[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 20030226: install udunit (fwd)
- Subject: Re: 20030226: install udunit (fwd)
- Date: Thu, 27 Feb 2003 15:03:14 -0700 (MST)
Wanli,
I discovered you were probably using an ANSI C compiler but IBM compilers
have some quirks that make it look like STD C compilers. I did some tests
on our IBM machine and discovered these problems and fixed them. I
usually don't use IBM machines so I was unaware of these problems. I
created a new decoders package decoders-2.4.4.tar.Z with the fixes. The
new tar file is locate in the pub/decoders/ directory. There were
5 files that needed modification. I "believe" it should now compile using
your regular compiler or the gcc one too. Let me know if you still have
problems.
Robb...
On Thu, 27 Feb 2003, Wanli Wu wrote:
> Thanks, Robb.
>
> There is gcc located at /usr/local/bin, but after 'make distclean", "setenv CC
> /usr/local/bin/gcc", the "make" still could not went through. I also tried to
> install udunits on linux (portland group compilers) and my sunworkstation, it
> all failed. I'm going to send SCD a message,and see if they're interested in
> installing.
>
> Wanli
>
> >Return-Path: <address@hidden>
> >Organization: UCAR/Unidata
> >Keywords: 200302271816.h1RIGGu10786
> >X-Authentication-Warning: wcfields.unidata.ucar.edu: rkambic owned process
> doing -bs
> >To: Wanli Wu <address@hidden>
> >cc: decoders <address@hidden>
> >Subject: Re: 20030226: install udunit (fwd)
> >In-Reply-To: <address@hidden>
> >References: <address@hidden>
> >MIME-Version: 1.0
> >Content-Type: TEXT/PLAIN; charset=US-ASCII
> >
> >On Thu, 27 Feb 2003, Wanli Wu wrote:
> >
> >> Thanks, Robb. I am trying the grib2nc on bluesky since the grib data are in
> NCAR
> >> MSS. "uname -a" displays the following info.
> >> AIX bs1201en 1 5 0023F7EA4C00
> >>
> >> Could you help me to locate ANSI C?
> >
> >
> >Wanli,
> >
> >There's probably not a AIX ANSI compiler on the machine, you need to use
> >gcc. That's the GNU compiler, it's ANSI. It's usually located at:
> >
> >/usr/local/gnu/bin/gcc check if this is correct.
> >
> >You need to start over with the build
> >
> >% make distclean
> >
> >% setenv CC /usr/local/gnu/bin/gcc
> >% ./configure
> >% make install
> >
> >Hopefully this solves your problem.
> >
> >>
> >> BTW, I was wondering if it is possible to have SCD personnel to install
> udunits
> >> and this decoder packages as stardard tools for NCAR mechines (like
> >> bluesky,
> >> blackforest). If so, it would save many NCAR users a lot of time.
> >>
> >
> >I have no control over SCD, you need to make the request to SCD to have
> >them do it.
> >
> >Robb...
> >
> >
> >
> >>
> >> Wanli
> >>
> >> >Return-Path: <address@hidden>
> >> >Organization: UCAR/Unidata
> >> >Keywords: 200302271734.h1RHYFT08657
> >> >X-Authentication-Warning: wcfields.unidata.ucar.edu: rkambic owned process
> >> doing -bs
> >> >To: Wanli Wu <address@hidden>
> >> >cc: decoders <address@hidden>
> >> >Subject: Re: 20030226: install udunit (fwd)
> >> >In-Reply-To: <address@hidden>
> >> >References: <address@hidden>
> >> >MIME-Version: 1.0
> >> >Content-Type: TEXT/PLAIN; charset=US-ASCII
> >> >
> >> >Wanli,
> >> >
> >> >The basic problem with the compilation is that you are using a STD C
> >> >compiler. The code would compile w/o changes if you use a ANSI C
> >> >compiler, which most compilers are today. If your using a SUN it is
> >> >located at:
> >> >/opt/SUNWspro/bin/cc to get the correct compiler :
> >> >
> >> >% setenv CC /opt/SUNWspro/bin/cc
> >> >
> >> >If you are still having trouble finding the ANSI C compiler on your
> >> >machine, I can help you locate it. You will need to send me the type of
> >> >machine and the OS version
> >> >
> >> >Robb...
> >> >
> >> >
> >> >On Thu, 27 Feb 2003, Wanli Wu wrote:
> >> >
> >> >> Robb,
> >> >>
> >> >> Thanks for the revised gdes.c. Now 'make' passed 'gdes.c', but stopped
> >> >> at
> >> >> inetutil.c. Error message is as follows:
> >> >> cc -c -g "-I/usr/local/include" -I/home/bluesky/wanliwu/include
> >> >> -D_ALL_SOURCE inetutil.c
> >> >> "inetutil.c", line 24.17: 1506-275 (S) Unexpected text 'int'
> >> >> encountered.
> >> >> "inetutil.c", line 24.17: 1506-275 (S) Unexpected text ')' encountered.
> >> >> "inetutil.c", line 24.24: 1506-276 (S) Syntax error: possible missing
> >> >> ')'?
> >> >> "inetutil.c", line 24.17: 1506-343 (S) Redeclaration of h_errno_which
> differs
> >> >> from previous declaration on line 42 of "/usr/include/netdb.h".
> >> >> "inetutil.c", line 24.17: 1506-050 (I) Return type "int**" in
> redeclaration
> >> is
> >> >> not compatible with the previous return type "void*".
> >> >> make: 1254-004 The error code from the last command is 1
> >> >>
> >> >>
> >> >> Would you please give it a check?
> >> >>
> >> >> Thanks,
> >> >>
> >> >> Wanli
> >> >>
> >> >> >Return-Path: <address@hidden>
> >> >> >Organization: UCAR/Unidata
> >> >> >Keywords: 200302262337.h1QNb7A18540
> >> >> >X-Authentication-Warning: wcfields.unidata.ucar.edu: rkambic owned
> process
> >> >> doing -bs
> >> >> >To: address@hidden
> >> >> >cc: decoders <address@hidden>
> >> >> >Subject: Re: 20030226: install udunit (fwd)
> >> >> >MIME-Version: 1.0
> >> >> >Content-Type: MULTIPART/MIXED;
> >> >> BOUNDARY="-559023410-758783491-1046302627=:16380"
> >> >> >
> >> >> >Wanli,
> >> >> >
> >> >> >I believe the problem is how standard C needs to have procdures
> >> >> >declared.
> >> >> >I moved the problem procedures up higher in the code. The new gdes.c
> >> >> >file
> >> >> >is attached to this message. Let me know if this solves your
> >> >> >problem so I can checkin the changes.
> >> >> >
> >> >> >Robb...
> >> >> >
> >> >>
> >>
> >===============================================================================
> >> >> >Robb Kambic Unidata Program Center
> >> >> >Software Engineer III Univ. Corp for Atmospheric
> >> Research
> >> >> >address@hidden WWW: http://www.unidata.ucar.edu/
> >> >>
> >>
> >===============================================================================
> >> >> >
> >> >> >------- Forwarded Message
> >> >> >
> >> >> >Return-Path: address@hidden
> >> >> >Delivery-Date: Wed Feb 26 11:44:36 2003
> >> >> >Received: from kobuk.colorado.edu (kobuk.Colorado.EDU
> >> >> >[128.138.136.245])
> >> >> > by unidata.ucar.edu (UCAR/Unidata) with ESMTP id h1QIiZt08775
> >> >> > for <address@hidden>; Wed, 26 Feb 2003 11:44:35 -0700 (MST)
> >> >> >Organization: UCAR/Unidata
> >> >> >Keywords: 200302261844.h1QIiZt08775
> >> >> >Received: from kobuk.colorado.edu (kobuk.Colorado.EDU
> >> >> >[128.138.136.245])
> >> >> > by kobuk.colorado.edu (8.9.1a/8.9.1/ITS-5.0/standard) with SMTP
> >> >> > id
> >> >> LAA26288
> >> >> > for <address@hidden>; Wed, 26 Feb 2003 11:44:31 -0700 (MST)
> >> >> >Message-Id: <address@hidden>
> >> >> >Date: Wed, 26 Feb 2003 11:44:31 -0700 (MST)
> >> >> >From: Wanli Wu <address@hidden>
> >> >> >Reply-To: Wanli Wu <address@hidden>
> >> >> >Subject: Re: 20030226: install udunit
> >> >> >To: address@hidden
> >> >> >MIME-Version: 1.0
> >> >> >Content-Type: TEXT/plain; charset=us-ascii
> >> >> >Content-MD5: iheKeRut0S36+/9o2CiRDg==
> >> >> >X-Mailer: dtmail 1.3.0 CDE Version 1.3 SunOS 5.7 sun4u sparc
> >> >> >X-Spam-Status: No, hits=-0.1 required=5.0
> >> >> > tests=AWL,NOSPAM_INC,QUOTED_EMAIL_TEXT,SPAM_PHRASE_00_01
> >> >> > version=2.43
> >> >> >X-Spam-Level:
> >> >> >
> >> >> >Steve,
> >> >> >
> >> >> >Thanks. Actually, the 'make install' indeed installed those files on my
> home
> >> >> >directory (though some error meesage at the end of installation).
> >> >> >
> >> >> >Now I tried to install decoders-2.4.3 that has grib2nc. What I did was
> >> >> >
> >> >> >./configure --prefix=$HOME
> >> >> >
> >> >> >The configure did ask where netcdf lib/include are, I given as
> >> >> >"-L/usr/local/lib32/r4i3 -lnetcdf" for the netcdf library
> >> >> >"-I/usr/local/include" for netcdf include files
> >> >> >
> >> >> >The config.log file has few error message like:
> >> >> >configure:1070: cc -E -traditional-cpp -D_ALL_SOURCE conftest.c
> >/dev/null
> >> >> 2>co
> >> >> >nftest.out
> >> >> >cc: 1501-210 command option t contains an incorrect subargument
> >> >> >1506-173 (W) Option lm is not valid. Enter xlc for list of valid
> >> >> >options.
> >> >> >configure: failed program was:
> >> >> >#line 1064 "configure"
> >> >> >#include "confdefs.h"
> >> >> >#include <assert.h>
> >> >> >Syntax Error
> >> >> >configure:1087: cc -nologo -E -D_ALL_SOURCE conftest.c >/dev/null
> >> >> 2>conftest.ou
> >> >> >t
> >> >> >1506-173 (W) Option lm is not valid. Enter xlc for list of valid
> >> >> >options.
> >> >> >configure: failed program was:
> >> >> >#line 1081 "configure"
> >> >> >#include "confdefs.h"
> >> >> >#include <assert.h>
> >> >> >Syntax Error
> >> >> >
> >> >> >
> >> >> >Then I invoked 'make', it stoped with error:
> >> >> >"gdes.c", line 2688.13: 1506-343 (S) Redeclaration of copy_gdes_ll
> differs
> >> from
> >> >> >previous declaration on line 2604 of "gdes.c".
> >> >> >"gdes.c", line 2688.13: 1506-050 (I) Return type "void" in
> >> >> >redeclaration
> is
> >> not
> >> >> >compatible with the previous return type "int".
> >> >> >"gdes.c", line 2705.13: 1506-343 (S) Redeclaration of copy_gdes_gau
> differs
> >> >> from
> >> >> >previous declaration on line 2612 of "gdes.c".
> >> >> >"gdes.c", line 2705.13: 1506-050 (I) Return type "void" in
> >> >> >redeclaration
> is
> >> not
> >> >> >compatible with the previous return type "int".
> >> >> >"gdes.c", line 2722.13: 1506-343 (S) Redeclaration of copy_gdes_sph
> differs
> >> >> from
> >> >> >previous declaration on line 2620 of "gdes.c".
> >> >> >"gdes.c", line 2722.13: 1506-050 (I) Return type "void" in
> >> >> >redeclaration
> is
> >> not
> >> >> >compatible with the previous return type "int".
> >> >> >"gdes.c", line 2740.13: 1506-343 (S) Redeclaration of copy_gdes_mercat
> >> differs
> >> >> >from previous declaration on line 2626 of "gdes.c".
> >> >> >"gdes.c", line 2740.13: 1506-050 (I) Return type "void" in
> >> >> >redeclaration
> is
> >> not
> >> >> >compatible with the previous return type "int".
> >> >> >"gdes.c", line 2745.13: 1506-343 (S) Redeclaration of copy_gdes_polars
> >> differs
> >> >> >from previous declaration on line 2632 of "gdes.c".
> >> >> >"gdes.c", line 2745.13: 1506-050 (I) Return type "void" in
> >> >> >redeclaration
> is
> >> not
> >> >> >compatible with the previous return type "int".
> >> >> >"gdes.c", line 2750.13: 1506-343 (S) Redeclaration of copy_gdes_lambert
> >> differs
> >> >> >from previous declaration on line 2637 of "gdes.c".
> >> >> >"gdes.c", line 2750.13: 1506-050 (I) Return type "void" in
> >> >> >redeclaration
> is
> >> not
> >> >> >compatible with the previous return type "int".
> >> >> >make: 1254-004 The error code from the last command is 1.
> >> >> >
> >> >> >
> >> >> >Stop.
> >> >> >make: 1254-004 The error code from the last command is 1.
> >> >> >
> >> >> >
> >> >> >What can I do or what I did wrong? (of course, 'make install' could not
> go).
> >> >> >
> >> >> >
> >> >> >Thanks,
> >> >> >
> >> >> >Wanli
> >> >> >
> >> >> >>Return-Path: <address@hidden>
> >> >> >>Organization: UCAR/Unidata
> >> >> >>To: Wanli Wu <address@hidden>
> >> >> >>cc: address@hidden
> >> >> >>Subject: 20030226: install udunit
> >> >> >>In-reply-to: Your message of "Wed, 26 Feb 2003 11:11:52 MST."
> >> >> ><address@hidden>
> >> >> >>Keywords: 200302261811.h1QIBut15714
> >> >> >>
> >> >> >>Wanli Wu,
> >> >> >>
> >> >> >>>Date: Wed, 26 Feb 2003 11:11:52 -0700 (MST)
> >> >> >>>From: Wanli Wu <address@hidden>
> >> >> >>>Organization: University of Colorado
> >> >> >>>To: address@hidden
> >> >> >>>Subject: Re: 20030226: install udunit
> >> >> >>
> >> >> >>The above message contained the following:
> >> >> >>
> >> >> >>> Thanks for the quick response. I didn't 'make' before 'make
> >> >> >>> install'. So I made a clean install again. At the end, I saw message
> >> >> >>> like below though I intended to install it at my home directory
> >> >> >>> (./configure --prefix=$HOME). Will it work if I manually copy the
> >> >> >>> following files to $HOME:
> >> >> >>
> >> >> >>You should allow the package to install itself by executing the
> >> >> >>command
> >> >> >>"make install" (after the command "make") rather than try to install
> >> >> >>the package manually.
> >> >> >>
> >> >> >>Regards,
> >> >> >>Steve Emmerson <http://www.unidata.ucar.edu>
> >> >> >
> >> >> > <> +++++++ Wanli Wu +++++++ <>
> >> >> > <> CIRES, University of Colorado <>
> >> >> > <> Boulder, Colorado <>
> >> >> > <> (303) 492-0281 (O) <>
> >> >> > <> address@hidden <>
> >> >> > <> http://cires.colorado.edu/~wwu <>
> >> >> >
> >> >> >------- End of Forwarded Message
> >> >>
> >> >> <> +++++++ Wanli Wu +++++++ <>
> >> >> <> CIRES, University of Colorado <>
> >> >> <> Boulder, Colorado <>
> >> >> <> (303) 492-0281 (O) <>
> >> >> <> address@hidden <>
> >> >> <> http://cires.colorado.edu/~wwu <>
> >> >>
> >> >>
> >> >
> >>
> >===============================================================================
> >> >Robb Kambic Unidata Program Center
> >> >Software Engineer III Univ. Corp for Atmospheric
> Research
> >> >address@hidden WWW: http://www.unidata.ucar.edu/
> >>
> >===============================================================================
> >>
> >> <> +++++++ Wanli Wu +++++++ <>
> >> <> CIRES, University of Colorado <>
> >> <> Boulder, Colorado <>
> >> <> (303) 492-0281 (O) <>
> >> <> address@hidden <>
> >> <> http://cires.colorado.edu/~wwu <>
> >>
> >>
> >
> >===============================================================================
> >Robb Kambic Unidata Program Center
> >Software Engineer III Univ. Corp for Atmospheric
> >Research
> >address@hidden WWW: http://www.unidata.ucar.edu/
> >===============================================================================
>
> <> +++++++ Wanli Wu +++++++ <>
> <> CIRES, University of Colorado <>
> <> Boulder, Colorado <>
> <> (303) 492-0281 (O) <>
> <> address@hidden <>
> <> http://cires.colorado.edu/~wwu <>
>
>
===============================================================================
Robb Kambic Unidata Program Center
Software Engineer III Univ. Corp for Atmospheric Research
address@hidden WWW: http://www.unidata.ucar.edu/
===============================================================================