[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ldm upgrade...acting odd

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: Re: ldm upgrade...acting odd
  • Date: Wed, 15 Jun 2005 12:38:16 -0600
Gabe,

>Date: Wed, 15 Jun 2005 14:24:13 -0400 (EDT)
>From: Gabe Langbauer <address@hidden>
>Organization: Ohio State University
>To: Steve Emmerson <address@hidden>
>Subject: ldm upgrade...acting odd

The above message contained the following:

> I just upgraded yesterday from 6.1.0 to 6.3.0 on 
> twister.sbs.ohio-state.edu.  I checked your rtstats and it verified that 
> I'm running 6.3.0.  In addition when I start ldm I get a message such as:
> The product-queue is OK.
> /usr/local/ldm/ldm-6.3.0/etc/pqact.conf is syntactically correct
> Further confirming that I'm running 6.3
> 
> However, a couple of interesting (and quite annoying) things are occuring.
> 
> 1) Despite the previous message I showed you, it has become apparent that 
> the pqact that is being used is /usr/local/ldm/ldm-6.1.0/etc/pqact.conf
> 
> 2) The data directory is still clearly /usr/local/ldm/ldm-6.1.0/data
> despite my best efforts to change it to /var/data/ldm/data (a more 
> universal path in my opinion)
> 
> I upgraded at the same time on polarmet12.mps.ohio-state.edu and have NOT 
> found these same problems.  I'm sure I'm missing something rather trivial 
> but cannot figure what it may be.
> 
> Any thoughts/suggestions/help would be greatly appreciated.

I'll need some additional information.  Please do the following:

    1.  Become the LDM user in their home directory.

    2.  Send me the outputs of the commands

            echo $PATH
            ls -l
            ldmadmin config

> --Gabe Langbauer

Regards,
Steve Emmerson
LDM Developer