[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

19990428: ldm start-up problems

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: 19990428: ldm start-up problems
  • Date: Wed, 28 Apr 1999 16:11:32 -0600
Jeff,
The assertion failed messages in your log file mean that the product queue
got corrupted- probably because the system was in the middle of writing data
when the system was powered down.

You need to remove the old queue and recreate the product queue.

Make sure you have stopped any running ldm programs, then:
ldmadmin delqueue
ldmadmin mkqueue

Then you can retry your start:
ldmadmin start

Steve Chiswell
Unidata User Support


>From: Jeffrey Logsdon <address@hidden>
>Organization: .
>Keywords: 199904282151.PAA29044

>--PART.BOUNDARY.noaamh1.6a56.372782ee.0001
>Content-Type: text/plain; charset=us-ascii
>Content-Disposition: inline
>
>---------------------------- Forwarded with Changes --------------------------
> -
>From: address@hidden at EXTERNAL
>Date: 4/27/99 10:10PM
>To: Jeffrey Logsdon at W-CR-IWX
>Subject: BOUNCE address@hidden:    Non-member submission
>------------------------------------------------------------------------------
> -
>
>--PART.BOUNDARY.noaamh1.6a56.372782ee.0001
>Content-Type: text/plain; charset=us-ascii
>Content-Disposition: inline
>
>
>     
>
>
>     
> <0647837266E00003*/c=US/admd=ATTMAIL/prmd=GOV+NOAA/o=CCNWS/s=Logsdon/g=Jeffre
> y/
>@MHS>
>Date: 27 Apr 1999 22:10:08 -0400
>From: Jeffrey Logsdon <address@hidden> 
>To: address@hidden
>Subject: startup problems
>     
>     
>     
>     I'm running LDM 5.0.5 using HPUX 10.2 with a data feed from AFOS. 
>     Recently, someone hit the reset button without doing an orderly 
>     shutdown and I have been unable to get ldm to run since. Here's a few 
>     lines from the log file:
>     
>     rpc.ldmd[24496]: Starting Up (built: Aug 13 1997 13:35:58) 
>     pqing[24499]: Starting Up
>     pqexpire[24497]: Starting Up
>     pqexpire[24497]: assertion "status != NULL" failed: file "pq.c", line 399
> 2 
>     pqact[24498]: Starting Up
>     pqing[24499]: TERMIOS "/dev/tty0p0": 9600 baud, none parity 
>     rpc.ldmd[24496]: child 24497 terminated by signal 6 
>     pqing[24499]: Interrupt
>     udp.ldmd[24500]: Interrupt
>     pqact[24498]: Interrupt
>     rpc.ldmd[24496]: Interrupt
>     localhost[24505]: Interrupt
>     
>     I tried to do an orderly shutdown and reboot to see if that would 
>     clear any stray processes but still no luck. Any suggestions?
>     
>     Jeff Logsdon
>     NWSO IWX, Northern Indiana
>     address@hidden
>
>--PART.BOUNDARY.noaamh1.6a56.372782ee.0001--
>