders directory also.
> > > >
> > > > Robb...
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Brian
> > > > >
> > > > > -----Original Message-----
> > > > > From: Robb Kambic [mailto:address@hidden]
> > > > > Sent: Tuesday, April 01, 2003 10:31 AM
> > > > > To: HOETH, BRIAN R. (JSC-ZS) (LM)
> > > > > Cc: decoders
> > > > > Subject: RE: New decoders release
> > > > >
> > > > >
> > > > > On Mon, 31 Mar 2003, HOETH, BRIAN R. (JSC-ZS) (LM) wrote:
> > > > >
> > > > > > Robb,
> > > > > >
> > > > > > OK, I grabbed the binary distributions of udunits and netcdf and
> was
> > > > able
> > > > > to
> > > > > > get the source distribution of netcdf-perl to seemingly install
> > > without
> > > > > > problems. I've grabbed the
> > > > > > decoders-2.4.4.tar.Z file and the decoders_patches.tar file. I
> > > unzipped
> > > > > and
> > > > > > untarred decoders-2.4.4.tar.Z and tried to run:
> > > > > >
> > > > > > (./configure & make install install clean) >&! log
> > > > > >
> > > > > > No joy! No what? I've attached my log file, my CUSTOMIZE file,
> the
> > > > > results
> > > > > > of "uname -a" (uname.out). For kicks, I attached the results of
> > "perl
> > > > -V"
> > > > > > too (perl.out). Are there any "known" settings for the CUSTOMIZE
> > file
> > > > for
> > > > > > my linux OS?
> > > > >
> > > > > Brian,
> > > > >
> > > > > I think the problem is your compiler flag -traditional. Here's what
> to
> > > do:
> > > > >
> > > > > % make distclean in src dir of decoders-2.4.4
> > > > > % setenv CC gcc
> > > > > % (./configure & make all test install clean) >&! log & Note
> > changes
> > > > > % tail -f log
> > > > >
> > > > > Let me know how this works out.
> > > > >
> > > > > Robb...
> > > > >
> > > > > ps log info stuff really helps out in debugging problems
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > > Brian
> > > > > >
> > > > > > P.S. - I've obviously never tried to install decoders.tar.Z before
> > in
> > > > case
> > > > > > you hadn't guessed.
> > > > > >
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Robb Kambic [mailto:address@hidden]
> > > > > > Sent: Thursday, March 27, 2003 10:35 AM
> > > > > > To: HOETH, BRIAN R. (JSC-ZS) (LM)
> > > > > > Cc: decoders
> > > > > > Subject: RE: New decoders release
> > > > > >
> > > > > >
> > > > > > On Thu, 27 Mar 2003, HOETH, BRIAN R. (JSC-ZS) (LM) wrote:
> > > > > >
> > > > > > > Robb,
> > > > > > >
> > > > > > > Question: Are the binary distributions of udunits, netcdf, and
> > > > > > netcdf-perl
> > > > > > > sufficient in order to install decoders-2.4.4.tar.Z or should I
> > > > attempt
> > > > > to
> > > > > > > install the source distributions of each of the auxilliary
> > packages?
> > > > > >
> > > > > > Brian,
> > > > > >
> > > > > > If the binaries are available, you could use them. the decoders
> > > package
> > > > > > needs the libraries and include files for netcdf and udunits. I
> > don't
> > > > > > think netcdf-perl is available as a binary though
> > > > > >
> > > > > > Let me know of problems.
> > > > > >
> > > > > > Robb...
> > > > > >
> > > > > >
> > > > > > >
> > > > > > > Thanks,
> > > > > > > ---------------
> > > > > > > Brian Hoeth
> > > > > > > Spaceflight Meteorology Group
> > > > > > > Johnson Space Center
> > > > > > > Ph: 281-483-3246
> > > > > > > Ops: 281-483-1051
> > > > > > >
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Robb Kambic [mailto:address@hidden]
> > > > > > > Sent: Friday, February 28, 2003 3:53 PM
> > > > > > > To: address@hidden
> > > > > > > Cc: decoders
> > > > > > > Subject: New decoders release
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Hiya,
> > > > > > >
> > > > > > > I'm pleased to announce the tested release of Decoders 2.4.4.
> > > > Remember
> > > > > > > the last release was a beta release, since then there have been
> > many
> > > > > > changes
> > > > > > > to make decoders more robust. If any of the following release
> > notes
> > > > > apply
> > > > > > or
> > > > > > > there are gribtonc messages in the ldmd.log file, I suggest that
> > one
> > > > > > > installs the latest release.
> > > > > > >
> > > > > > > Release Notes since last release:
> > > > > > >
> > > > > > > 2.4.4 2003-02-25 added vars gust_sfc to ruc2.cdl and vars
> > > > > Tmin_fhg
> > > > > > > and
> > > > > > > Tmax_fhg to avn-x.cdl
> > > > > > > mods to gdes.c gribtocdl.[1c] inetutil.c
> > > > ulog.h
> > > > > so
> > > > > > > code compiles on AIX boxes.
> > > > > > >
> > > > > > > 2.4.3 2003-02-21 modifications so user parms
> functionality
> > > > works
> > > > > > > correctly in the code, added this
> > > > functionality
> > > > > to
> > > > > > > gribdump. Also updated the man pages.
> mods
> > > to:
> > > > > > > gribtocdl.c, params.c, gribdump.c,
> > > gribtonc.1
> > > > > and
> > > > > > > gribdump.1
> > > > > > >
> > > > > > > 2.4.2 2003-02-19 Added the PNO indicator for Metar
> decoder
> > > > > > > In gdes.c, changed i_dim from lat to lon
> > > > > > > fixed avn-1.0x1.0.cdl also
> > > > > > >
> > > > > > > 2.4.1 2003-01-31 Fixed some error for the avn-1.0x1.0
> Grid.
> > > > Also
> > > > > > > fixed
> > > > > > > errors for the Gaussian lat/lon grid,
> plus
> > > > other
> > > > > > > fixes
> > > > > > > mods to gribtocdl.c gdes.c nc.c
> > > > > > >
> > > > > > > Other fixes forgotten to be entered in Notes.
> > > > > > >
> > > > > > > To reiterate a couple of gribtocdl notes:
> > > > > > >
> > > > > > > - Use a representative dataset when creating a CDL file with
> > > > gribtocdl.
> > > > > If
> > > > > > > the
> > > > > > > dataset is missing a variable, it will also be missing in the
> > CDL.
> > > > > > >
> > > > > > > - Consider the created CDL as a starting point, minor tweaks are
> > > > usually
> > > > > > > needed.
> > > > > > >
> > > > > > > - The external table file feature for variable name override has
> > not
> > > > > > > been tested much, but needs to be used with gribtocdl as well
> as
> > > > > > > gribtonc to override variable names. It can also be used with
> > > > > gribdump.
> > > > > > >
> > > > > > > - Default variable names follow NUWG conventions.
> > > > > > >
> > > > > > >
> > > > > > > To get the decoders code via ftp:
> > > > > > >
> > > > > > > % ftp www.unidata.ucar.edu
> > > > > > > login as anonymous
> > > > > > >
> > > > > > > % cd pub/decoders
> > > > > > > % get decoders-2.4.4.tar.Z
> > > > > > >
> > > > > > >
> > > > > > > If problems are found, please send email to
> > address@hidden
> > > > > with
> > > > > > > information necessary to reproduce the problem, error messages,
> > and
> > > > log
> > > > > > > messages.
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Robb...
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ============================================================================
> > > > > > > ===
> > > > > > > Robb Kambic Unidata Program
> > > > > > > Center
> > > > > > > Software Engineer III Univ. Corp for
> > > > > Atmospheric
> > > > > > > Research
> > > > > > > address@hidden WWW:
> > > http://www.unidata.ucar.edu/
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ============================================================================
> > > > > > > ===
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ============================================================================
> > > > > > ===
> > > > > > Robb Kambic Unidata Program Center
> > > > > > Software Engineer III Univ. Corp for
> > > > Atmospheric
> > > > > > Research
> > > > > > address@hidden WWW:
> > http://www.unidata.ucar.edu/
> > > > > >
> > > > >
> > > >
> > >
> >
> ============================================================================
> > > > > > ===
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> ============================================================================
> > > > > ===
> > > > > Robb Kambic Unidata Program Center
> > > > > Software Engineer III Univ. Corp for
> > > Atmospheric
> > > > > Research
> > > > > address@hidden WWW:
> http://www.unidata.ucar.edu/
> > > > >
> > > >
> > >
> >
> ============================================================================
> > > > > ===
> > > > >
> > > >
> > > >
> > >
> >
> ============================================================================
> > > > ===
> > > > Robb Kambic Unidata Program Center
> > > > Software Engineer III Univ. Corp for
> > Atmospheric
> > > > Research
> > > > address@hidden WWW: http://www.unidata.ucar.edu/
> > > >
> > >
> >
> ============================================================================
> > > > ===
> > > >
> > >
> > >
> >
> ============================================================================
> > > ===
> > > Robb Kambic Unidata Program Center
> > > Software Engineer III Univ. Corp for
> Atmospheric
> > > Research
> > > address@hidden WWW: http://www.unidata.ucar.edu/
> > >
> >
> ============================================================================
> > > ===
> > >
> >
> >
> ============================================================================
> > ===
> > Robb Kambic Unidata Program Center
> > Software Engineer III Univ. Corp for Atmospheric
> > Research
> > address@hidden WWW: http://www.unidata.ucar.edu/
> >
> ============================================================================
> > ===
> >
>
> ============================================================================
> ===
> Robb Kambic Unidata Program Center
> Software Engineer III Univ. Corp for Atmospheric
> Research
> address@hidden WWW: http://www.unidata.ucar.edu/
> ============================================================================
> ===
>
===============================================================================
Robb Kambic Unidata Program Center
Software Engineer III Univ. Corp for Atmospheric Research
address@hidden WWW: http://www.unidata.ucar.edu/
===============================================================================