[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TIGGE #BGR-338705]: A problem when perform LDM tests

This archive contains answers to questions sent to Unidata support through mid-2025. Note that the archive is no longer being updated. We provide the archive for reference; many of the answers presented here remain technically correct, even if somewhat outdated. For the most up-to-date information on the use of NSF Unidata software and data services, please consult the Software Documentation first.

  • Subject: [TIGGE #BGR-338705]: A problem when perform LDM tests
  • Date: Wed, 18 Jul 2007 13:02:57 -0600
Hi YangXin,

I apologize for not being able to get back to you before today.  I was involved 
in
our Policy Committee meeting for the past two days...

The latencies reported by yakov for EXP feed type products leads
me to believe that the LDM transfer over port 388 from your machine to yakov is 
working
well (i.e., no packet shaping).  I suggest that it is time to switch to use of 
port
388 exclusively.

What is disturbing, however, is the latency being reported for products 
injected on
tigge-ldm.cma.gov.cn  (indicated by the label 
'tigge-ldm.cma.gov.cn_v_yangxin.cma.gov.cn').
The baseline latency of approximately 900 seconds indicates that the clock on
tigge-ldm.cma.gov.cn is off by about 900 seconds.  Can you investigate the
clock setup on tigge-ldm.cma.gov.cn and correct it?  Thanks in advance...

Cheers,

Tom
****************************************************************************
Unidata User Support                                    UCAR Unidata Program
(303) 497-8642                                                 P.O. Box 3000
address@hidden                                   Boulder, CO 80307
----------------------------------------------------------------------------
Unidata HomePage                       http://www.unidata.ucar.edu
****************************************************************************


Ticket Details
===================
Ticket ID: BGR-338705
Department: Support IDD TIGGE
Priority: Normal
Status: Closed