[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
20001016: Unable to find Version 7.7 NetCDF config file
This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.
- Subject: 20001016: Unable to find Version 7.7 NetCDF config file
- Date: Fri, 20 Oct 2000 15:20:51 -0600
>From: Frederic J Chagnon <address@hidden>
>Organization: MIT
>Keywords: 200010162003.e9GK39413512 McIDAS-X 7.7 netCDF config
Frederic,
>On page 3D-19 of the McIDAS 7.7 user guide, you refer to two sample
>configuration files (netcdfgrid.cfg & netcdfpoint.cfg) that should be located
>in the ~mcidas/data directory. I amunable to find these files, both on your
>ftp site, or on my machine.
These files will be available with the McIDAS-X 7.7 release. The version
currently in distribution from Unidata is 7.6.
>Could I please have a copy of these sample config files?
I have included the 7.7 version files below:
<snip> ----------------------- netcdfgrid.cfg ---------------------------
#
# Copyright(c) 2000, Space Science and Engineering Center, UW-Madison
# Refer to "McIDAS Software Acquisition and Distribution Policies"
# in the file mcidas/data/license.txt
#
# $Id: netcdfgrid.cfg,v 1.1 2000/05/05 18:26:43 scottl Tst $
#
#
#
# This file contains an example configuration file to
# be used with the netcdf grid server
#
# Inform the netcdf server which variable names are
# associated with the x- and y- dimensions of a grid,
# the temporal dimension, and the vertical dimension
# ** dimension associations **
# Time is associated with the dimension named TIME in
# the netcdf file that this configuration file is
# used to access
#
record TIME
#
# either x or lon can be the X (horizontal) axis
# either y or lat can be the Y (horizontal) axis
#
x XHORZ
y YHORZ
lat YHORZ
lon XHORZ
#
# There are many possibilities for a name for a
# vertical variable ... level below refers to a
# pressure level (1000,950,900,850,...,200,150,100mb)
# Some variables aren't saved at each pressure level
# (absolute vorticity, for example) and the levels they
# are saved at are in level_c (1000,850,700,500,250mb)
# Other variables are saved at fhg (a _f_ixed _h_eight _a_bove
# ground (typically 2 and 10 meters); still others are
# saved at sigma levels (ls); ls_bndry_bot is a sigma level
# for the bottom of the bndry layer (e.g 0.98) and ls_bndry_top
# for the top of the bndry layer (0.84); ls_sfc_bot and
# ls_sfc_top define the top/bottom of the surface layer
# in the model (0.99 and 0.97 sigma); ls_all_top and ls_all_bot
# are the top and bottom of the model in sigma (1 and 0);
# lfhg_bot and lfhg_top are 0 and 3000 m. ls_bot and ls_top
# give predefined sigma layers (1-0.97,0.97-0.94,0.94-0.91,0.91-0.88
# and 0.88-0.85)
# So....there can be u which is saved at level, y, and x
# u_fhg which is saved at fhg, y and x
# u_ls which is saved at ls, y and x ...
# all are u components, but some are at constant p, some are at
# constant z, and some are at constant sigma.
level VERT
level_c VERT
fhg VERT
ls VERT
ls_bndry VERT
ls_sfc VERT
ls_all VERT
lfhg VERT
#
# ** parameter (variable) mappings **
# Put in the upcased name from the command line, and netcdf name
# it should map to...the netcdf name will often (but now always!)
# contain lowercase letters
# The following are used by the program to translate between what
# is entered in the sort clauses (PARAM=OMEGA) and what the netCDF
# file refers to variables as. For example, one would enter
# PARAM=PRES on the command line to access P_sfc in the netcdf
# file. Only those parameters that are mapped here can be
# succesfully accessed by the netcdf grid servers; after all,
# it does need to know what to look for.
#
PRES P_sfc
CAPE cape_sfc
W omega
OMEGA omega
TERRAIN Z_sfc
RH RH
ABV absvor
U u
V v
T T
TSIG T_ls
LI LI4_ls
LI_LS LI_ls
'TOTAL PRECIPITATION OVER ACCUMULATION INTERVAL' PRECIP
PCP PRECIP
CPRECIP precip_cn
PW pr_water_ls
CIN cin_sfc
HELICITY helc_lfhg
#
# ** Vertical Level units mapping **
hectopascals mb
# Put the (upcased) netCDF name, and follow it with the McIDAS name
# If you want to list out all of the variables in the file, all
# of the variables must be listed here!
# This part of the config file is present for the construction of the
# gridheader -- the netcdf name is selected and the mcidas name is
# extracted. There should be 1 entry for each of the netCDF variable
# names (that have x- and y- dimensions) that exist in the file.
# This is necessary for a GRDLIST to list out all the grids in
# the netcdf file (i.e., GRDLIST GRID/NETCDF NUM=ALL)
Z Z UNITS='gp m'
T T
RH RH UNITS=%
omega W UNITS=pa/s
cape_sfc CAPE LEV=SFC UNITS=J/kg
P_sfc PRES LEV=SFC UNITS=pa
PRECIP PCP
pli_lpdg LI
LI4_lpdg LI4
LI_ls LI_S LEV=SFC
LI4_ls LI
Psl_et PETA
Z_sfc TERN LEV=SFC
precip_cn PCPC
u U
v V
absvor ABV
pr_water_atm PW
pr_water_ls PWLS
u_fhg U_AG
v_fhg V_AG
u_ls USIG
v_ls VSIG
T_ls TSIG
RH_fhg RHAG
T_fhg T_AG
cin_sfc CIN LEV=SFC
cin_lpdg CINP
cin_ls CNBL
cape_lpdg CAPP
cape_ls CAPS
helc_lpdg HELC
helc_lfhg HELF
RH_lpdg RHP
u_lpdg UP
v_lpdg VP
T_lpdg TP
pr_water_ls PW LEV=SFC UNITS=kg/m2
RH_ls RHSG
#
#
# What follows is the output from the ncdump -h of the eta
# model netcdf file to which this configuration file refers.
#netcdf 97032712_eta {
#dimensions:
# record = UNLIMITED ; // (7 currently)
# level = 19 ;
# level_c = 5 ;
# fhg = 2 ;
# ls = 5 ;
# ls_bndry = 1 ;
# ls_sfc = 1 ;
# ls_all = 1 ;
# lfhg = 1 ;
# x = 93 ;
# y = 65 ;
# datetime_len = 21 ;
# nmodels = 2 ;
# accum = 2 ;
# nav = 1 ;
# nav_len = 100 ;
#variables:
# double reftime(record) ;
# reftime:long_name = "reference time" ;
# reftime:units = "hours since 1992-1-1" ;
# double valtime(record) ;
# valtime:long_name = "valid time" ;
# valtime:units = "hours since 1992-1-1" ;
# char datetime(record, datetime_len) ;
# datetime:long_name = "reference date and time" ;
# float valtime_offset(record) ;
# valtime_offset:long_name = "hours from reference time" ;
# valtime_offset:units = "hours" ;
# float level(level) ;
# level:long_name = "level" ;
# level:units = "hectopascals" ;
# float level_c(level_c) ;
# level_c:long_name = "level subset" ;
# level_c:units = "hectopascals" ;
# float fhg(fhg) ;
# fhg:long_name = "fixed height above ground" ;
# fhg:units = "meters" ;
# float ls_bot(ls) ;
# ls_bot:long_name = "bottom level of layer between 2 sigma
levels" ;
# ls_bot:units = "" ;
# float ls_top(ls) ;
# ls_top:long_name = "top level of layer between 2 sigma levels" ;
# ls_top:units = "" ;
# float ls_bndry_bot(ls_bndry) ;
# ls_bndry_bot:long_name = "bottom level of boundary layer
between 2 sigma levels" ;
# ls_bndry_bot:units = "" ;
# float ls_bndry_top(ls_bndry) ;
# ls_bndry_top:long_name = "top level of boundary layer between 2
sigma levels" ;
# ls_bndry_top:units = "" ;
# float ls_sfc_bot(ls_sfc) ;
# ls_sfc_bot:long_name = "bottom level of surface layer between 2
sigma levels" ;
# ls_sfc_bot:units = "" ;
# float ls_sfc_top(ls_sfc) ;
# ls_sfc_top:long_name = "top level of surface layer between 2
sigma levels" ;
# ls_sfc_top:units = "" ;
# float ls_all_bot(ls_all) ;
# ls_all_bot:long_name = "bottom level of atmosphere between 2
sigma levels" ;
# ls_all_bot:units = "" ;
# float ls_all_top(ls_all) ;
# ls_all_top:long_name = "top level of atmosphere between 2 sigma
levels" ;
# ls_all_top:units = "" ;
# float lfhg_bot(lfhg) ;
# lfhg_bot:long_name = "bottom level of layer between 2 fixed
heights above ground" ;
# lfhg_bot:units = "meters" ;
# float lfhg_top(lfhg) ;
# lfhg_top:long_name = "top level of layer between 2 fixed
heights above ground" ;
# lfhg_top:units = "meters" ;
# int model_id(nmodels) ;
# model_id:long_name = "generating process ID number" ;
# char nav_model(nav, nav_len) ;
# nav_model:long_name = "navigation model name" ;
# int grid_type_code(nav) ;
# grid_type_code:long_name = "GRIB-1 GDS data representation
type" ;
# char grid_type(nav, nav_len) ;
# grid_type:long_name = "GRIB-1 grid type" ;
# char grid_name(nav, nav_len) ;
# grid_name:long_name = "grid name" ;
# int grid_center(nav) ;
# grid_center:long_name = "GRIB-1 originating center ID" ;
# int grid_number(nav) ;
# grid_number:long_name = "GRIB-1 catalogued grid number" ;
# char earth_shape(nav, nav_len) ;
# earth_shape:long_name = "assumed earth shape" ;
# char x_dim(nav, nav_len) ;
# x_dim:long_name = "x dimension name" ;
# char y_dim(nav, nav_len) ;
# y_dim:long_name = "y dimension name" ;
# int Nx(nav) ;
# Nx:long_name = "number of points along x-axis" ;
# int Ny(nav) ;
# Ny:long_name = "number of points along y-axis" ;
# float La1(nav) ;
# La1:long_name = "latitude of first grid point" ;
# La1:units = "degrees_north" ;
# float Lo1(nav) ;
# Lo1:long_name = "longitude of first grid point" ;
# Lo1:units = "degrees_east" ;
# byte ResCompFlag(nav) ;
# ResCompFlag:long_name = "resolution and component flags" ;
# float Lov(nav) ;
# Lov:long_name = "orientation of the grid" ;
# Lov:units = "degrees_east" ;
# float Dx(nav) ;
# Dx:long_name = "x-direction grid length" ;
# Dx:units = "meters" ;
# float Dy(nav) ;
# Dy:long_name = "y-direction grid length" ;
# Dy:units = "meters" ;
# byte ProjFlag(nav) ;
# ProjFlag:long_name = "projection center flag" ;
# float Latin1(nav) ;
# Latin1:long_name = "first intersecting latitude" ;
# Latin1:units = "degrees_north" ;
# float Latin2(nav) ;
# Latin2:long_name = "second intersecting latitude" ;
# Latin2:units = "degrees_north" ;
# float SpLat(nav) ;
# SpLat:long_name = "latitude of the southern pole" ;
# SpLat:units = "degrees_north" ;
# float SpLon(nav) ;
# SpLon:long_name = "longitude of the southern pole" ;
# SpLon:units = "degrees_east" ;
# float LI_ls(record, ls_sfc, y, x) ;
# LI_ls:long_name = "surface lifted index" ;
# LI_ls:units = "degK" ;
# LI_ls:_FillValue = -9999.f ;
# LI_ls:navigation = "nav" ;
# float LI4_ls(record, ls_bndry, y, x) ;
# LI4_ls:long_name = "best (4 layer) lifted index" ;
# LI4_ls:units = "degK" ;
# LI4_ls:_FillValue = -9999.f ;
# LI4_ls:navigation = "nav" ;
# float PRECIP(record, y, x) ;
# PRECIP:long_name = "total precipitation over accumulation
interval" ;
# PRECIP:units = "kg/m2" ;
# PRECIP:_FillValue = -9999.f ;
# PRECIP:navigation = "nav" ;
# float PRECIP_accum_times(record, accum) ;
# PRECIP_accum_times:long_name = "precipitation accumulation
interval" ;
# PRECIP_accum_times:units = "hours" ;
# PRECIP_accum_times:_FillValue = -9999.f ;
# float P_sfc(record, y, x) ;
# P_sfc:long_name = "pressure at surface" ;
# P_sfc:units = "Pa" ;
# P_sfc:_FillValue = -9999.f ;
# P_sfc:navigation = "nav" ;
# float Psl_et(record, y, x) ;
# Psl_et:long_name = "mean sea level pressure (ETA model
reduction)" ;
# Psl_et:units = "Pa" ;
# Psl_et:_FillValue = -9999.f ;
# Psl_et:navigation = "nav" ;
# float RH(record, level, y, x) ;
# RH:long_name = "relative humidity" ;
# RH:units = "percent" ;
# RH:_FillValue = -9999.f ;
# RH:navigation = "nav" ;
# float T(record, level, y, x) ;
# T:long_name = "temperature" ;
# T:units = "degK" ;
# T:_FillValue = -9999.f ;
# T:navigation = "nav" ;
# float Z(record, level, y, x) ;
# Z:long_name = "geopotential height" ;
# Z:units = "gp m" ;
# Z:_FillValue = -9999.f ;
# Z:navigation = "nav" ;
# float Z_sfc(y, x) ;
# Z_sfc:long_name = "terrain" ;
# Z_sfc:units = "gp m" ;
# Z_sfc:_FillValue = -9999.f ;
# Z_sfc:navigation = "nav" ;
# float omega(record, level, y, x) ;
# omega:long_name = "pressure vertical velocity" ;
# omega:units = "Pa/s" ;
# omega:_FillValue = -9999.f ;
# omega:navigation = "nav" ;
# float precip_cn(record, y, x) ;
# precip_cn:long_name = "convective precipitation over
accumulation interval" ;
# precip_cn:units = "kg/m2" ;
# precip_cn:_FillValue = -9999.f ;
# precip_cn:navigation = "nav" ;
# float precip_cn_accum_times(record, accum) ;
# precip_cn_accum_times:long_name = "convective precipitation
accumulation interval" ;
# precip_cn_accum_times:units = "hours" ;
# precip_cn_accum_times:_FillValue = -9999.f ;
# float u(record, level, y, x) ;
# u:long_name = "u-component of wind" ;
# u:units = "meters/second" ;
# u:_FillValue = -9999.f ;
# u:navigation = "nav" ;
# float v(record, level, y, x) ;
# v:long_name = "v-component of wind" ;
# v:units = "meters/second" ;
# v:_FillValue = -9999.f ;
# v:navigation = "nav" ;
# float absvor(record, level_c, y, x) ;
# absvor:long_name = "absolute vorticity" ;
# absvor:units = "1/s" ;
# absvor:_FillValue = -9999.f ;
# absvor:navigation = "nav" ;
# float pr_water_ls(record, ls_all, y, x) ;
# pr_water_ls:long_name = "precipitable water" ;
# pr_water_ls:units = "kg/m2" ;
# pr_water_ls:_FillValue = -9999.f ;
# pr_water_ls:navigation = "nav" ;
# float u_fhg(record, fhg, y, x) ;
# u_fhg:long_name = "u-component of wind at fixed height above
ground" ;
# u_fhg:units = "meters/second" ;
# u_fhg:_FillValue = -9999.f ;
# u_fhg:navigation = "nav" ;
# float v_fhg(record, fhg, y, x) ;
# v_fhg:long_name = "v-component of wind at fixed height above
ground" ;
# v_fhg:units = "meters/second" ;
# v_fhg:_FillValue = -9999.f ;
# v_fhg:navigation = "nav" ;
# float RH_fhg(record, fhg, y, x) ;
# RH_fhg:long_name = "relative humidity at fixed height above
ground" ;
# RH_fhg:units = "percent" ;
# RH_fhg:_FillValue = -9999.f ;
# RH_fhg:navigation = "nav" ;
# float T_fhg(record, fhg, y, x) ;
# T_fhg:long_name = "temperature at fixed height above ground" ;
# T_fhg:units = "degK" ;
# T_fhg:_FillValue = -9999.f ;
# T_fhg:navigation = "nav" ;
# float cin_sfc(record, y, x) ;
# cin_sfc:long_name = "surface convective inhibition" ;
# cin_sfc:units = "J/kg" ;
# cin_sfc:_FillValue = -9999.f ;
# cin_sfc:navigation = "nav" ;
# float cape_sfc(record, y, x) ;
# cape_sfc:long_name = "surface convective available potential
energy" ;
# cape_sfc:units = "J/kg" ;
# cape_sfc:_FillValue = -9999.f ;
# cape_sfc:navigation = "nav" ;
# float cin_ls(record, ls_bndry, y, x) ;
# cin_ls:long_name = "boundary convective inhibition" ;
# cin_ls:units = "J/kg" ;
# cin_ls:_FillValue = -9999.f ;
# cin_ls:navigation = "nav" ;
# float cape_ls(record, ls_bndry, y, x) ;
# cape_ls:long_name = "boundary convective available potential
energy" ;
# cape_ls:units = "J/kg" ;
# cape_ls:_FillValue = -9999.f ;
# cape_ls:navigation = "nav" ;
# float helc_lfhg(record, lfhg, y, x) ;
# helc_lfhg:long_name = "helicity" ;
# helc_lfhg:units = "meters2/seconds2" ;
# helc_lfhg:_FillValue = -9999.f ;
# helc_lfhg:navigation = "nav" ;
# float RH_ls(record, ls, y, x) ;
# RH_ls:long_name = "relative humidity in boundary layer" ;
# RH_ls:units = "percent" ;
# RH_ls:_FillValue = -9999.f ;
# RH_ls:navigation = "nav" ;
# float u_ls(record, ls, y, x) ;
# u_ls:long_name = "u-component of wind in boundary layer" ;
# u_ls:units = "meters/second" ;
# u_ls:_FillValue = -9999.f ;
# u_ls:navigation = "nav" ;
# float v_ls(record, ls, y, x) ;
# v_ls:long_name = "v-component of wind in boundary layer" ;
# v_ls:units = "meters/second" ;
# v_ls:_FillValue = -9999.f ;
# v_ls:navigation = "nav" ;
# float T_ls(record, ls, y, x) ;
# T_ls:long_name = "temperature in boundary layer" ;
# T_ls:units = "degK" ;
# T_ls:_FillValue = -9999.f ;
# T_ls:navigation = "nav" ;
#
#// global attributes:
# :record = "reftime, valtime" ;
# :ls = "ls_bot, ls_top" ;
# :ls_bndry = "ls_bndry_bot, ls_bndry_top" ;
# :ls_sfc = "ls_sfc_bot, ls_sfc_top" ;
# :ls_all = "ls_all_bot, ls_all_top" ;
# :lfhg = "lfhg_bot, lfhg_top" ;
# :history = "created by gribtonc from HDS broadcast" ;
# :title = "NCEP Global Product Set" ;
# :Conventions = "NUWG" ;
# :version = 0. ;
#}
<snip> ----------------------- netcdfgrid.cfg ---------------------------
<snip> ----------------------- netcdfpoint.cfg ---------------------------
#
#
# Copyright(c) 2000, Space Science and Engineering Center, UW-Madison
# Refer to "McIDAS Software Acquisition and Distribution Policies"
# in the file mcidas/data/license.txt
#
# $Id: netcdfpoint.cfg,v 1.2 2000/05/05 18:24:13 scottl Tst $
#
#
# This is a template for a point netcdf config file in
# ~mcidas/data. The netcdf file that this config
# file helps describe is also in ~mcidas/data and
# is called netcdfbuoy.nc; it contains buoy data.
# The dsserve command that should be entered to link
# the netcdf file to the PT* commands in McIDAS is:
# DSSERVE ADD PT/EXAMPLE NCDF
# DIRFILE=~/mcidas/data/netcdfbuoy.nc
# INFO=~/mcidas/data/netcdfpoint.cfg
# A PTLIST PT/EXAMPLE PAR=p1 p2 SEL='SELECT strings'
# will then return data as expected.
#
# Enter first the McIDAS command-line name, the units, the
# precision (2 below means 2 decimal places) and then
# the name of the netcdf variable in the file that
# is to match the McIDAS variable name
# Note that case matters for netcdf variable names
# Also note that it is not necessary to include all variables
# in the netcdf file in this configuration file; one
# need include only those that the user wants to see
# listed using McIDAS...if you request a parameter not
# listed in the configuration file, the PT* commands
# will return PTLIST: Invalid return parameter requested
#
LAT DEG 4 Lat
LON DEG 4 Lon
# Here (IDN) is an example of an integer value
IDN X 0 buoy
# Here (ID) is an example of a character value
ID CHAR 0 ship
# Note that time sometimes returns in netcdf units (seconds past a date)
TIME HMS 0 time_obs
SPD KTS 2 meanWind
VIS M 2 VIS
DIR M 1 DIR
T C 2 T
RH PCT 1 humidity
TD C 2 TD
PSL MB 1 SLP
P MB 1 PRES
DPDT MB 1 Ptend
PCP MM 1 PRECIP_amt
TW C 1 Tw
#
# The following lines are the output from the ncdump -h on the
# netcdf file to which this configuration file refers
#netcdf netcdfbuoy {
#dimensions:
# recNum = UNLIMITED ; // (2 currently)
# rep_type_len = 4 ;
# ship_call_len = 5 ;
# maxLevel = 15 ;
# r_len = 256 ;
#variables:
# char rep_type(recNum, rep_type_len) ;
# rep_type:long_name = "Report type" ;
# rep_type:reference = "WMO #306, FM 13-X and FM 18-IX" ;
# int zone(recNum) ;
# zone:long_name = "Buoy zone" ;
# zone:_FillValue = -99999 ;
# zone:reference = "Table 0161" ;
# int buoy(recNum) ;
# buoy:long_name = "Buoy number" ;
# buoy:_FillValue = -99999 ;
# char ship(recNum, ship_call_len) ;
# ship:long_name = "Ship call" ;
# int time_obs(recNum) ;
# time_obs:long_name = "time of Observation" ;
# time_obs:_FillValue = -99999 ;
# time_obs:units = "seconds since 1970-01-01 00 UTC" ;
# int time_nominal(recNum) ;
# time_nominal:long_name = "time nominal" ;
# time_nominal:_FillValue = -99999 ;
# time_nominal:units = "seconds since 1970-01-01 00 UTC" ;
# float Lat(recNum) ;
# Lat:long_name = "Buoy/Ship latitude" ;
# Lat:_FillValue = -99999.f ;
# Lat:valid_range = -90., 90. ;
# Lat:units = "degrees" ;
# float Lon(recNum) ;
# Lon:long_name = "Buoy/Ship longitude" ;
# Lon:_FillValue = -99999.f ;
# Lon:valid_range = -180., 180. ;
# Lon:units = "degrees" ;
# int qPos(recNum) ;
# qPos:long_name = "Quality control of Position" ;
# qPos:_FillValue = -99999 ;
# qPos:reference = "Table 3334" ;
# int qTime(recNum) ;
# qTime:long_name = "Quality control of Time" ;
# qTime:_FillValue = -99999 ;
# qTime:reference = "Table 3334" ;
# int S1qCntrl(recNum) ;
# S1qCntrl:long_name = "Quality control of Sec 1" ;
# S1qCntrl:_FillValue = -99999 ;
# S1qCntrl:reference = "Table 3334" ;
# int S1qPos(recNum) ;
# S1qPos:long_name = "Quality control position of Sec 1" ;
# S1qPos:_FillValue = -99999 ;
# int stnType(recNum) ;
# stnType:long_name = "Type of station operation" ;
# stnType:_FillValue = -99999 ;
# stnType:reference = "Table 1860" ;
# int meanWind(recNum) ;
# meanWind:long_name = "Highest mean wind speed" ;
# meanWind:_FillValue = -99999 ;
# meanWind:reference = "Table 3778" ;
# int VIS(recNum) ;
# VIS:long_name = "Horizontal visibility" ;
# VIS:_FillValue = -99999 ;
# VIS:reference = "Table 4377" ;
# int cloudCover(recNum) ;
# cloudCover:long_name = "Total cloud cover in oktas" ;
# cloudCover:_FillValue = -99999 ;
# cloudCover:reference = "Table 2700" ;
# int DIR(recNum) ;
# DIR:long_name = "Buoy/Ship Direction" ;
# DIR:_FillValue = -99999 ;
# DIR:valid_range = 0, 360 ;
# DIR:units = "degrees" ;
# float SPD(recNum) ;
# SPD:long_name = "Buoy/Ship Speed" ;
# SPD:_FillValue = -99999.f ;
# SPD:units = "meters/sec" ;
# float T(recNum) ;
# T:long_name = "Air Temperature to tenths" ;
# T:_FillValue = -99999.f ;
# T:units = "Celsius" ;
# int humidity(recNum) ;
# humidity:long_name = "Humidity" ;
# humidity:_FillValue = -99999 ;
# humidity:units = "percent" ;
# float TD(recNum) ;
# TD:long_name = "Dew-point Air temperature to tenths" ;
# TD:_FillValue = -99999.f ;
# TD:units = "Celsius" ;
# float PRES(recNum) ;
# PRES:long_name = "Buoy/Ship level pressure" ;
# PRES:_FillValue = -99999.f ;
# PRES:units = "millibars" ;
# float SLP(recNum) ;
# SLP:long_name = "Sea level pressure" ;
# SLP:_FillValue = -99999.f ;
# SLP:units = "millibars" ;
# int char_Ptend(recNum) ;
# char_Ptend:long_name = "Character Pressure tendency" ;
# char_Ptend:_FillValue = -99999 ;
# char_Ptend:units = "0|1|2|3|4|5|6|7|8 Table 12-5" ;
# float Ptend(recNum) ;
# Ptend:long_name = "Change in Pressure in past 3 hours" ;
# Ptend:_FillValue = -99999.f ;
# Ptend:units = "millibars" ;
# float PRECIP_amt(recNum) ;
# PRECIP_amt:long_name = "Precipitation amount" ;
# PRECIP_amt:_FillValue = -99999.f ;
# PRECIP_amt:units = "mm" ;
# PRECIP_amt:reference = "Table 3590" ;
# int PRECIP_period(recNum) ;
# PRECIP_period:long_name = "Precipitation Period" ;
# PRECIP_period:_FillValue = -99999 ;
# PRECIP_period:units = "hours" ;
# PRECIP_period:reference = "Table 4019" ;
# int WXpresent(recNum) ;
# WXpresent:long_name = "Present weather" ;
# WXpresent:_FillValue = -99999 ;
# WXpresent:reference = "Manned stn Table 4677, auto Table 4680" ;
# int WXpast(recNum) ;
# WXpast:long_name = "Past weather" ;
# WXpast:_FillValue = -99999 ;
# WXpast:reference = "Manned stn Table 4561, auto Table 4531" ;
# int cloudLow(recNum) ;
# cloudLow:long_name = "Lower level clouds" ;
# cloudLow:_FillValue = -99999 ;
# cloudLow:reference = "Table 0513" ;
# int cloudMiddle(recNum) ;
# cloudMiddle:long_name = "Middle level clouds" ;
# cloudMiddle:_FillValue = -99999 ;
# cloudMiddle:reference = "Table 0515" ;
# int cloudHigh(recNum) ;
# cloudHigh:long_name = "Higher level clouds" ;
# cloudHigh:_FillValue = -99999 ;
# cloudHigh:reference = "Table 0509" ;
# int S2qCntrl(recNum) ;
# S2qCntrl:long_name = "Quality control of Sec 2" ;
# S2qCntrl:_FillValue = -99999 ;
# S2qCntrl:reference = "Table 3334" ;
# int S2qPos(recNum) ;
# S2qPos:long_name = "Quality control position of Sec 2" ;
# S2qPos:_FillValue = -99999 ;
# int shipTrueDIR(recNum) ;
# shipTrueDIR:long_name = "Ship\'s True direction" ;
# shipTrueDIR:_FillValue = -99999 ;
# shipTrueDIR:reference = "Table 0700" ;
# int shipAvgSPD(recNum) ;
# shipAvgSPD:long_name = "Ship\'s Avg speed" ;
# shipAvgSPD:_FillValue = -99999 ;
# shipAvgSPD:reference = "Table 4451" ;
# float Tw(recNum) ;
# Tw:long_name = "Water Temperature to tenths" ;
# Tw:_FillValue = -99999.f ;
# Tw:units = "Celsius" ;
# int Pwa(recNum) ;
# Pwa:long_name = "Period of waves" ;
# Pwa:_FillValue = -99999 ;
# Pwa:units = "seconds" ;
# int Hwa(recNum) ;
# Hwa:long_name = "Height of waves" ;
# Hwa:_FillValue = -99999 ;
# Hwa:units = "meters" ;
# float Hwa_tenths(recNum) ;
# Hwa_tenths:long_name = "Height of waves" ;
# Hwa_tenths:_FillValue = -99999.f ;
# Hwa_tenths:units = "meters" ;
# int swellDIR1(recNum) ;
# swellDIR1:long_name = "Direction of swells" ;
# swellDIR1:_FillValue = -99999 ;
# swellDIR1:units = "degrees" ;
# float Ps1(recNum) ;
# Ps1:long_name = "Period of swells" ;
# Ps1:_FillValue = -99999.f ;
# Ps1:units = "seconds" ;
# float Hs1(recNum) ;
# Hs1:long_name = "Height of swells" ;
# Hs1:_FillValue = -99999.f ;
# Hs1:units = "meters" ;
# int ICE(recNum) ;
# ICE:long_name = "Sea ice or ice of land origin" ;
# ICE:_FillValue = -99999 ;
# float Tmax(recNum) ;
# Tmax:long_name = "Max Air Temperature to tenths" ;
# Tmax:_FillValue = -99999.f ;
# Tmax:units = "Celsius" ;
# float Tmin(recNum) ;
# Tmin:long_name = "Min Air Temperature to tenths" ;
# Tmin:_FillValue = -99999.f ;
# Tmin:units = "Celsius" ;
# int groundState(recNum) ;
# groundState:long_name = "State of ground" ;
# groundState:_FillValue = -99999 ;
# groundState:reference = "Table 0975" ;
# int snowDepth(recNum) ;
# snowDepth:long_name = "Snow depth" ;
# snowDepth:_FillValue = -99999 ;
# snowDepth:units = "Centimeters" ;
# snowDepth:reference = "Table 3889" ;
# float PRECIP_amt24(recNum) ;
# PRECIP_amt24:long_name = "Precipitation amount last 24 hours" ;
# PRECIP_amt24:_FillValue = -99999.f ;
# PRECIP_amt24:units = "mm" ;
# int cloudObsured(recNum) ;
# cloudObsured:long_name = "Total cloud cover in oktas" ;
# cloudObsured:_FillValue = -99999 ;
# cloudObsured:reference = "Table 2700" ;
# int cloudGenus(recNum) ;
# cloudGenus:long_name = "Cloud genus" ;
# cloudGenus:_FillValue = -99999 ;
# cloudGenus:reference = "Table 0500" ;
# int cloudHeight(recNum) ;
# cloudHeight:long_name = "Cloud Height in meters" ;
# cloudHeight:_FillValue = -99999 ;
# cloudHeight:reference = "Table 1677" ;
# int Qn(recNum) ;
# Qn:long_name = "Quality control of satellite transmission" ;
# Qn:_FillValue = -99999 ;
# Qn:reference = "Table 3313" ;
# int Ql(recNum) ;
# Ql:long_name = "Quality control of location" ;
# Ql:_FillValue = -99999 ;
# Ql:reference = "Table 3311" ;
# int time_position(recNum) ;
# time_position:long_name = "Time at last known position" ;
# time_position:_FillValue = -99999 ;
# time_position:units = "seconds since 1970-01-01 00 UTC" ;
# int drogueType(recNum) ;
# drogueType:long_name = "drogue Type" ;
# drogueType:_FillValue = -99999 ;
# int cableLength(recNum) ;
# cableLength:long_name = "cable length" ;
# cableLength:_FillValue = -99999 ;
# cableLength:units = "meters" ;
# char report(recNum, r_len) ;
# report:long_name = "Originial report" ;
# report:_FillValue = "" ;
# report:reference = "max length 256" ;
#
#// global attributes:
# :title = "BUOY definition" ;
# :version = 1.1 ;
#}
<snip> ----------------------- netcdfpoint.cfg ---------------------------
>Thanks.
There is no guarantee that the netCDF access will work 100% correctly in
McIDAS-X 7.7. I will be interested in hearing about your experiences
in using it.
>Frederic Chagnon (617)253-5483
>Ralph M. Parsons Laboratory 48-212
>Massachusetts Institute of Technology
>Cambridge MA 02139
Tom Yoksas
- Prev by Date: 20001020: McIDAS-X SCHEMA registration
- Next by Date: 20001023: McIDAS-X 7.7 ADDE dataset configuration (cont.)
- Previous by thread: 20001020: McIDAS-X SCHEMA registration
- Next by thread: 20001023: McIDAS-X 7.7 ADDE dataset configuration (cont.)
- Index(es):